E M C
C o m p o n e n t s
May 2018
Chip beads
For general signal line
MMZ series
MMZ0603 type
MMZ0603
0603[0201 inch]*
* Dimensions Code JIS[EIA]
(2/11)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20180521 / beads_commercial_signal_mmz0603_en.fm
(3/11)
E M C
C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Chip beads
For general signal line
Overview of MMZ0603 type
FEATURES
Noise reduction solution for general signal line.
Various frequency characteristics with 4 materials of different features for countermeasures against everything from general signals to
high-speed signals.
APPLICATION
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
MMZ
Series name
0603
L×W×T dimensions
(mm)
0603
0.6×0.3x0.3
S
Material name
D
F
S
Y
100
C
Impedance
() at 100MHz
100
10
121
120
Characteristic
type
C
T
000
Packaging style
Internal code
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Operating
Storage
Type
temperature
temperature
(°C)
(°C)
MMZ0603
–55 to +125
–55 to +125
The Storage temperature range is for after the circuit board is mounted.
Package quantity
Individual weight
(pieces/reel)
15,000
(mg)
0.3
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(4/11)
E M C
C o m p o n e n t s
MMZ0603 type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(5/11)
E M C
C o m p o n e n t s
MMZ0603 type
MATERIAL CHARACTERISTICS
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak
frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in
the GHz range.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
2000
1800
D
1600
Y
1400
1200
1000
S
800
F
600
400
200
0
10
100
Frequency(MHz)
1000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(6/11)
E M C
C o m p o n e n t s
MMZ0603 type
SHAPE & DIMENSIONS
0.3±0.03
0.3±0.03
0.6±0.03
0.1min.
Dimensions in mm
0.30
RECOMMENDED LAND PATTERN
0.25
0.30
0.25
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(7/11)
E M C
C o m p o n e n t s
MMZ0603 type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
[100MHz]
( )
10
80
120
240
470
600
75
120
240
470
600
33
47
56
80
120
10
22
33
Tolerance
±5
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±5
±25%
±25%
DC resistance
Rated current
Part No.
( )max.
0.05
0.30
0.45
0.57
1.30
1.45
0.35
0.39
0.80
1.40
1.50
0.70
0.70
0.95
1.25
1.40
0.50
1.00
1.30
(mA)max.
1000
200
200
200
100
100
300
200
200
200
200
200
200
100
100
100
200
200
150
MMZ0603S100CT000
MMZ0603S800CT000
MMZ0603S121CT000
MMZ0603S241CT000
MMZ0603S471CT000
MMZ0603S601CT000
MMZ0603Y750CT000
MMZ0603Y121CT000
MMZ0603Y241CT000
MMZ0603Y471CT000
MMZ0603Y601CT000
MMZ0603D330CT000
MMZ0603D470CT000
MMZ0603D560CT000
MMZ0603D800CT000
MMZ0603D121CT000
MMZ0603F100CT000
MMZ0603F220CT000
MMZ0603F330CT000
○ Measurement equipment
Measurement item
Product No.
Impedance
E4991A+16197
DC resistance
Type-7556
* Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(8/11)
E M C
C o m p o n e n t s
MMZ0603 type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ0603S-C series
MMZ0603Y series
1000
1000
1000
MMZ0603S601C
MMZ0603S471C
800
Impedance (Ω)
500 MMZ0603S800C
MMZ0603S100C
400
800
MMZ0603Y471C
700
MMZ0603S121C
600
MMZ0603D121C
900
800
MMZ0603S241C
700
MMZ0603Y601C
900
600
MMZ0603Y241C
500
MMZ0603Y121C
400
MMZ0603D800C
700
Impedance (Ω)
900
Impedance (Ω)
MMZ0603D series
600
MMZ0603D560C
500
MMZ0603D470C
400
300
300
300
200
200
200
100
100
0
0
MMZ0603D330C
100
MMZ0603Y750C
1
10
100
1000
Frequency (MHz)
10000
1
10
100
1000
Frequency (MHz)
10000
0
1
10
100
1000
Frequency (MHz)
10000
MMZ0603F series
1200
Impedance (Ω)
1000
800
MMZ0603F330C
600
MMZ0603F220C
400
MMZ0603F100C
200
0
1
10
100
1000
Frequency (MHz)
10000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(9/11)
E M C
C o m p o n e n t s
MMZ0603 type
ELECTRICAL CHARACTERISTICS
R
X
1
10
100
1000
Frequency (MHz)
10000
Z
R
X
1
10
100
1000
Frequency (MHz)
150
Z
100
R
50
X
1
10
100
1000
Frequency (MHz)
Z
R
400
200
X
1
10
X
1
10
100
1000
Frequency (MHz)
MMZ0603D470CT000
Impedance (Ω)
400
300
Z
200
100
R
X
1
10
100
1000
Frequency (MHz)
10000
10000
Z
600
R
400
200
1
10
100
1000
Frequency (MHz)
10000
MMZ0603Y241CT000
600
Z
150
R
100
50
500
400
1
10
100
1000
Frequency (MHz)
Z
300
R
200
100
X
0
10000
1
10
X
100
1000
Frequency (MHz)
10000
MMZ0603D330CT000
500
800
Z
600
R
400
200
X
1
10
100
1000
Frequency (MHz)
700
600
500
400
300
200
100
0
R
X
10
300
Z
200
R
100
0
X
1
10
100
1000
Frequency (MHz)
10000
MMZ0603D800CT000
Z
1
400
10000
MMZ0603D560CT000
500
100
1000
Frequency (MHz)
800
0
10000
200
0
10000
10
X
100
1000
Frequency (MHz)
Impedance (Ω)
R
1
MMZ0603S601CT000
1000
Z
50
X
MMZ0603Y601CT000
Impedance (Ω)
900
800
700
600
500
400
300
200
100
0
R
100
1000
600
0
10000
Z
150
0
10000
Impedance (Ω)
Impedance (Ω)
Impedance (Ω)
Impedance (Ω)
100
1000
Frequency (MHz)
250
MMZ0603Y471CT000
Impedance (Ω)
10
MMZ0603Y121CT000
200
0
1
0
10000
200
X
800
MMZ0603Y750CT000
0
R
Impedance (Ω)
450
400
350
300
250
200
150
100
50
0
Z
MMZ0603S471CT000
Impedance (Ω)
Impedance (Ω)
MMZ0603S241CT000
250
Impedance (Ω)
Z
160
140
120
100
80
60
40
20
0
MMZ0603S121CT000
Impedance (Ω)
18
16
14
12
10
8
6
4
2
0
Impedance (Ω)
Impedance (Ω)
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ0603S100CT000
MMZ0603S800CT000
100
1000
Frequency (MHz)
10000
900
800
700
600
500
400
300
200
100
0
Z
1
10
X
100
1000
Frequency (MHz)
R
10000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(10/11)
E M C
C o m p o n e n t s
MMZ0603 type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ0603D121CT000
MMZ0603F100CT000
600
Z
400
200
0
X
1
10
R
100
1000
Frequency (MHz)
10000
200
Impedance (Ω)
250
Impedance (Ω)
300
800
Impedance (Ω)
1000
MMZ0603F220CT000
Z
150
100
50
0
R
1
10
100
1000
Frequency (MHz)
X
10000
700
600
500
400
300
200
100
0
Z
R
1
X
10
100
1000
Frequency (MHz)
10000
MMZ0603F330CT000
1200
Impedance (Ω)
1000
800
600
400
Z
200
0
1
10
X
100
1000
Frequency (MHz)
R
10000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
(11/11)
E M C
C o m p o n e n t s
MMZ0603 type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
2.0±0.5
1.0
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
14.4max.
ø180±2.0
Dimensions in mm
4.0±0.1
B
A
8.0±0.3
2.0±0.05
3.5±0.05
1.5 +0.1
0
1.75±0.1
TAPE DIMENSIONS
P1
K
Dimensions in mm
Type
MMZ0603
160min.
Drawing direction
A
0.38±0.05
Taping
B
0.68±0.05
P1
2.0±0.05
K
0.5max.
200min.
300min.
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_commercial_signal_mmz0603_en.fm
很抱歉,暂时无法提供与“MMZ0603S100CT000”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 50+0.04844
- 500+0.04360
- 5000+0.04037
- 10000+0.03875
- 30000+0.03714
- 50000+0.03617