I N D U C T O R S
Inductors for decoupling circuits
Multilayer ferrite
MLJ-G series (for automotive PoC)
RoHS
REACH
SVHC-Free
Cl
Br
Pb
Halogen
Free
Lead
Free
AEC-Q200
MLJ1608-G type
FEATURES
The small multilayer inductor ideal for PoC (Power Over Coax) circuits.
A wide band and high impedance characteristics are realized by the original circuit structure.
It is suitable for high current applications due to its good DC superimposition characteristics due to the low loss ferrite material.
Operating temperature range: –55 to +125°C
APPLICATION
PoC for in-vehicle use (camera, DMS, etc.)
PART NUMBER CONSTRUCTION
MLJ
1608
WG
C
R56
N
T
D25
Series name
L×W×H dimensions
1.6×0.8×0.8 mm
Characteristics
Internal code
Inductance
(µH)
Inductance
tolerance
Packaging
style
Internal code
CHARACTERISTICS SPECIFICATION TABLE
L
L measuring conditions
(µH)
0.56
Tolerance
±30%
Frequency
Current
(MHz)
25
(mA)
1
DC resistance
( )typ.
0.45
Rated current
( )max.
0.7
Part No.
105°C
125°C
(mA)max.
500
(mA)max.
400
MLJ1608WGCR56NTD25
Measurement equipment
Measurement item
Product No.
L
4294A+16034G
Type-755611
直流抵抗
* Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20220601
inductor_automotive_decoupling_mlj1608-g_en.fm
I N D U C T O R S
MLJ1608-G type
L FREQUENCY CHARACTERISTICS
1
WGCR56
Inductance(μH)
0.1
0.01
0.001
1
10
100
Frequency(MHz)
1000
Measurement equipment
Product No.
Manufacturer
4991A+16192A
Keysight Technologies
* Equivalent measurement equipment may be used.
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
3000
2500
WGCR56
Impedance(Ω)
2000
1500
1000
500
0
1
10
100
Frequency(MHz)
1000
Measurement equipment
Product No.
Manufacturer
4991A+16192A
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20220601
inductor_automotive_decoupling_mlj1608-g_en.fm
I N D U C T O R S
MLJ1608-G type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
1.6±0.15
E
0.8±0.15
ø60min.
0.8±0.15
2.0±0.5
1.0
0.3±0.2
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
Dimensions in mm
14.4max.
ø180±2.0
Dimensions in mm
1.5 +0.1
–0
2.0±0.05
4.0±0.1
B
8.0±0.3
0.8
Sprocket
hole
0.6
0.8
3.5±0.05
RECOMMENDED LAND PATTERN
1.75±0.1
TAPE DIMENSIONS
0.6
4.0±0.1
A
K
Cavity
Dimensions in mm
Dimensions in mm
Type
MLJ1608-G
160min.
A
1.1±0.2
Taping
B
1.9±0.2
K
1.1 max.
200min.
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
300min.
Drawing direction
Peak
Dimensions in mm
250 to 260°C
PACKAGE QUANTITY
Temperature
230°C
230°C
10s max.
60 to 120s
4000 pcs/reel
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
180°C
150°C
Package quantity
30 to 60s
Operating
Storage
temperature range
temperature range
–55 to +125 °C
–55 to +125 °C
The storage temperature range is for after the assembly.
Individual
weight
4 mg
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20220601
inductor_automotive_decoupling_mlj1608-g_en.fm
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not
exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall
distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment,
telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment,
measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in
a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications as general electronic
equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or
general electronic equipment including the said product is intended to be used in the usual operation and usage methods, respectively. Other
than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose
performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious
damage to society, person or property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for
any other use exceeding the range or conditions set forth in this specification sheet.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth
in this specification, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(2) Transportation equipment (electric trains, ships, etc.)
(9) Military equipment
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(4) Power-generation control equipment
(11) Disaster prevention/crime prevention equipment
(5) Atomic energy-related equipment
(12) Safety equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
(7) Transportation control equipment
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20220601
inductor_automotive_decoupling_mlj1608-g_en.fm
很抱歉,暂时无法提供与“MLJ1608WGCR56NTD25”相匹配的价格&库存,您可以联系我们找货
免费人工找货