MLJ1608WR56JT000

I N D U C T O R S NFC circuit/inductors for standard circuits Multilayer ferrite MLJ series REACH SVHC-Free RoHS Cl Br Pb Halogen Free Lead Free MLJ1608 type FEATURES Response to large currents with newly-developed ferrite materials. Narrow tolerance response with high-accuracy multiple layers. Significant reductions of high-frequency loss due to the adoption of low-loss materials. Operating temperature range: –55 to +125°C APPLICATION NFC circuits for devices such as smartphones and PCs, and power lines for electronic devices. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MLJ 1608 W R16 △ T 000 Series name L×W×H dimensions 1.6×0.8×0.8 mm Characteristics Inductance (nH) Inductance tolerance Packaging style Internal code  The " △ " of the Part Number contains the inductance tolerance code, J (±5%), K (±10%), or M (±20%). CHARACTERISTICS SPECIFICATION TABLE L Q L, Q measuring conditions Frequency (nH) 100 120 150 160 180 220 270 330 390 470 560 Tolerance ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% Self-resonant frequency DC resistance Current Rated current Part No. min. (MHz) (mA) (MHz)min. (MHz)typ. (Ω )max. Isat Isat (mA)max. (mA)typ. Itemp (mA)max. 15 25 1.0 450 600 0.13 700 900 800 15 25 1.0 400 520 0.15 650 800 750 15 25 1.0 350 470 0.16 600 750 700 15 25 1.0 330 450 0.16 600 750 700 15 25 1.0 320 440 0.20 600 700 650 15 25 1.0 290 400 0.26 550 700 600 15 25 1.0 260 350 0.29 550 650 550 15 25 1.0 230 320 0.32 500 650 500 15 25 1.0 210 290 0.37 450 600 450 15 25 1.0 190 260 0.50 400 600 400 15 25 1.0 170 230 0.52 400 550 400 MLJ1608WR10JT000 MLJ1608WR10KT000 MLJ1608WR12JT000 MLJ1608WR12KT000 MLJ1608WR15JT000 MLJ1608WR15KT000 MLJ1608WR16JT000 MLJ1608WR16KT000 MLJ1608WR18JT000 MLJ1608WR18KT000 MLJ1608WR22JT000 MLJ1608WR22KT000 MLJ1608WR27JT000 MLJ1608WR27KT000 MLJ1608WR33JT000 MLJ1608WR33KT000 MLJ1608WR39JT000 MLJ1608WR39KT000 MLJ1608WR47JT000 MLJ1608WR47KT000 MLJ1608WR56JT000 MLJ1608WR56KT000 Measurement equipment Measurement item Product No. L, Q 4294A+16034G Self-resonant frequency E4991A DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190111 inductor_commercial_standard_mlj1608_en.fm I N D U C T O R S MLJ1608 type L FREQUENCY CHARACTERISTICS 10000 Inductance (nH) WR56 WR47 1000 WR39 WR33 WR27 WR22 WR18 WR15 100 WR16 WR12 WR10 10 1 10 100 1000 Frequency(MHz) Measurement equipment Product No. Manufacturer 4294A+16034G Keysight Technologies ＊ Equivalent measurement equipment may be used. Q FREQUENCY CHARACTERISTICS 60 WR12 WR15 50 WR18 WR16 Q 40 30 20 10 WR39 0 WR33 WR27 WR22 WR47 WR56 WR10 1 10 100 Frequency(MHz) 1000 10000 Measurement equipment Product No. Manufacturer 4294A+16034G Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190111 inductor_commercial_standard_mlj1608_en.fm I N D U C T O R S MLJ1608 type SHAPE & DIMENSIONS PACKAGING STYLE 0.80±0.15 REEL DIMENSIONS 0.30±0.20 2.0±0.5 0.30±0.20 0.80±0.15 ø60min. 1.60±0.15 1.0 8.4 +2.0 –0.0 ø13±0.2 Dimensions in mm ø21±0.8 14.4max. ø180±2.0 Dimensions in mm 1.5 +0.1 –0 2.0±0.05 4.0±0.1 B 8.0±0.3 0.8 Sprocket hole 0.6 0.8 3.5±0.05 RECOMMENDED LAND PATTERN 1.75±0.1 TAPE DIMENSIONS 0.6 4.0±0.1 A K Dimensions in mm Cavity Dimensions in mm Type MLJ1608 A 1.1±0.2 160min. Taping B 1.9±0.2 K 1.1 max. 200min. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling 300min. Drawing direction Peak Dimensions in mm 250 to 260°C Temperature 230°C 230°C PACKAGE QUANTITY Package quantity 180°C TEMPERATURE RANGE, INDIVIDUAL WEIGHT 10s max. 150°C 60 to 120s 4000 pcs/reel 30 to 60s Operating Storage temperature range temperature range –55 to +125 °C –55 to +125 °C  The storage temperature range is for after the assembly. Individual weight 4 mg Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190111 inductor_commercial_standard_mlj1608_en.fm I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190111 inductor_commercial_standard_mlj1608_en.fm