MPZ1005Y900CTD25

E M C C o m p o n e n t s Chip beads For power line MPZ series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 MPZ1005 type FEATURES Noise reduction solution for power line. Compared to the MMZ series, has low direct current resistance for compatibility with large currents, optimal for low power consumption. Various frequency characteristics with 2 materials of different features for countermeasures against everything from general signals to high-speed signals. Performs well even in signal lines where low direct current resistance is required. Operating temperature range: –55 to +125°C APPLICATION Various ECUs, powertrains, body controls, and car multimedia (telematics). PART NUMBER CONSTRUCTION MPZ 1005 S 100 C T D25 Series name L×W×T dimensions 1.0×0.5x0.5 mm Material name Impedance () at 100MHz Characteristic type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance Rated current DC resistance Part No. [100MHz] ( ) Tolerance ( )max. (A)max. 10 ±5 0.025 3.0 MPZ1005S100CTD25 30 ±10 0.035 1.7 MPZ1005S300CTD25 60 ±25% 0.060 1.5 MPZ1005S600CTD25 120 ±25% 0.090 1.2 MPZ1005S121CTD25 90 ±25% 0.100 1.2 MPZ1005Y900CTD25  Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Rated current vs. temperature characteristics (derating) 3.5 Rated current (A) 3 S100C 2.5 2 1.5 1 S300C S600C S121C,Y900C 0.5 0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190423 beads_automotive_power_mpz1005_en.fm E M C C o m p o n e n t s MPZ1005 type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MPZ1005S series MPZ1005Y series 250 250 MPZ1005Y900C 200 200 MPZ1005S121C Impedance (Ω) Impedance (Ω) MPZ1005S600C MPZ1005S300C 150 MPZ1005S100C 100 100 50 50 0 150 1 10 100 1000 Frequency (MHz) 0 10000 1 10 100 1000 Frequency (MHz) 10000 Z, X, R VS. FREQUENCY CHARACTERISTICS 50 Z R X 1 10 100 1000 Frequency (MHz) Z 30 R 20 10 X 1 10 100 1000 Frequency (MHz) 80 Z 60 R 40 20 X 10000 0 1 10 100 1000 Frequency (MHz) 10000 MPZ1005Y900CTD25 250 200 Impedance (Ω) Z 150 R 100 50 X 0 100 40 0 10000 MPZ1005S121CTD25 Impedance (Ω) MPZ1005S600CTD25 Impedance (Ω) 18 16 14 12 10 8 6 4 2 0 MPZ1005S300CTD25 Impedance (Ω) Impedance (Ω) MPZ1005S100CTD25 1 10 100 1000 Frequency (MHz) 10000 200 Z 150 R 100 50 0 X 1 10 100 1000 Frequency (MHz) 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20190423 beads_automotive_power_mpz1005_en.fm E M C C o m p o n e n t s MPZ1005 type PACKAGING STYLE SHAPE & DIMENSIONS REEL DIMENSIONS 1±0.05 0.5±0.05 ø60min. 0.5±0.05 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 0.1min. ø21±0.8 Dimensions in mm 14.4max. ø180±2.0 Dimensions in mm 2.0±0.05 4.0±0.1 8.0±0.3 0.4 B 0.5 3.5±0.05 1.5 +0.1 –0 0.5 Sprocket hole 1.75±0.1 TAPE DIMENSIONS RECOMMENDED LAND PATTERN 0.5 Dimensions in mm K A Cavity 2.0±0.05 Type MPZ1005 RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling 160min. A 0.65±0.1 Taping Dimensions in mm B 1.15±0.1 K 0.8max. 200min. Peak 250 to 260°C Temperature 230°C 230°C 300min. Drawing direction Dimensions in mm PACKAGE QUANTITY 180°C 10s 150°C 60 to 120s 30 to 60s Time Package quantity 10,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –55 to +125°C –55 to +125°C  The storage temperature range is for after the assembly. Individual weight 1 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190423 beads_automotive_power_mpz1005_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190423 beads_automotive_power_mpz1005_en.fm