MPZ0603S330CT000

E M C C o m p o n e n t s Chip beads For power line MPZ series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MPZ0603 type FEATURES Noise reduction solution for power line. Compared to the MMZ series, has low direct current resistance for compatibility with large currents, optimal for low power consumption. Performs well even in signal lines where low direct current resistance is required. Operating temperature range: –55 to +125°C APPLICATION Noise removal for mobile devices such as smartphones and tablet terminals, and various modules. Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment. PART NUMBER CONSTRUCTION MPZ 0603 S 220 C T 000 Series name L×W×T dimensions 0.6×0.3x0.3 mm Material name Impedance () at 100MHz Characteristic type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance [100MHz] ( ) 22 33 47 Tolerance ±25% ±25% ±25% DC resistance Rated current Part No. ( )max. 0.065 0.090 0.120 (A)max. 1.0 0.75 0.50 MPZ0603S220CT000 MPZ0603S330CT000 MPZ0603S470CT000 Measurement equipment Measurement item Product No. Impedance E4991A+16197 DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190424 beads_commercial_power_mpz0603_en.fm E M C C o m p o n e n t s MPZ0603 type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MPZ0603S series 100 90 MPZ0603S470C 80 Impedance (Ω) 70 60 MPZ0603S330C 50 40 30 20 MPZ0603S220C 10 0 1 10 100 1000 Frequency (MHz) 10000 Z, X, R VS. FREQUENCY CHARACTERISTICS Z R X 1 10 100 1000 Frequency (MHz) 10000 70 60 50 40 30 20 10 0 MPZ0603S470CT000 100 Impedance (Ω) 45 40 35 30 25 20 15 10 5 0 MPZ0603S330CT000 Impedance (Ω) Impedance (Ω) MPZ0603S220CT000 Z R X 1 10 100 1000 Frequency (MHz) 10000 80 Z 60 R 40 20 0 X 1 10 100 1000 Frequency (MHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 10000 (2/4) 20190424 beads_commercial_power_mpz0603_en.fm E M C C o m p o n e n t s MPZ0603 type PACKAGING STYLE SHAPE & DIMENSIONS REEL DIMENSIONS 0.6±0.03 0.3±0.03 ø60min. 0.3±0.03 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 0.1min. ø21±0.8 Dimensions in mm 14.4max. ø180±2.0 Dimensions in mm 2.0±0.05 4.0±0.1 0.30 B 0.25 8.0±0.3 0.30 1.5 +0.1 –0 3.5±0.05 Sprocket hole 1.75±0.1 TAPE DIMENSIONS RECOMMENDED LAND PATTERN 0.25 Dimensions in mm K A Cavity 2.0±0.05 Type MPZ0603 RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Dimensions in mm A 0.38±0.05 160min. Taping B 0.68±0.05 K 0.5max. 200min. Peak 250 to 260°C Temperature 230°C 230°C 300min. Drawing direction Dimensions in mm PACKAGE QUANTITY 180°C 10s 150°C 60 to 120s 30 to 60s Time Package quantity 15,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –55 to +125°C –55 to +125°C  The storage temperature range is for after the assembly. Individual weight 0.3 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190424 beads_commercial_power_mpz0603_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190424 beads_commercial_power_mpz0603_en.fm