MLZ1005MR68WT000

I N D U C T O R S May 2017 Inductors for Decoupling Circuits Multilayer Ferrite MLZ Series MLZ1005 Type MLZ1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (3/10) I N D U C T O R S Product compatible with RoHS directive Halogen-free Compatible with lead-free solders Inductors for Decoupling Circuits Multilayer Ferrite Overview of MLZ1005 Type FEATURES The MLZ Series include inductors for decoupling circuits that have top-class DC superimposition characteristics and low DC resistance. They are compatible with wide frequency band noise, from low to high frequency. W type products are the new standard type products that have both large current and low resistance. APPLICATION Smart phones, tablet terminals, note PCs, various modules such as camera modules, DSCs, video games, portable memory audio devices, navigation systems, PNDs, WLANs, SSDs PART NUMBER CONSTRUCTION MLZ Series name 1005 M R47 L×W×H Dimensions (mm) 1005 1.0×0.5×0.5 Product internal code M Inductance (µH) R47 0.47 1R0 1 W T 000 Characteristic type Packaging style Internal code W Large current type T Taping 000 OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Operating Storage Type temperature temperature (pieces/reel) （°C） （°C） MLZ1005 –55 to +125 –55 to +125 10000 Operating temperature range includes self-temperature rise. The Storage temperature range is for after the circuit board is mounted. Individual weight （mg） 1.2 RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (4/10) I N D U C T O R S MLZ1005 Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 30 to 60s Peak Temp. T4 250 to 260°C Time t3 10s max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (5/10) I N D U C T O R S MLZ1005 Type 0.50±0.05 SHAPE & DIMENSIONS 0.10min. 0.10min. 0.50±0.05 1.00±0.05 Dimensions in mm 0.5 RECOMMENDED LAND PATTERN 0.5 0.4 0.5 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (6/10) I N D U C T O R S MLZ1005 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Type Large current 1 2 L (µH) 0.47 0.68 1.00 1.50 2.20 L measuring conditions Tolerance ±20% ±20% ±20% ±20% ±20% Frequency Current (MHz) 2 2 2 2 2 (mA) 0.1 0.1 0.1 0.1 0.1 DC resistance Isat1 Itemp2 Part No. ( )±30% 0.20 0.30 0.35 0.50 0.55 (mA) 120 110 100 80 60 (mA) 500 450 450 350 350 MLZ1005MR47WT000 MLZ1005MR68WT000 MLZ1005M1R0WT000 MLZ1005M1R5WT000 MLZ1005M2R2WT000 Current assumed when inductance ratio has decreased by 50% max.. Current assumed when temperature has risen to 20°C max. (reference value). Operating temperature environment at this time: 105°C max. ○ Measurement equipment Measurement item Product No. L 4294A+16034G DC resistance Type-7561 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (7/10) I N D U C T O R S MLZ1005 Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 10 2R2W 1R5W 1R0W R68W R47W Inductance(μH) 1 0.1 0.01 1 10 100 1000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer Keysight Technologies E4991A+16192Ａ ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (8/10) I N D U C T O R S MLZ1005 Type ELECTRICAL CHARACTERISTICS INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH 3.0 2R2W Inductance(μH) 2.0 1R5W 1R0W 1.0 R68W R47W 0.0 0 50 100 150 DC current(mA) ○ Measurement equipment Product No. Manufacturer 4291B+16200A+16192A Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (9/10) I N D U C T O R S MLZ1005 Type ELECTRICAL CHARACTERISTICS IMPEDANCE FREQUENCY CHARACTERISTICS GRAPH 10000 2R2W 1R0W Impedance(Ω) 1000 1R5W R47W R68W 100 10 1 1 10 100 1000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A+16192A Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm (10/10) I N D U C T O R S MLZ1005 Type PACKAGING STYLE REEL DIMENSIONS ø60min. 1.0 2.0±0.5 8.4 +2.0 –0.0 ø13±0.2 14.4max. ø21±0.8 ø180±2.0 Dimensions in mm 4.0±0.1 B 8.0±0.3 2.0±0.05 F 1.5 +0.1 0 1.75±0.1 TAPE DIMENSIONS 4.0±0.1 A K Dimensions in mm Type MLZ1005 160min. Drawing direction A 0.65±0.1 Taping B 1.15±0.1 K 0.8 max. 200min. 300min. Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20170510 / inductor_commercial_decoupling_mlz1005_en.fm