MEM1608D301R

E M C C o m p o n e n t s 3-terminal filters High-speed signal line MEM-D series REACH SVHC-Free RoHS Cl Br Pb Halogen Free Lead Free MEM1608D type FEATURES Multilayer chip EMC filter with an L-type circuit. Monolithic structure makes it highly reliable. Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk. Has sharp attenuation characteristics with excellent EMC suppression. Covers a wide frequency. MEM1608D is a coil type. Low profile type with a height of 0.6mm. Operating temperature range: –40 to +85°C APPLICATION PCs and peripheral devices, VTRs, TVs, printers, game machines, etc. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MEM 1608 D 201R T 001 Series name L×W×T dimensions 1.6×0.8×0.6 mm Product internal code Cutoff frequency (MHz) Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency Rated voltage Rated current Part No. (MHz) 200 300 400 500 (V)max. 6.3 6.3 6.3 6.3 (mA)max. 200 200 200 200 MEM1608D201RT001 MEM1608D301RT001 MEM1608D401RT001 MEM1608D501RT001 Measurement equipment Measurement item Product No. Frequency characteristics N5230C ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190207 3tf_commercial_signal_mem1608d_en.fm E M C C o m p o n e n t s MEM1608D type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 5 201R 10 Insertion loss (dB) 15 501R 301R 401R 20 25 30 35 40 45 50 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer N5230C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190207 3tf_commercial_signal_mem1608d_en.fm E M C C o m p o n e n t s MEM1608D type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 1.6±0.1 GND 4 E 0.8±0.1 0.1min. 2.0±0.5 1 IN/OUT 2 GND 3 OUT/IN 0.6±0.1 ø60min. 0.225min. 0.225min. 0.3±0.1 0.25±0.1 0.3±0.1 1.0 Dimensions in mm 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 RECOMMENDED LAND PATTERN 14.4max. ø180±2.0 Dimensions in mm 0.9 1.5 +0.1 –0 2.0±0.05 4.0±0.1 3.5±0.05 Sprocket hole 0.3 1.75±0.1 TAPE DIMENSIONS 0.2 1.2 0.8 0.1 8.0±0.3 2.0 B Dimensions in mm CIRCUIT DIAGRAM A K Cavity 4.0±0.1 Dimensions in mm Type MEM1608D GND 160min. RECOMMENDED REFLOW PROFILE Preheating Soldering A 1.10±0.20 Taping B 1.90±0.20 K 0.90max. 200min. Natural cooling Peak 300min. Drawing direction 250 to 260°C MEM1608D Temperature 230°C 230°C Dimensions in mm PACKAGE QUANTITY 180°C Package quantity 4,000 pcs/reel 10s max. 150°C 60 to 120s 30 to 60s Time TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –40 to +85 °C –40 to +85 °C  The storage temperature range is for after the assembly. Individual weight 3.5 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190207 3tf_commercial_signal_mem1608d_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190207 3tf_commercial_signal_mem1608d_en.fm