MMZ1608SHE102ATD25

E M C C o m p o n e n t s Chip beads For general signal line RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MMZ-HE series (for automotive) AEC-Q200 MMZ1608-HE type FEATURES Noise reduction solution for general signal line. The new terminal electrode design improves the bonding strength with solder and supports an environment of 150°C. High durability solder can be used. Operating temperature range: –55 to +150°C APPLICATION Various ECUs, powertrains and Electric brake booster PART NUMBER CONSTRUCTION MMZ 1608 S HE 102 A T D25 Series name L×W×T dimensions 1.6×0.8×0.8 mm Material name Specifications (Grade) Impedance () at 100MHz Characteristic type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance DC resistance Rated current Part No. [100MHz] 125°C 150°C ( ) Tolerance ( )max. (mA)max. (mA)max. 120 ±25% 0.15 500 300 MMZ1608SHE121ATD25 470 ±25% 0.3 500 250 MMZ1608SHE471ATD25 600 ±25% 0.35 500 200 MMZ1608SHE601ATD25 1000 ±25% 0.5 400 200 MMZ1608SHE102ATD25  Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 125°C or more in temperature of the product. Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Rated current vs. temperature characteristics (derating) 600 Rated current (mA) 500 400 300 200 100 0 –55 –25 SHE121 0 25 50 75 Temperature (°C) SHE471 100 SHE601 125 150 SHE102 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20210423 beads_automotive_signal_mmz1608-he_en.fm E M C C o m p o n e n t s MMZ1608-HE type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MMZ1608SHE series 1200 MMZ1608SHE102A 1000 Impedance (Ω) MMZ1608SHE601A 800 600 400 MMZ1608SHE471A 200 0 MMZ1608SHE121A 1 10 100 1000 Frequency (MHz) 10000 Z, X, R VS. FREQUENCY CHARACTERISTICS MMZ1608SHE121ATD25 MMZ1608SHE471ATD25 600 150 Z 100 R 50 800 Impedance (Ω) Impedance (Ω) Impedance (Ω) 200 MMZ1608SHE601ATD25 Z 400 R 200 X 600 Z 400 R 200 X X 0 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 MMZ1608SHE102ATD25 1200 Impedance (Ω) 1000 Z 800 R 600 400 X 200 0 1 10 100 1000 Frequency (MHz) 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20210423 beads_automotive_signal_mmz1608-he_en.fm E M C C o m p o n e n t s MMZ1608-HE type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 1.6±0.15 0.8±0.15 ø60min. 0.8±0.15 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 0.3±0.2 ø21±0.8 Dimensions in mm 14.4max. ø180±2.0 Dimensions in mm 2.0±0.05 4.0±0.1 0.6 8.0±0.3 0.8 B 0.6 3.5±0.05 1.5 +0.1 –0 0.8 Sprocket hole 1.75±0.1 TAPE DIMENSIONS RECOMMENDED LAND PATTERN Dimensions in mm 4.0±0.1 A K Cavity Dimensions in mm Type MMZ1608-HE A 1.1±0.2 B 1.9±0.2 K 1.1max. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling 160min. Taping 200min. Peak 250 to 260°C 300min. Drawing direction Temperature 230°C 230°C Dimensions in mm PACKAGE QUANTITY 180°C 10s 150°C 60 to 120s 30 to 60s Time Package quantity 4,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating temperature Storage temperature range range –55 to +150 °C –55 to +150 °C  The storage temperature range is for after the assembly. Individual weight 4 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20210423 beads_automotive_signal_mmz1608-he_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or general electronic equipment including the said product is intended to be used in the usual operation and usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20210423 beads_automotive_signal_mmz1608-he_en.fm