MEA2010LD120T002

Discontinue Issue Date Last Purchase Order Date Last Shipment Date Aug. 5, 2019 Mar. 31, 2021 Sep. 30, 2021 E M C • Please refer to our Web site about replacement information. C o m p o n e n t s 3-terminal filters, SMD array Differential signal line (cellular band compatible) MEA-LD series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free pr od u st cts op w pe il d lb pr e od or uc ha tio ve n be en MEA2010LD type FEATURES LC filter with differential lines (D+ and D–) for high-density mounting. Compact with a low profile design. Can reduce radiation noise generated from differential signal lines (LVDS, MIPI, MDDI). Effective as a desensitization countermeasure in information transmission terminals such as smart phones. Operating temperature range: –40 to +85°C APPLICATION Noise removal for differential transmission lines (MIPI, etc.) of various mobile devices. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MEA Series name 2010 LD 220 T 002 L×W×T dimensions 2.0×1.0×0.5 mm Product internal code Capacitance (pF) Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Capacitance (pF) 22 17 12 Cutoff frequency Rated voltage Rated current Part No. (MHz)typ. 240(Sdd) 330(Sdd) 430(Sdd) (V)max. 6.3 6.3 6.3 (mA)max. 100 100 100 MEA2010LD220T002 MEA2010LD170T002 MEA2010LD120T002 Measurement equipment Manufacturer Keysight Technologies Keysight Technologies Th e Measurement item Product No. Capacitance 4294A Frequency characteristics N5230C ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190807 3tf_commercial_signal_mea2010ld_en.fm E M C C o m p o n e n t s MEA2010LD type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS Insertion loss (dB) 10 20 30 pr od u st cts op w pe il d lb pr e od or uc ha tio ve n be en 0 220 Scc 150 Sdd 40 220 Sdd 170 Scc 120 Scc 50 60 10 100 1000 100 Sdd 10000 Frequency (MHz) Measurement equipment Th e Product No. Manufacturer N5230C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190807 3tf_commercial_signal_mea2010ld_en.fm E M C C o m p o n e n t s MEA2010LD type SHAPE & DIMENSIONS 0.10min. CH4 GND 0.5±0.1 0.5±0.1 0.5±0.1 0.5±0.1 E 2.0±0.5 ø60min. GND CH3 1.0±0.15 0.15min. 1.0 Dimensions in mm 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 RECOMMENDED LAND PATTERN Dimensions in mm 0.25 2.80 1.60 1.80 0.60 TAPE DIMENSIONS Sprocket hole 0.50 14.4max. ø180±2.0 1.5 +0.1 –0 2.0±0.05 4.0±0.1 3.5±0.05 0.25±0.1 1.75±0.1 0.25 B 8.0±0.3 0.25±0.1 CH2 REEL DIMENSIONS pr od u st cts op w pe il d lb pr e od or uc ha tio ve n be en 2.0±0.15 CH1 PACKAGING STYLE Dimensions in mm K A Cavity 4.0±0.1 CIRCUIT DIAGRAM CH1 CH2 CH3 Dimensions in mm CH4 Type MEA2010LD GND A 1.15±0.05 B 2.15±0.05 K 1.0max. GND 160min. Taping 200min. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Drawing direction 300min. Peak 250 to 260°C Th e Temperature Dimensions in mm 230°C 230°C PACKAGE QUANTITY Package quantity 4,000 pcs/reel 180°C 10s max. 150°C 60 to 120s 30 to 60s TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –40 to +85 °C –40 to +85 °C  The storage temperature range is for after the assembly. Individual weight 5 mg Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190807 3tf_commercial_signal_mea2010ld_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. pr od u st cts op w pe il d lb pr e od or uc ha tio ve n be en SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. Th e (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190807 3tf_commercial_signal_mea2010ld_en.fm