RDS602412

TDK-Lambda RDS60-24 SPECIFICATIONS B028-01-01E MODEL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 ITEMS Nominal Output Voltage Maximum Output Current Maximum Output Power Efficiency (Typ) Input Voltage Range Input Current (Typ) Inrush Current (Typ) Output Voltage Range Maximum Ripple Maximum Ripple & Noise Maximum Line Regulation Maximum Load Regulation Temperature Coefficient Over Current Protection Over Voltage Protection Remote ON/OFF control Parallel Operation Series Operation Operating Temperature Operating Humidity Storage Temperature Storage Humidity Cooling Withstand Voltage 25 26 Isolation Resistance Vibration - 27 Shock - 28 Safety - 29 30 31 Conducted Emission Radiated Emission Immunity - (*1) (*1) (*1) (*8) (*2) (*2) (*3) (*4) (*5) (*6) (*7) V A W % A V mV mV mV mV A V - RDS60-24-5 RDS60-24-12 RDS60-24-15 RDS60-24-24 5 12 60 78 12 5 60 15 4 60 24 2.5 60 80 79 18 - 32VDC 3.3 4.7A at Cold Start 4.5 - 5.5 10.8 - 13.2 13.5 - 16.5 21.6 - 26.4 50 80 80 100 100 170 200 290 40 96 120 192 100 100 100 200 Less than 0.02 %/℃ 12.3 - 13.8 5.2 - 6.0 4.2 - 4.9 2.6 - 3.1 6.0 - 7.5 15.0 - 18.0 17.6 - 22.5 28.0 - 36.0 Possible Possible -20 - +60°C (-20 - +50°C:100%, +60°C:70%) 20 - 95%RH (No Condensing) -25 - +75°C 20 - 95%RH (No Condensing) Convection Cooling I/P - O/P, I/P - FG : 2kVAC (10mA) for 1min., O/P - CNT(RC) : 100VAC (100mA) for 1min. O/P - FG : 500VDC 100Mohm, O/P - CNT(RC) : 100VDC 10Mohm 10 - 55Hz : 19.6m/s 2, X,Y,Z 1hour each. Designed to meet JIS E 3014-2-B 294m/s2 (time : 6±3ms) Designed to meet JIS E 3015-2-B Approved by UL60950-1 & CSA60950-1, Designed to meet EN60950-1 Designed to meet EN55011/EN55022-A, FCC-ClassA, VCCI-A Designed to meet EN55011/EN55022-A, FCC-ClassA, VCCI-A Designed to meet IEC61000-4-2(Level 2,3), -4(Level 3), -8(Level 4) 32 Weight (Typ) g 550 33 Size (W x H x D) mm 43 x 95 x 160 ( Refer to Outline Drawing ) *Read instruction manual carefully, before using the power supply unit. =NOTES= *1. At 24VDC, Ta=25°C, nominal output voltage and maximum output power. *2. Measure with JEITA RC-9131A probe, Bandwidth of scope :100MHz. *3. 18 - 32VDC, constant load. *4. No load-Full load, constant input voltage. *5. OCP TYPE : Constant current limit with automatic recovery. *6. OVP circuit will shut the output down, manual reset (Re power on). *7. Ratings - Derating at standard mounting. Refer to output derating curve(B028-01-02_). - Load (%) is percent of maximum output power or maximum output current, whichever is greater. *8. At 24VDC Input.(Refer to instruction manual.) TDK-Lambda RDS60-24 OUTPUT DERATING B028-01-02A *COOLING : CONVECTION COOLING LOAD (%) Ta (°C) -20 - +40 50 60 MOUNTING A 100 100 70 MOUNTING B 100 70 - OUTPUT DERATING CURVE 120 LOAD (%) 100 80 MOUNTING A 60 MOUNTING B 40 20 0 -20 -10 0 10 20 30 40 50 60 70 80 Ta (°C) DON'T USE MOUNTING A (STANDARD MOUNTING) MOUNTING B MOUNTING C MOUNTING D MOUNTING E