NTCG104BF683FT1X

Te m p e r a t u r e P r o t e c t i o n D e v i c e s September 2024 Chip NTC thermistor Temperature protection devices Commercial grade NTCG series NTCG 0402 JIS 0402 [EIA 01005] NTCG 0603 JIS 0603 [EIA 0201] NTCG 1005 JIS 1005 [EIA 0402] NTCG 1608 JIS 1608 [EIA 0603] NTCG 2012 JIS 2012 [EIA 0805] (2/20) Temperature Protection Devices REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products REMINDERS Incorrect usage may lead to destroyed NTC thermistors and damages or malfunctions with the devices used. ⃝Please use them within the ranges of the ratings and performance provided in the catalog and delivery specifications upon confirming the environments where they are to be used and installed. ⃝Do not use them outside the operating temperature range. ⃝Do not use them with the ratings or maximum permissible power levels exceeded. ⃝Do not quickly apply 5mW or more of load with the constant-voltage power supply in the NTC thermistors as this may lead to staying in thermal runaway mode or the red-shorting of chips. ⃝Please be cautious of the applied voltage in thermistors as instruments may malfunction with the lowering of resistance due to self heating. ⃝With instruments that consumers can touch the thermistors with their hands, please carefully warn them not to touch the thermistors. ⃝Store them in locations where the temperature is 10°C to +40°C and the relative humidity is 75% or below, avoid environments where there are sudden changes in temperatures, direct sunlight, corrosive gas, grit, or dust, and keep them packed in a manner where no loading stress is applied in order to avoid deterioration and damage. (please use them within six months.) ⃝When sealing thermistors, please do so upon first considering the type, quantity, hardening conditions, and adhesiveness of the sealing material and confirming its reliability. ⃝Avoid powerful vibrations, impact (such as by dropping), pressure, etc. on thermistors that exceed the prescribed levels. ⃝Do not use them for long periods of time in environments with a relative humidity of over 85%. (this excludes cases where countermeasures have been taken.) ⃝Do not use them in the following environments. (this excludes cases where countermeasures have been taken.) ?Corrosive gases (Cl2, NH3, SOx, NOx, etc.) ?Environments with highly conductive substances (electrolytes, water, saltwater, etc.) ?Environments with acid, alkali, or organic solvents ?Dusty areas ⃝Please observe the following precautions when attaching them to substrates as failure to do so may result in destruction or malfunction. ?Do not let the substrates get warped or twisted at any time during the soldering. ?The landing size must be even on both the left and right sides. ?Do not use items that have been dropped or detached. ?Do not allow the adherence of more solder than needed. ⃝Reflow mounting is recommended with NTC thermistors, and not flow (dip) mounting. ⃝Attaching or making corrections with a soldering iron is not recommended as it can lead to troubles such as significant distorting due to thermal shock or cracking. If a soldering iron must be used, it should be 20W or below with the temperature of the tip at 350°C or below, and at a maximum of 5 seconds of soldering time. Also, do not let the tip of the soldering iron come in direct contact with the chips. ⃝Please use a substance such as resin that does not generate hydrogen (H2) when forming insulation film over chips. ⃝Please contact our sales offices when considering the use of the products listed on this catalog for applications, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property (\qspecific uses\q such as automobiles, airplanes,medical instruments, nuclear devices, etc.) as well as when considering the use for applications that exceed the range and conditions of this catalog. Please note that we are not responsible for any damages or losses incurred resulting from the use of these products that exceeds the range and conditions of this catalog or specific uses. Please take appropriate measures such as acquiring protective circuits and devices that meet the uses, applications, and conditions of the instruments and keeping backup circuits. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (3/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade Overview of the NTCG series ■CHARACTERISTICS OF CHIP NTC THERMISTORS NTC(Negative Temperature Coefficient) thermistors are manufactured from sintered metal oxides. Each thermistor consists of a combination of two to four of the following materials:Mn, Ni, Co, and Cu. NTC thermistors are semiconductor resistors that exhibit decreasing resisrance with increasing temperature. TDK thermistors have low thermal time constants which result in extremely high rates of resistance change to accurately track the temperature. ■FEATURES ⃝0402 to 2012mm wide lineup ⃝125°C ⃝UL1434 acquisition (File　No.E250289) Fig.2 Internal structure of the multilayer chip thermistors ① Fig.1 R-T Curve : 10kohm@25°C 1000 Resistance (kΩ) 100 ② 10 ⑤ 1 0.1 –40 0 50 100 Temperature (°C) 150 200 ④ ③ No. Name (1) (2) (3) (4) (5) Semiconductor ceramics Internal electrode(Pd or AgPd) Ag Terminal electrode Ni Sn ⃝RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/en/environment/rohs/index.html Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (4/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade Overview of the NTCG series ■PART NUMBER CONSTRUCTION NTC G ○○ 3E H 101 □ T □□□ Series name Structural classification shapes and dimensions Code (mm) B constant* B constant tolerance (%) Nominal resistance (Ω) Nominal resistance tolerance (%) Packaging style TDK internal code NTC thermistor G Multilayer internal electroded chip type NTC thermistor (Pb free type) 04 0402 X ±0.7 300 30 D ±0.5 T Taping 06 0603 F ±1 101 100 F ±1 1X 10 1005 H ±3 102 1000 (1kΩ) H ±3 B 16 1608 J ±5 103 10000 (10kΩ) J ±5 BX 20 2012 Commercial grade (1005mm or more) B constant: 25/85°C Commercial grade (1005mm or more) B constant: 25/50°C Commercial grade (0603mm or less) B constant: 25/85°C Commercial grade (0603mm or less) B constant: 25/50°C 1 * B constant B constant (K) 2A 2B 2C 2E 2F 2J 2K 2L 2N 2Q 2S 2000 to 2050 2051 to 2100 2101 to 2150 2201 to 2250 2251 to 2300 2401 to 2450 2451 to 2500 2501 to 2550 2601 to 2650 2701 to 2750 2801 to 2850 3A 3B 3C 3E 3F 3J 3K 3L 3N 3Q 3S 3000 to 3050 3051 to 3100 3101 to 3150 3201 to 3250 3251 to 3300 3401 to 3450 3451 to 3500 3501 to 3550 3601 to 3650 3701 to 3750 3801 to 3850 4A 4B 4C 4E 4F 4J 4K 4L 4N 4Q 4S 4000 to 4050 4051 to 4100 4101 to 4150 4201 to 4250 4251 to 4300 4401 to 4450 4451 to 4500 4501 to 4550 4601 to 4650 4701 to 4750 4801 to 4850 The B constant indicates the magnitude of a change in a zero-load resistance value to a temperature, and is obtained based on arbitrary two temperatures in resistance-to-temperature characteristics. B constant calculation formula B= InR1–InR2 (1/T1)–(1/T2) B: B constant (K) T1: Arbitrary temperature (K) T2: Arbitrary temperature different from T1 (K) R1:Zero-load resistance value at temperature T1(Ω) R2: Zero-load resistance value at temperature T2(Ω) Each temperature is measured in absolute temperature. 0°C=273.15K L (mm) W (mm) T (mm) B (mm) 0402 0603 1005 1608 2012 0.40±0.02 0.60±0.03 1.00±0.05 1.60±0.10 2.00±0.20 0.20±0.02 0.30±0.03 0.50±0.05 0.80±0.10 1.25±0.20 0.20±0.02 0.30±0.03 0.50±0.05 0.80±0.10 0.70±0.20 0.07min 0.1min 0.1min 0.2min 0.2min L W Shape symbol (JIS) T B Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (5/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade Overview of the NTCG series ■RATINGS Size mm 0402 0603 1005 1608 2012 Maximum rated power (25°C) *1 mW 60 100 100 100 200 Dissipation factors (25°C) *2 mW/°C | mW/K 0.6 1 1 1 2 *1 Maximum rated power: Maximum power: at rated temperature (25°C), maximum power that can be applied continuously *2 Dissipation factors: powered that it is equivalent that be increased in self-heating by load power thermistor at 1°C temperature Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (6/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　0402 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 0.2±0.02 0.18 to 0.20 0.4±0.02 0.15 to 0.20 0.2 Nom. 0.15 to 0.20 Dimensions in mm 0.2±0.02 0.07min. Dimensions in mm ■JIS 0402 [EIA 01005] (Operating temperature range : -40 to 125°C) Part No. NTCG043JF103FTBX NTCG044EF104FTBCX NTCG044EF474FTBCX Resistance value [25°C] (Ω) 10,000 100,000 470,000 Resistance tolerance ±1% ±1% ±1% B constant B constant B constant B constant [25/50°C] (K) 3380 4250 4250 [25/75°C] (K) 3413 4283 4293 [25/85°C] (K) 3426 4293 4308 [25/100°C] (K) 3445 4306 4306 B constant tolerance (K) ±1% ±1% ±1% Permissible operating current Operating temperature range [25°C] (mA) 0.24 0.07 0.03 (°C) –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (7/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　0603 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 0.3±0.03 0.25 to 0.35 0.6±0.03 0.2 to 0.3 0.25 to 0.35 0.2 to 0.3 Dimensions in mm 0.3±0.03 0.15±0.05 Dimensions in mm ■JIS 0603 [EIA 0201] (Operating temperature range : -40 to 125°C) Part No. NTCG063JF103FTBA NTCG063JF103HTBA NTCG063JH103HTBA NTCG063JH103JTBA NTCG063UH103HTBX NTCG064BH103HTB NTCG064BH103JTB NTCG063JF223HTBXA NTCG063JF223HTBX NTCG064BF473FTBX NTCG064BF473HTBX NTCG064BF473JTBX NTCG064EF683FTBX NTCG064EF683JTBX NTCG064EF104FTBX NTCG064EF104HTBX NTCG064EF104JTBX Resistance value [25°C] (Ω) 10,000 10,000 10,000 10,000 10,000 10,000 10,000 22,000 22,000 47,000 47,000 47,000 68,000 68,000 100,000 100,000 100,000 Resistance tolerance +/–1% +/–3% +/–3% +/–5% +/–3% +/–3% +/–5% +/–3% +/–3% +/–1% +/–3% +/–5% +/–1% +/–5% +/–1% +/–3% +/–5% B constant B constant B constant B constant [25/50°C] (K) 3380 3380 3380 3380 3900 4067 4067 3380 3380 4050 4050 4050 4250 4250 4250 4250 4250 [25/75°C] (K) 3422 3422 3422 3422 3934 4092 4092 3422 3422 4098 4098 4098 4293 4293 4293 4293 4293 [25/85°C] (K) 3435 3435 3435 3435 3950 4100 4100 3435 3435 4114 4114 4114 4308 4308 4308 4308 4308 [25/100°C] (K) 3453 3453 3453 3453 3971 4110 4110 3453 3453 4137 4137 4137 4327 4327 4327 4327 4327 B constant tolerance +/–1% +/–1% +/–3% +/–3% +/–3% +/–3% +/–3% +/–1% +/–1% +/–1% +/–1% +/–1% +/–1% +/–1% +/–1% +/–1% +/–1% Permissible operating current Operating temperature range [25°C] (mA) 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.21 0.21 0.14 0.14 0.14 0.12 0.12 0.10 0.10 0.10 (°C) –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (8/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　1005 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 0.5±0.05 0.4 to 0.6 1±0.05 0.35 to 0.45 0.3 to 0.5 0.35 to 0.45 Dimensions in mm 0.5±0.05 0.1 min. Dimensions in mm ■JIS 1005 [EIA 0402] (22 to 15kΩ : Operating temperature range : -40 to 125°C) Part No. NTCG103EH220JT1 NTCG103EH300JT1 NTCG103EH400HT1 NTCG103EH400JT1 NTCG103EH470JT1 NTCG103EH101HT1 NTCG103EH101JT1 NTCG103NH471JT1 NTCG103NH681JT1 NTCG104BH102HT1 NTCG104BH102JT1 NTCG104BH152JT1 NTCG104BH222JT1 NTCG104BH332JT1 NTCG103LH472JT1 NTCG104BH472HT1 NTCG104BH472JT1 NTCG104BH682JT1 NTCG103JF103FT1A NTCG103JF103FT1 NTCG103JF103HT1A NTCG103JF103HT1 NTCG103JF103JT1 NTCG103JH103HT1A NTCG103JH103HT1 NTCG103JH103JT1A NTCG103JH103JT1 NTCG103JX103DT1 NTCG103UH103HT1 NTCG103UH103JT1 NTCG104BH103HT1 NTCG104BH103JT1 NTCG104BH153HT1 NTCG104BH153JT1 Resistance value [25°C] (Ω) 22 30 40 40 47 100 100 470 680 1,000 1,000 1,500 2,200 3,300 4,700 4,700 4,700 6,800 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 15,000 15,000 Resistance tolerance +/–5% +/–5% +/–3% +/–5% +/–5% +/–3% +/–5% +/–5% +/–5% +/–3% +/–5% +/–5% +/–5% +/–5% +/–5% +/–3% +/–5% +/–5% +/–1% +/–1% +/–3% +/–3% +/–5% +/–3% +/–3% +/–5% +/–5% +/–0.5% +/–3% +/–5% +/–3% +/–5% +/–3% +/–5% B constant B constant B constant B constant B constant tolerance [25/50°C] (K) 3244 3244 3244 3244 3244 3244 3244 3642 3642 4096 4096 4096 4096 4067 3500 4067 4067 4067 3380 3380 3380 3380 3380 3380 3380 3380 3380 3380 3900 3900 4067 4067 4067 4067 [25/75°C] (K) 3249 3249 3249 3249 3249 3249 3249 3649 3649 4100 4100 4100 4100 4092 3532 4092 4092 4092 3422 3422 3422 3422 3422 3422 3422 3422 3422 3422 3934 3934 4092 4092 4092 4092 [25/85°C] (K) 3250 3250 3250 3250 3250 3250 3250 3650 3650 4100 4100 4100 4100 4100 3545 4100 4100 4100 3435 3435 3435 3435 3435 3435 3435 3435 3435 3435 3950 3950 4100 4100 4100 4100 [25/100°C] (K) 3251 3251 3251 3251 3251 3251 3251 3650 3650 4100 4100 4100 4100 4110 3564 4110 4110 4110 3453 3453 3453 3453 3453 3453 3453 3453 3453 3453 3971 3971 4110 4110 4110 4110 +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–1% +/–1% +/–1% +/–1% +/–1% +/–3% +/–3% +/–3% +/–3% +/–0.7% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% Permissible operating current Operating temperature range [25°C] (mA) 6.70 5.70 5.00 5.00 4.61 3.10 3.10 1.40 1.20 1.00 1.00 0.81 0.67 0.55 0.46 0.46 0.46 0.38 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.25 0.25 (°C) –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (9/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　1005 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 0.5±0.05 0.4 to 0.6 1±0.05 0.35 to 0.45 0.3 to 0.5 0.35 to 0.45 Dimensions in mm 0.5±0.05 0.1 min. Dimensions in mm ■JIS 1005 [EIA 0402] (22K to 1,000kΩ : Operating temperature range : -40 to 125°C) Part No. NTCG104LH223HT1 NTCG104LH223JT1 NTCG104LH333JT1 NTCG104BF473FT1X NTCG104BF473HT1X NTCG104BF473JT1X NTCG104LH473HT1 NTCG104LH473JT1 NTCG104BF683FT1X NTCG104BF683HT1X NTCG104BF683JT1X NTCG104LH683HT1 NTCG104LH683JT1 NTCG104ED104DT1X NTCG104EF104FT1X NTCG104EF104HT1X NTCG104EH104HT1X NTCG104KF104FT1 NTCG104KF104HT1 NTCG104LH104HT1 NTCG104LH104JT1 NTCG104LH154JT1 NTCG104QH224HT1 NTCG104QH224JT1 NTCG104QH334HT1 NTCG104QH334JT1 NTCG104QH474HT1 NTCG104QH474JT1 NTCG104QH105HT1 NTCG104QH105JT1 Resistance value [25°C] (W) 22,000 22,000 33,000 47,000 47,000 47,000 47,000 47,000 68,000 68,000 68,000 68,000 68,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 150,000 220,000 220,000 330,000 330,000 470,000 470,000 1,000,000 1,000,000 Resistance tolerance +/–3% +/–5% +/–5% +/–1% +/–3% +/–5% +/–3% +/–5% +/–1% +/–3% +/–5% +/–3% +/–5% +/–0.5% +/–1% +/–3% +/–3% +/–1% +/–3% +/–3% +/–5% +/–5% +/–3% +/–5% +/–3% +/–5% +/–3% +/–5% +/–3% +/–5% B constant B constant B constant B constant B constant tolerance [25/50°C] (K) 4485 4485 4485 4050 4050 4050 4485 4485 4085 4085 4085 4485 4485 4250 4250 4250 4250 4419 4419 4485 4485 4485 4661 4661 4661 4661 4661 4661 4661 4661 [25/75°C] (K) 4533 4533 4533 4098 4098 4098 4533 4533 4134 4134 4134 4533 4533 4293 4293 4293 4293 4468 4468 4533 4533 4533 4728 4728 4728 4728 4728 4728 4728 4728 [25/85°C] (K) 4550 4550 4550 4114 4114 4114 4550 4550 4150 4150 4150 4550 4550 4308 4308 4308 4308 4485 4485 4550 4550 4550 4750 4750 4750 4750 4750 4750 4750 4750 [25/100°C] (K) 4573 4573 4573 4137 4137 4137 4573 4573 4172 4172 4172 4573 4573 4327 4327 4327 4327 4508 4508 4573 4573 4573 4780 4780 4780 4780 4780 4780 4780 4780 +/–3% +/–3% +/–3% +/–1% +/–1% +/–1% +/–3% +/–3% +/–1% +/–1% +/–1% +/–3% +/–3% +/–0.5% +/–1% +/–1% +/–3% +/–1% +/–1% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% Permissible operating current Operating temperature range [25°C] (mA) 0.21 0.21 0.17 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.06 0.06 0.05 0.05 0.04 0.04 0.03 0.03 (°C) –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (10/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　1608 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 0.8±0.1 0.6 to 0.8 1.6±0.1 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 Dimensions in mm 0.8±0.1 0.2 min. Dimensions in mm ■JIS 1608 [EIA 0603] (30 to 10kΩ : Operating temperature range : -40 to 125°C) Part No. NTCG163EH300JT1 NTCG163EH400HT1 NTCG163EH400JT1 NTCG163EH101HT1 NTCG163EH101JT1 NTCG163EH151JT1 NTCG163NH221JT1 NTCG163NH331JT1 NTCG163NH471JT1 NTCG164BH102HT1 NTCG164BH102JT1 NTCG164BH222JT1 NTCG164BH302JT1 NTCG164BH332HT1 NTCG164BH332JT1 NTCG164BH472HT1 NTCG164BH472JT1 NTCG164BH682JT1 NTCG163JF103FT1A NTCG163JF103FT1 NTCG163JF103HT1A NTCG163JF103HT1 NTCG163JH103HT1A NTCG163JH103HT1 NTCG163JH103JT1A NTCG163JH103JT1 NTCG164BF103HT1 NTCG164BH103HT1 NTCG164BH103JT1 Resistance value [25°C] (Ω) 30 40 40 100 100 150 220 330 470 1,000 1,000 2,200 3,000 3,300 3,300 4,700 4,700 6,800 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 Resistance tolerance +/–5% +/–3% +/–5% +/–3% +/–5% +/–5% +/–5% +/–5% +/–5% +/–3% +/–5% +/–5% +/–5% +/–3% +/–5% +/–3% +/–5% +/–5% +/–1% +/–1% +/–3% +/–3% +/–3% +/–3% +/–5% +/–5% +/–3% +/–3% +/–5% B constant B constant B constant B constant B constant tolerance [25/50°C] (K) 3244 3244 3244 3244 3244 3244 3642 3642 3642 4096 4096 4096 4067 4067 4067 4067 4067 4067 3380 3380 3380 3380 3380 3380 3380 3380 4037 4067 4067 [25/75°C] (K) 3249 3249 3249 3249 3249 3249 3649 3649 3649 4100 4100 4100 4100 4092 4092 4092 4092 4092 3422 3422 3422 3422 3422 3422 3422 3422 4092 4092 4092 [25/85°C] (K) 3250 3250 3250 3250 3250 3250 3650 3650 3650 4100 4100 4100 4100 4100 4100 4100 4100 4100 3435 3435 3435 3435 3435 3435 3435 3435 4070 4100 4100 [25/100°C] (K) 3251 3251 3251 3251 3251 3251 3650 3650 3650 4100 4100 4100 4110 4110 4110 4110 4110 4110 3453 3453 3453 3453 3453 3453 3453 3453 4080 4110 4110 +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–1% +/–1% +/–1% +/–1% +/–3% +/–3% +/–3% +/–3% +/–1% +/–3% +/–3% Permissible operating current Operating temperature range [25°C] (mA) 5.70 5.00 5.00 3.10 3.10 2.50 2.10 1.70 1.40 1.00 1.00 0.67 0.57 0.55 0.55 0.46 0.46 0.38 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 (°C) –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (11/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　1608 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 0.8±0.1 0.6 to 0.8 1.6±0.1 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 Dimensions in mm 0.8±0.1 0.2 min. Dimensions in mm ■JIS 1608 [EIA 0603] (15k to 1,000kΩ : Operating temperature range : -40 to 125°C) Part No. NTCG164BH153JT1 NTCG164LH223HT1 NTCG164LH223JT1 NTCG164LH333JT1 NTCG164LH473HT1 NTCG164LH473JT1 NTCG164LH683HT1 NTCG164LH683JT1 NTCG164KF104FT1 NTCG164LH104HT1 NTCG164LH104JT1 NTCG164LH154HT1 NTCG164LH154JT1 NTCG164QH224HT1 NTCG164QH224JT1 NTCG164QH334JT1 NTCG164QH474HT1 NTCG164QH474JT1 NTCG164QH105HT1 NTCG164QH105JT1 Resistance value [25°C] (Ω) 15,000 22,000 22,000 33,000 47,000 47,000 68,000 68,000 100,000 100,000 100,000 150,000 150,000 220,000 220,000 330,000 470,000 470,000 1,000,000 1,000,000 Resistance tolerance +/–5% +/–3% +/–5% +/–5% +/–3% +/–5% +/–3% +/–5% +/–1% +/–3% +/–5% +/–3% +/–5% +/–3% +/–5% +/–5% +/–3% +/–5% +/–3% +/–5% B constant B constant B constant B constant B constant tolerance [25/50°C] (K) 4067 4485 4485 4485 4485 4485 4485 4485 4419 4485 4485 4485 4485 4661 4661 4661 4661 4661 4661 4661 [25/75°C] (K) 4092 4533 4533 4533 4533 4533 4533 4533 4468 4533 4533 4533 4533 4728 4728 4728 4728 4728 4728 4728 [25/85°C] (K) 4100 4550 4550 4550 4550 4550 4550 4550 4485 4550 4550 4550 4550 4750 4750 4750 4750 4750 4750 4750 [25/100°C] (K) 4110 4573 4573 4573 4573 4573 4573 4573 4508 4573 4573 4573 4573 4780 4780 4780 4780 4780 4780 4780 +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–1% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% +/–3% Permissible operating current Operating temperature range [25°C] (mA) 0.25 0.21 0.21 0.17 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.08 0.08 0.06 0.06 0.05 0.04 0.04 0.03 0.03 (°C) –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (12/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　2012 type ■SHAPE & DIMENSIONS ■RECOMMENDED LAND PATTERN 1.25±0.2 0.9 to 1.2 2±0.2 0.7 to 0.9 0.9 to 1.2 0.7 to 0.9 Dimensions in mm 0.7±0.2 0.2 min. Dimensions in mm ■JIS 2012 [EIA 0805] (Operating temperature range : -40 to 125°C) Part No. NTCG203NH103JT1 NTCG204AH473JT1 NTCG204CH104JT1 Resistance value [25°C] (Ω) 10,000 47,000 100,000 Resistance tolerance +/–5% +/–5% +/–5% B constant B constant B constant B constant [25/50°C] (K) 3590 3931 4085 [25/75°C] (K) 3635 3982 4134 [25/85°C] (K) 3650 4000 4150 [25/100°C] (K) 3670 4023 4172 B constant tolerance +/–3% +/–3% +/–3% Permissible operating current Operating temperature range [25°C] (mA) 0.44 0.20 0.14 (°C) –40 to 125 –40 to 125 –40 to 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (13/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade NTCG series　RT table ■R-T TABLE ACQUISITION PROCEDURE 1. Access the top page of the TDK chip NTC thermistor (protective device) https://product.tdk.com/en/products/sensor/ntc/chip-ntc-thermistor/index.html 2. Click [Search by Part No.] https://product.tdk.com/en/search/sensor/ntc/chip-ntc-thermistor/part_no 3. Enter the product name you want in the RT table in the box and click the Search button. ( Example：NTCG103JF103FT1 ) Wildcard and Multiple Part number. NTCG103JF103FT1 Question mark (?) and asterisk (*) can be used as wildcard characters. Search The question mark (?) matches any single character, and the asterisk (*) matches any sequence of characters. Enable the real time search Enter only one part number per line. Up to 50 part numbers can be searched simultaneously. A part number search is normally performed using a prefix search. If you wish to use a suffix search, enter an exclamation mark (!) at the end of the Part No. 4. Click the displayed product name. ( Example：NTCG103JF103FT1 ) Catalog / Check Data Images Sheet Part No. Distributor Inventory Brand Buy Now TDK Apps. Feature 125°C UL NTCG103JF103FT1 New NTCG103JF103FT1S Buy Now TDK 150°C AEC-Q200 5. Individual pages are displayed and click the RT table in the "Document" on the right side bar. Documents Catalog RoHS Certificate SVHC/REACH Certificate Selection Guide RT Sheet 6. You can download the csv file in the 1°C step of the RT table for the product. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (14/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade Attention in the board design ■BOARD DESIGN When attached to NTC substrate thermistor, amount of silver used (fillet size) has direct impact on NTC thermistor after mounting. Thus, sufficient consideration is necessary. Set of land dimensions (1) As the stress rises in the NTC thermistor owing to the increase in silver, breakage and cracks will occur. Cause including crack, as caution on board land design, configure the shape and dimensions so that the amount of silver is appropriate. If you installed 2 or more parts in the Common Land, separated by a solder resist and special land of each component. (2) When peak levels panning-at soldering is excessive, by solder contraction stress, mechanical-thermal stress causes a Yasuku chip crack. In addition, when the peak level is underestimated, terminal electrode fixed strength is insufficient. This causes chip dropouts and may affect circuit reliability. Representative example of the panning of peak levels is shown in the following. Recommended silver dose Solder stress is increased, and it is easy for a crack to form. Solder volume overload Most large serving amount Minimum prime amount Decent solder volume Fixed strength is weak, and there is connection a problem and risk of loss. Solder volume deficit Case and suggested protocol want to avoid Example Improvement example (land division) Cases to avoid Leads Lead wire and land of part discrete doubles up Chip Leads Solder Solder resist PCB Chassis Arrangements in the vicinity Solder resist Solder (ground solder) L2 L1 L2>L1 Land Arrangements of chip component\qs companion Solder resist Excess solder Land Missing solder Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20240924 / tpd_commercial_ntc-thermistor_ntcg_en (15/20) Temperature Protection Devices Chip NTC thermistor RoHS Directive Compliant Product Compatible with lead-free solders Commercial grade Attention in the board design Arrangements of components (1) I was based on camber of substrate and suggested protocol of NTC thermistor arrangement, as stress does not join to the utmost is shown in following. (2) In payment near by board, depending on mount position of NTC PTC, as mechanical stress varies, please refer to the following diagram. Substrate for flexural stress Substrate for flexural stress Adverse events Good example E D Perforation Perforation or slit C Perforation or slit Direction of surface solder B A Solder the mountain fold as Solder the mountain fold as a top. a bottom. Perforation or slit Perforation or slit Slit The order of A > B = C > D > E eases the stress. Chip arrangements (direction) Mounted vertically to the perforation and slit. L1 Distance from perforation and slit portion Mounted horizontally to the perforation and slit. L2 (L1