(1/4)
SMD Inductors(Coils) For High Frequency(Multilayer)
MLG Series MLG0603S
FEATURES • Nominal inductance values are supported from 0.3 to 100nH. • Provides high Q characteristics. • Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for high-frequency. • The products contain no lead and also support lead-free soldering. • It is a product conforming to RoHS directive. APPLICATIONS For high-frequency applications including mobile phones, high frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB and tuners. SHAPES AND DIMENSIONS
0.6±0.03
Conformity to RoHS Directive
PRODUCT IDENTIFICATION MLG 0603 S 2N2 S T (1) (2) (3) (4) (5) (6) (1) Series name (2) Dimensions
0603 0.6× 0.3mm (L× W)
(3) Material code (4) Inductance value
2N2 12N R10 2.2nH 12nH 100nH
(5) Inductance tolerance
B C S H J ±0.1nH ±0.2nH ±0.3nH ±3% ±5%
0.3±0.03
(6) Packaging style
0.15±0.05
T
Taping (reel)
0.3±0.03
SPECIFICATIONS
Operating temperature range Storage temperature range
Weight: 0.2mg
–55 to +125°C –55 to +125°C [Unit of products]
RECOMMENDED PC BOARD PATTERN
0.25 to 0.35
PACKAGING STYLE AND QUANTITIES
Packaging style Taping Quantity 15000 pieces/reel
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING
10s max. 250 to 260˚C 230˚C Natural cooling
HANDLING AND PRECAUTIONS • Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. • After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. • When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds.
180˚C 150˚C Preheating 60 to 120s Time(s) Soldering 30 to 60s
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice. 006-01 / 20070702 / e521_mlg0603.fm
(2/4)
ELECTRICAL CHARACTERISTICS
Inductance (nH) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 15 18 22 27 33 39 47 56 68 82 100
∗
Inductance tolerance ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5%
Q min. — — — — — — — 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 5 5 5 5
Test frequency L, Q (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Self-resonant frequency (GHz) min. typ. 10.0 20up 10.0 20up 10.0 20up 10.0 20up 10.0 16.3 10.0 16.1 10.0 13.8 10.0 14.4 10.0 13.6 10.0 12.3 9.0 11.4 9.0 10.4 9.0 11.5 8.5 10.0 8.2 9.8 8.0 8.9 8.0 9.2 6.5 8.1 6.2 7.8 5.8 7.0 5.5 6.9 5.0 6.6 5.0 6.4 4.5 5.4 4.5 5.5 4.2 5.3 4.2 5.1 3.6 4.4 4.2 5.3 3.8 4.5 3.4 4.9 3.2 4.1 2.8 3.6 2.5 3.3 2.2 2.8 2.0 2.5 1.8 2.2 1.6 2.0 1.4 1.6 1.3 1.5 1.2 1.4 1.05 1.2 0.90 1.1 0.77 0.9
DC resistance (Ω) max. 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.15 0.15 0.15 0.2 0.2 0.25 0.25 0.25 0.25 0.3 0.35 0.35 0.4 0.4 0.45 0.45 0.5 0.55 0.6 0.7 0.7 0.8 0.8 0.9 1.1 1.2 1.2 1.5 1.8 2.0 2.2 3.2 3.5 4.0 4.5 typ. 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.04 0.04 0.06 0.07 0.07 0.09 0.12 0.14 0.14 0.15 0.17 0.20 0.23 0.22 0.27 0.27 0.28 0.23 0.31 0.32 0.32 0.43 0.45 0.51 0.53 0.63 0.69 0.78 0.88 1.00 1.20 1.40 1.48 2.11 2.40 2.80 3.13
Rated current (mA)max. 600 600 600 600 600 600 600 600 550 550 550 550 500 500 400 400 300 300 300 300 300 300 300 300 250 250 250 250 200 200 200 200 180 180 150 150 100 100 50 50 50 50 50 50
Part No. MLG0603S0N3 MLG0603S0N4 MLG0603S0N5 MLG0603S0N6 MLG0603S0N7 MLG0603S0N8 MLG0603S0N9 MLG0603S1N0 MLG0603S1N1 MLG0603S1N2 MLG0603S1N3 MLG0603S1N5 MLG0603S1N6 MLG0603S1N8 MLG0603S2N0 MLG0603S2N2 MLG0603S2N4 MLG0603S2N7 MLG0603S3N0 MLG0603S3N3 MLG0603S3N6 MLG0603S3N9 MLG0603S4N3 MLG0603S4N7 MLG0603S5N1 MLG0603S5N6 MLG0603S6N2 MLG0603S6N8 MLG0603S7N5 MLG0603S8N2 MLG0603S9N1 MLG0603S10N MLG0603S12N MLG0603S15N MLG0603S18N MLG0603S22N MLG0603S27N MLG0603S33N MLG0603S39N MLG0603S47N MLG0603S56N MLG0603S68N MLG0603S82N MLG0603SR10
∗T
T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T
: Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%). • Test equipment Inductance Q : HP4291A+16197A, or equivalent SRF: HP8720C, or equivalent Rdc: YOKOGAWA TYPE7561, or equivalent • Rated current : Value obtained when current flows and temperature has risen to under 20°C.
• All specifications are subject to change without notice. 006-01 / 20070702 / e521_mlg0603.fm
(3/4)
L, Q vs. FREQUENCY CHARACTERISTICS
Q typ. 1.8GHz 2.0GHz 2.4GHz 500MHz 0.3 0.3 0.3 14.5 MLG0603S0N3 ∗ T MLG0603S0N4 T 0.4 0.4 0.4 14.0 MLG0603S0N5 T 0.45 0.45 0.45 14.1 0.5 0.5 0.5 15.6 MLG0603S0N6 T MLG0603S0N7 T 0.6 0.6 0.6 16.3 0.7 0.7 0.7 15.4 MLG0603S0N8 T MLG0603S0N9 T 0.8 0.8 0.8 15.1 MLG0603S1N0 T 0.9 0.9 0.9 14.3 1.0 1.0 1.0 14.4 MLG0603S1N1 T MLG0603S1N2 T 1.1 1.1 1.1 14.2 1.2 1.2 1.2 14.3 MLG0603S1N3 T MLG0603S1N5 T 1.4 1.4 1.4 14.8 MLG0603S1N6 T 1.5 1.5 1.5 14.3 1.7 1.7 1.7 14.7 MLG0603S1N8 T MLG0603S2N0 T 1.9 1.9 1.9 13.9 2.1 2.1 2.1 13.8 MLG0603S2N2 T 2.2 2.3 2.3 13.9 MLG0603S2N4 T MLG0603S2N7 T 2.6 2.6 2.7 14.6 2.9 2.9 3.0 15.1 MLG0603S3N0 T MLG0603S3N3 T 3.2 3.3 3.4 15.1 3.5 3.6 3.7 13.8 MLG0603S3N6 T MLG0603S3N9 T 3.8 3.9 4.1 15.1 MLG0603S4N3 T 4.3 4.4 4.6 14.3 MLG0603S4N7 T 4.8 4.9 5.2 15.2 MLG0603S5N1 T 5.1 5.3 5.6 13.8 MLG0603S5N6 T 5.7 5.9 6.4 15.5 MLG0603S6N2 T 6.5 6.8 7.5 14.5 MLG0603S6N8 T 7.4 7.8 8.7 15.4 MLG0603S7N5 T 7.8 8.0 8.7 14.2 MLG0603S8N2 T 8.8 9.3 10.4 14.7 MLG0603S9N1 T 9.8 10.3 11.5 13.5 MLG0603S10N T 11.5 12.3 14.5 14.9 MLG0603S12N T 14.2 15.4 18.7 15.6 MLG0603S15N T 20.1 23.0 32.6 15.2 MLG0603S18N T 28.3 35.3 72.3 14.2 MLG0603S22N T 40.4 55.8 231.8 14.8 MLG0603S27N T 68.3 130.9 14.6 MLG0603S33N T 144.5 14.2 MLG0603S39N T 13.1 MLG0603S47N T 12.8 MLG0603S56N T 12.0 12.5 MLG0603S68N T MLG0603S82N T 11.8 MLG0603SR10 T 10.5 ∗ : Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%). Part No. Inductance(nH)typ. 500MHz 800MHz 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.9 1.9 2.1 2.0 2.2 2.2 2.5 2.5 2.8 2.8 3.1 3.1 3.4 3.4 3.7 3.7 4.1 4.1 4.4 4.4 4.8 4.8 5.3 5.3 5.9 5.9 6.4 6.5 7.1 7.1 7.8 7.8 8.6 8.6 9.5 9.6 11.4 11.7 14.4 14.8 17.3 18.0 21.3 22.5 26.5 28.6 32.6 36.0 39.5 46.5 48.6 59.5 59.2 77.2 74.4 103.9 95.5 161.3 129.3 353.5 800MHz 19.9 18.9 18.4 19.8 21.4 20.4 19.3 18.3 18.7 18.3 18.3 18.8 18.4 18.9 18.0 17.7 17.9 18.6 19.4 19.2 17.8 19.4 18.3 19.5 17.5 19.6 18.3 19.4 18.0 18.2 16.9 18.4 19.3 18.5 17.0 17.3 16.7 15.9 13.7 12.5 10.9 10.7 8.2 4.4 1.8GHz 34.1 30.1 29.3 32.8 33.1 32.1 30.1 28.8 29.1 28.6 28.6 29.0 28.6 28.7 27.7 26.8 27.4 27.8 29.4 28.2 26.2 28.5 26.5 27.9 25.0 27.2 25.1 25.7 25.2 23.9 22.2 22.8 23.5 19.9 15.4 13.4 9.3 5.2 2.0GHz 34.8 32.1 31.7 34.2 34.7 34.1 31.8 30.3 30.5 30.3 30.0 30.4 30.1 30.1 29.2 27.9 28.5 28.8 30.6 29.2 27.0 29.4 27.3 28.6 25.5 27.8 25.4 25.7 25.6 24.0 22.3 22.4 22.7 18.3 12.9 10.1 4.9 0.5 2.4GHz 40.4 35.9 35.4 38.6 38.6 37.8 35.3 33.8 34.1 33.5 33.2 33.5 33.4 33.1 32.2 30.7 31.5 31.4 33.4 31.4 29.0 31.6 28.9 30.1 26.7 28.8 25.7 25.3 26.4 23.6 21.8 20.8 20.4 13.9 6.7 2.1
• All specifications are subject to change without notice. 006-01 / 20070702 / e521_mlg0603.fm
(4/4)
TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS
1000
Q vs. FREQUENCY CHARACTERISTICS
50
100
100nH 33nH
40 1.0nH 3.3nH 30 Q 20 10nH 10 100nH 33nH 100 1000 Frequency(MHz) 10000 100 Frequency(MHz) 1000 10000 0 10 2.0± 0.5 ø13± 0.5 ø21± 0.8 9.0± 0.3 13.0± 1.4 ø60± 2.0 Dimensions in mm 1.5 +0.1 –0.0 Cavity 1.75±0.1 300min. Dimensions in mm 0.68±0.05 4.0± 0.1 2.0± 0.05 2.0± 0.05 Taping 200min. 8.0±0.3 3.5±0.05
Inductance (nH)
10
10nH 3.3nH
1
1.0nH
0 10
PACKAGING STYLES REEL DIMENSIONS
1.0
ø178± 2.0
TAPE DIMENSIONS
Sprocket hole
0.5max.
0.38± 0.05
160min.
Drawing direction
• All specifications are subject to change without notice. 006-01 / 20070702 / e521_mlg0603.fm
