PLEA67BBA1R0M-1PT00

I N D U C T O R S Inductors for power circuits Thin-film metal magnetic material PLE series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free PLEA67BBA type FEATURES Thin-film power inductor based on the thin-film processing techniques and metallic magnetic materials. Due to the high magnetic permeability magnetic material, it has both high inductance of 2.2uH and low DC resistance in spite of its small size of 1006 (L1.0xW0.6xT0.7mm). The low-loss magnetic material makes it possible to achieve low AC loss and provide a highly efficient power supply circuit in solutions that emphasize AC loss. APPLICATION Wearable product (wireless earphones and smart watch), small power supply module and low power consumption communication module of Bluetooth Low Energy Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION PLE A67 BBA Series name L×W×H dimensions 1.0x0.6x0.7 mm Characteristic type - 2R2 M Inductance (µH) Inductance tolerance - 1P T 00 Number of lines Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE L L measuring frequency Rated current DC resistance Isat Itemp (µH) Tolerance (MHz) (m )max. (m )typ. (A)max. (A)typ. (A)max. 2.2 ±20% 1.0 620 510 0.5 0.6 0.5  Rated current: smaller value of either Isat or Itemp. Isat: When based on the inductance change rate (30% below the initial L value) Itemp: When based on the temperature increase (temperature increase of 40°C by self heating) Part No. (A)typ. 0.8 PLEA67BBA2R2M-1PT00 Measurement equipment Measurement item Product No. L E4991 DC resistance 4338A Rated current Isat E4991+16200B ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating temperature range Storage temperature range –40 to +125 °C –40 to +85 °C  Operating temperature range includes self-temperature rise.  The storage temperature range is for after the assembly. Individual weight 3 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20210114 inductor_commercial_power_plea67bba_en.fm I N D U C T O R S PLEA67BBA type L FREQUENCY CHARACTERISTICS 4 Inductance(nH) 3 2 1 0 1 10 100 1000 Frequency(MHz) Measurement equipment Product No. Manufacturer E4991 Keysight Technologies ＊ Equivalent measurement equipment may be used. INDUCTANCE VS. DC BIAS CHARACTERISTICS 2.5 Inductance(µH) 2 1.5 1 0.5 0 0 0.1 0.2 0.3 0.4 0.5 DC current(A) 0.6 0.7 0.8 0.9 Measurement equipment Product No. Manufacturer E4991+16200B Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20210114 inductor_commercial_power_plea67bba_en.fm I N D U C T O R S PLEA67BBA type SHAPE & DIMENSIONS PACKAGING STYLE 0.60max. 0.80max. REEL DIMENSIONS ø60min. 1.0 0.60±0.10 1.00±0.10 2.0±0.5 9.0±0.3 ø13±0.2 14.4max. ø21±0.8 0.20±0.10 ø180±2.0 Dimensions in mm Dimensions in mm 1.5 +0.1 –0.0 2.0±0.05 4.0±0.1 0.31 0.58 8.0±0.2 B 0.32 RECOMMENDED LAND PATTERN 3.5±0.05 Sprocket hole 1.75±0.1 TAPE DIMENSIONS A K 0.31 Cavity 2.0±0.05 Dimensions in mm Dimensions in mm Type PLEA67 160min. A 0.76 Taping B 1.22 K 0.98 100 to 200min. RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Drawing direction 400 or over Peak Dimensions in mm 245°C PACKAGE QUANTITY Temperature 230°C 230°C Package quantity 5000 pcs/reel 180°C 5s max. 150°C 60 to 120s 10 to 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20210114 inductor_commercial_power_plea67bba_en.fm I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 20 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20210114 inductor_commercial_power_plea67bba_en.fm