MPZ2520SPH070AT000

E M C C o m p o n e n t s Chip beads For power line MPZ series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MPZ2520 type FEATURES Noise reduction solution for power line. Because of its low DC resistance, it can handle large currents of 10A or more, optimal for low power consumption. The 2520 shape achieves the industry's highest rated current of 12A. Operating temperature range: –55 to +125°C APPLICATION Noise countermeasures for power lines of base stations Noise countermeasures for power lines of information devices such as PCs, servers, STBs, and routers Noise countermeasures for industrial equipment such as smart grids and power lines for robots, etc. PART NUMBER CONSTRUCTION MPZ 2520 S PH 070 A T 000 Series name L×W×T dimensions 2.5x2.0x0.85 mm Material name Internal code Impedance () at 100MHz Characteristic type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance [100MHz] ( ) 7 Tolerance ±3 DC resistance Rated current (m )max. 1.25 85°C (A)max. 12 Part No. 125°C (A)max. 10 MPZ2520SPH070AT000 Measurement equipment Measurement item Product No. Impedance 4991A+16192A DC resistance RM3542+IM9100 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies HIOKI Rated current vs. temperature characteristics (derating) 14 Rated current (A) 12 SPH070 10 8 6 4 2 0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20221025 beads_commercial_power_mpz2520_en.fm E M C C o m p o n e n t s MPZ2520 type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MPZ2520 series 14 12 SPH070 Impedance (Ω) 10 8 6 4 2 0 1 10 100 1000 Frequency (MHz) 10000 Z, X, R VS. FREQUENCY CHARACTERISTICS Impedance (Ω) MPZ2520SPH070AT000 14 12 10 8 6 4 2 0 1 Z R X 10 100 Frequency (MHz) 1000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20221025 beads_commercial_power_mpz2520_en.fm E M C C o m p o n e n t s MPZ2520 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 2.50±0.15 0.85±0.15 ø60min. 2.00±0.15 2.0±0.5 1.0 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 0.50±0.30 14.4max. ø180±2.0 Dimensions in mm Dimensions in mm 2.0±0.05 4.0±0.1 0.7 8.0±0.3 1.4 1.5 +0.1 –0 2.0 B 0.7 Sprocket hole 3.5±0.05 RECOMMENDED LAND PATTERN 1.75±0.1 TAPE DIMENSIONS 4.0±0.1 A K Cavity Dimensions in mm Type MPZ2520 Dimensions in mm 160min. A 2.2±0.05 Taping B 2.7±0.05 K 1.1±0.05 200min. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling 300min. Drawing direction Peak Dimensions in mm 250 to 260°C Temperature 230°C 230°C 10s max. 60 to 120s Package quantity 3000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT 180°C 150°C PACKAGE QUANTITY 30 to 60s Operating Storage temperature range temperature range –55 to +125°C –55 to +125°C  The storage temperature range is for after the assembly. Individual weight 20 mg Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20221025 beads_commercial_power_mpz2520_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20221025 beads_commercial_power_mpz2520_en.fm