MEA1608PE540TA0G

E M C C o m p o n e n t s 3-terminal filters, SMD array Signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-PE series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MEA1608PE type FEATURES Single chip for 4-line filters, and compatible with high-density mounting. Compact with a low profile design. Effective as a desensitization countermeasure in information transmission terminals such as smart phones. Can be used for signal lines of mobile device displays. Operating temperature range: –40 to +85°C APPLICATION Noise removal from signal lines of smart phones, digital cameras, PCs, game machines, flat TVs, etc. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MEA 1608 PE 360 T A0G Series name L×W×T dimensions 1.6×0.8×0.5 mm Product internal code Capacitance (pF) Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Capacitance Cutoff frequency Insertion loss 20dB Rated voltage Rated current Part No. (V)max. 6.3 6.3 6.3 6.3 (mA)max. 100 100 100 100 MEA1608PE360TA0G MEA1608PE270TA0G MEA1608PE220TA0G MEA1608PE150TA0G frequency range (pF) 36 27 22 15 (MHz)typ. 220 240 250 270 (MHz) 470 to 3000 470 to 3000 470 to 3000 — Measurement equipment Measurement item Product No. Capacitance 4294A Frequency characteristics N5230C ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190207 3tf_commercial_signal_mea1608pe_en.fm E M C C o m p o n e n t s MEA1608PE type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 10 Insertion loss (dB) 20 30 40 50 150 270 60 360 220 70 80 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer N5230C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190207 3tf_commercial_signal_mea1608pe_en.fm E M C C o m p o n e n t s MEA1608PE type SHAPE & DIMENSIONS CH3 GND GND 0.4±0.05 ø60min. 0.4±0.05 0.5±0.1 0.4±0.05 E 2.0±0.5 CH4 0.8±0.1 0.15min. 0.2±0.1 1.0 Dimensions in mm 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 RECOMMENDED LAND PATTERN 14.4max. ø180±2.0 2.0 Dimensions in mm TAPE DIMENSIONS Sprocket hole 0.25±0.05 0.4 0.04 1.5 +0.1 –0 2.0±0.05 1.75±0.1 0.5 0.35 0.15 0.15 to 0.2 0.025 0.2 to 0.25 4.0±0.1 3.5±0.05 0.2±0.1 CH2 REEL DIMENSIONS 0.05min. 1.6±0.1 CH1 PACKAGING STYLE 8.0±0.3 0.35 B Dimensions in mm CIRCUIT DIAGRAM CH1 CH2 CH3 K A Cavity 4.0±0.1 Dimensions in mm CH4 GND Type MEA1608PE GND 160min. RECOMMENDED REFLOW PROFILE Preheating Soldering A 1.00±0.10 Taping B 1.80±0.10 K 1.0max. 200min. Natural cooling Peak 300min. Drawing direction 250 to 260°C Temperature 230°C 230°C Dimensions in mm PACKAGE QUANTITY Package quantity 180°C 4,000 pcs/reel 10s max. 150°C TEMPERATURE RANGE, INDIVIDUAL WEIGHT 60 to 120s 30 to 60s Time Operating Storage temperature range temperature range –40 to +85 °C –40 to +85 °C  The storage temperature range is for after the assembly. Individual weight 3.5 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190207 3tf_commercial_signal_mea1608pe_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190207 3tf_commercial_signal_mea1608pe_en.fm