MEA3216L101R

(1/2) 3-terminal Filters(SMD Array) For General Signal Line Conformity to RoHS Directive MEA Series MEA3216L Type PRODUCT IDENTIFICATION FEATURES • Own unique 4-line multilayer L-type 3-terminal filter array. • Tape packaging allows use by automatic assembly equipment. • Entirely monolithic structure is almost unaffected by crosstalk. MEA 3216 L 50R0 T (1) (2) (3) (4) (5) APPLICATIONS RGB and signal lines of data terminals, computing and communications devices, color liquid crystal displays, printers, DVDs, electronic games, portable audio-visual equipment, etc. (4)Cutoff freguency (MHz) (2)Dimensions L× W (3)L type circuit 50R0:fc=50MHz (5)Packaging style T:Taping PACKAGING STYLE AND QUANTITIES Packaging style Taping TEMPERATURE RANGES Operating/Storage (1)Series name Quantity 2000 pieces/reel –40 to +85°C GND GND IN3 2.85 0.65 IN4 GND GND OUT1 OUT2 OUT3 OUT4 Ch1 Ch2 Ch3 Ch4 OUT1 OUT2 OUT3 OUT4 0.8±0.1 0.8±0.1 0.8±0.1 0.2 0.45 0.35 0.125 0.85±0.15 0.2min. (0.4typ.) 0.2min. 0.1min. 0.65 IN2 2.2 IN1 0.125 0.9 IN4 0.65 IN3 0.45 IN2 ;;;;;;; ;;;;; 0.2min. (0.5typ.) IN1 4.15 0.65 1.6±0.2 3.2±0.2 Marking 0.1min. SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BORARD PATTERN Dimensions in mm Weight: 26mg Dimensions in mm ELECTRICAL CHARACTERISTICS Cutoff frequency (MHz)typ. 25 50 75 100 Part No. MEA3216L25R0 MEA3216L50R0 MEA3216L75R0 MEA3216L101R Attenuation 20dB frequency range (MHz) 300 to 1000 500 to 1000 500 to 800 500 to 600 Rated voltage (V)max. 10 10 10 10 Rated current (mA)max. 100 100 100 100 • TEST EQUIPMENT HP-8753B NETWORK ANALYZER, or equivalant HP-85046A S-PARAMETER TEST SET, or equivalant TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS MEA3216L50R0: Crosstalk(50Ω System) 20 0 MEA3216L50R0 MEA3216L75R0 MEA3216L101R –20 Attenuation (dB) Attenuation (dB) 0 –20 MEA3216L25R0 –40 –40 –60 –60 Ch2-3 Ch1-2 –80 1 10 100 Frequency (MHz) 1000 10000 –80 1 10 100 Frequency (MHz) 1000 10000 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) • All specifications are subject to change without notice. 005-01 / 20090224 / e9621_mea.fm (2/2) RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260˚C Natural cooling 230˚C 180˚C 150˚C Preheating 60 to 120s Soldering 30 to 60s Time(s) TYPICAL APPLICATIONS Multilayer chip bead MEA3216L MPZ2012 Large current type for power line MMZ1608 Large current type for signal line EMC of RGB signal lines of TFT color liquid crystal displays R Controller B Gate Driver Source Driver TFT LCD PANEL G MMZ1608 Source Driver Hsync Vsync CLK MPZ2012 Backlight DC to DC Converter Vcc Vcc offset +5V (ON/OFF) D/A Inverter MPZ2012 Power Source (TFT) • All specifications are subject to change without notice. 005-01 / 20090224 / e9621_mea.fm