MEA1608LE100TA0G

E M C C o m p o n e n t s 3-terminal filters, SMD array Differential signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-LE series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MEA1608LE type FEATURES LC filter with dual circuit formation differential lines (D+ and D–) for high-density mounting. Low profile type with a thickness of 0.5mm. Can reduce radiation noise generated from differential signal lines (LVDS, MIPI, MDDI). Effective as a desensitization countermeasure for digital terrestrial broadcasts (UHF band). Operating temperature range: –40 to +85°C APPLICATION Noise removal for differential transmission lines (MIPI, etc.) of various mobile devices. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MEA 1608 LE 360 T A0G Series name L×W×T dimensions 1.6×0.8×0.5 mm Product internal code Capacitance (pF) Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Capacitance Cutoff frequency Insertion loss 20dB Rated voltage Rated current Part No. (V)max. 6.3 6.3 6.3 6.3 (mA)max. 50 50 50 50 MEA1608LE360TA0G MEA1608LE220TA0G MEA1608LE150TA0G MEA1608LE100TA0G frequency range (pF) 36 22 15 10 (MHz)typ. 180(Sdd) 270(Sdd) 390(Sdd) 550(Sdd) (MHz) -— -— -— -— Measurement equipment Measurement item Product No. Frequency characteristics N5230C ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190207 3tf_commercial_signal_mea1608le_en.fm E M C C o m p o n e n t s MEA1608LE type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 220 Sdd 150 Sdd 10 Insertion loss (dB) 360 Sdd 100 Sdd 100 Scc 20 150 Scc 30 220 Scc 360 Scc 40 50 60 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer N5230C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190207 3tf_commercial_signal_mea1608le_en.fm E M C C o m p o n e n t s MEA1608LE type SHAPE & DIMENSIONS GND GND 0.4±0.05 0.4±0.05 0.5±0.1 0.4±0.05 E 2.0±0.5 CH4 ø60min. CH3 0.8±0.1 0.2±0.1 CH2 REEL DIMENSIONS 0.05min. 1.6±0.1 CH1 PACKAGING STYLE 0.15min. 0.2±0.1 1.0 Dimensions in mm 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 RECOMMENDED LAND PATTERN 14.4max. ø180±2.0 2.0 Dimensions in mm 1.5 +0.1 –0 2.0±0.05 1.75±0.1 Sprocket hole 0.25±0.05 0.4 4.0±0.1 0.04 3.5±0.05 TAPE DIMENSIONS 0.5 0.35 0.15 0.15 to 0.2 0.025 0.2 to 0.25 B Dimensions in mm CIRCUIT DIAGRAM CH1 CH2 CH3 D 8.0±0.3 0.35 K A Cavity 4.0±0.1 Dimensions in mm CH4 Type MEA1608LE G 160min. RECOMMENDED REFLOW PROFILE Preheating Soldering A 1.00±0.10 Taping B 1.80±0.10 K 1.0max. 200min. Natural cooling Peak 300min. Drawing direction 250 to 260°C Temperature 230°C 230°C Dimensions in mm 180°C PACKAGE QUANTITY 10s max. 150°C 60 to 120s 30 to 60s Time Package quantity 4,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –40 to +85 °C –40 to +85 °C  The storage temperature range is for after the assembly. Individual weight 3.5 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190207 3tf_commercial_signal_mea1608le_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190207 3tf_commercial_signal_mea1608le_en.fm