MHF1608BAC352ATD25

E M C C o m p o n e n t s Noise suppression filter For MF / HF band noise suppression MHF series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 MHF1608 type FEATURES This noise suppression filter is effective for MF/HF noise suppression. The High-loss, High-µ ferrite material of the new development is adopted. Due to ｔhe high-attenuation characteristics at frequencies lower than 100MHz, it is highly effective in suppressing noise in the MF/HF band. Operating temperature range: –55 to +125°C Compliant with AEC-Q200 APPLICATION Car navigation, car audio (AM/FM radio). BMS (Battery monitoring system) Various in-vehicle electronic control units (ECU) PART NUMBER CONSTRUCTION MHF 1608 B AC 352 A T D25 Series name L×W×T dimensions 1.6×0.8x0.8 mm Characteristics Internal code Impedance () at 10MHz Internal code Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance [1MHz] ( )Typ. 80 220 280 380 [10MHz] ( )tolerance 600±25% 1800±25% 2500±25% 3500±25% [100MHz] ( )typ. 1200 1800 1800 1600 DC resistance Rated current Part No. ( )max. 0.600 1.400 1.600 1.800 (mA)max. 350 250 200 170 MHF1608BAC601ATD25 MHF1608BAC182ATD25 MHF1608BAC252ATD25 MHF1608BAC352ATD25 Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20200602 suppression-filter_automotive_mhf1608_en.fm E M C C o m p o n e n t s MHF1608 type Z VS. FREQUENCY CHARACTERISTICS 700 7000 600 6000 MHF1608BAC352ATD25 5000 Impedance (Ω) Impedance (Ω) 500 400 MHF1608BAC352ATD25 300 MHF1608BAC252ATD25 MHF1608BAC182ATD25 200 MHF1608BAC252ATD25 4000 MHF1608BAC182ATD25 3000 2000 MHF1608BAC601ATD25 100 1000 0 0 MHF1608BAC601ATD25 1 10 100 Frequency (KHz) 1000 1 10 100 Frequency (MHz) 1000 INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 0 MHF1608BAC601ATD25 5 2 MHF1608BAC601ATD25 10 Insertion Loss(dB) Insertion Loss(dB) 4 MHF1608BAC182ATD25 6 MHF1608BAC252ATD25 8 MHF1608BAC352ATD25 10 20 25 MHF1608BAC182ATD25 30 12 MHF1608BAC252ATD25 35 14 16 15 40 1 10 100 Frequency (KHz) 1000 MHF1608BAC352ATD25 1 10 100 Frequency (MHz) 1000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20200602 suppression-filter_automotive_mhf1608_en.fm E M C C o m p o n e n t s MHF1608 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 1.6±0.15 0.8±0.15 ø60min. 0.8±0.15 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 0.3±0.2 ø21±0.8 Dimensions in mm 14.4max. ø180±2.0 Dimensions in mm RECOMMENDED LAND PATTERN 0.8 2.0±0.05 4.0±0.1 3.5±0.05 1.5 +0.1 –0 0.6 B Dimensions in mm 8.0±0.3 0.6 Sprocket hole 1.75±0.1 0.8 TAPE DIMENSIONS 4.0±0.1 A K Cavity RECOMMENDED REFLOW PROFILE Preheating Soldering Dimensions in mm Natural cooling Type MHF1608 A 1.1±0.2 160min. Taping B 1.9±0.2 K 1.1max. Peak 250 to 260°C Temperature 230°C 200min. 230°C 300min. Drawing direction 180°C 10s 150°C 60 to 120s 30 to 60s Dimensions in mm PACKAGE QUANTITY Package quantity 4,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –55 to +125 °C –55 to +125 °C  The storage temperature range is for after the assembly. Individual weight 5.2 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20200602 suppression-filter_automotive_mhf1608_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or general electronic equipment including the said product is intended to be used in the usual operation and usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20200602 suppression-filter_automotive_mhf1608_en.fm