MEM2012P101R

(1/2) 3-terminal Filters(SMD) For Wide-band Conformity to RoHS Directive MEM Series MEM2012P Type FEATURES • Multilayer chip EMC filter that is small and low-profile due to the use of a π-type circuit. • Entirely monolithic structure results in high reliability. • Due to closed magnetic circuit architecture, high-density installation becomes possible, and crosstalk generation is prevented. • Steep attenuation characteristic plot. Highly effective noise suppression. • Covers a wide range of frequencies. • π-type circuit with 1 coil /2 capacitors construction. APPLICATIONS Computers, computer peripherals, VCRs, TVs, car audio equipment, printers, game machines, etc. PRODUCT IDENTIFICATION MEM 2012 P 10R0 T (1) (2) (3) (4) (5) (1)Series name (2)Dimensions L× W (3)π-type circuit (4)Cutoff frequency 10R0:10MHz (5)Packaging style T:Taping PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces / reel TEMPERATURE RANGES Operating/Storage –40 to +85°C SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 1 IN/OUT 2 GND 0.5 0.5 1 1.25±0.2 Marking 1 2±0.2 GND 4 3 OUT/IN 0.2 0.7 0.8 0.8 0.8+0.15, –0.2 0.2min 0.2min 0.4±0.15 0.4±0.15 0.4±0.15 0.2 0.7 1.5 1.5 Dimensions in mm Weight: 8mg ELECTRICAL CHARACTERISTICS Part No. MEM2012P10R0 MEM2012P25R0 MEM2012P50R0 MEM2012P75R0 MEM2012P101R Cutoff frequency (MHz) 10 25 50 75 100 Attenuation (dB)min. 20[0.2 to 2GHz] 20[0.3 to 2GHz] 20[0.4 to 2GHz] 20[0.7 to 2GHz] 20[1.5 to 2GHz] Rated voltage Edc(V)max. 12 12 12 12 12 Rated current Idc(mA)max. 200 200 200 200 200 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) • All specifications are subject to change without notice. 002-05 / 20070201 / e9617_mem_p.fm (2/2) MEASURING CIRCUIT 1 Attenuation (dB) 20 MEM2012P101R MEM2012P75R0 MEM2012P50R0 MEM2012P25R0 MEM2012P10R0 30 40 SG C 10 3 L C 50Ω 0 2 4 GND 50Ω TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS V.V. 50 60 70 1 10 100 Frequency (MHz) 1000 10000 RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260˚C Natural cooling 230˚C 180˚C 150˚C Preheating 60 to 120s Soldering 30 to 60s Time(s) • All specifications are subject to change without notice. 002-05 / 20070201 / e9617_mem_p.fm