TCM0605M-900-2P-T201

E M C C o m p o n e n t s Common mode filters High-speed differential signal line (MIPI D-PHY, USB2.0, etc.) TCM-M series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free TCM0605M type FEATURES Thin-film common mode filter based on the thin-film processing techniques and material technology cultivated from HDD head manufacturing. By optimizing the design, the signal transmission speed can be broadened (cutoff frequency of 4.8GHz or more) while also exerting a large noise suppression effect. This is the compact 0605 size (0.65x0.50x0.30mm) type. Operating temperature range: –25 to +85°C APPLICATION Noise countermeasure for ultra-high-speed differential interfaces (MIPI-D PHY, USB2.0, HDMI, etc.) for mobile devices and general consumer products such as smart phones, tablets, digital cameras, and portable music players. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION TCM 0605 M - Series name L×W×T dimensions 0.65×0.5×0.3 mm Product internal code 900 - 2P Impedance () at 100MHz - Number of lines T 201 Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Common mode attenuation (dB) 24.0 dB min.＠700M to 850MHz 24.0 dB min.＠850M to 1.0GHz 12.0 dB min.＠1.0G to 2.0GHz 22.0 dB min.@700M to 850MHz 26.0 dB min.@850M to 1.0GHz 14.0 dB min.@1.0G to 2.0GHz Common mode impedance [at 100MHz] DC resistance [1 line] ( ) Cutoff frequency Rated current Rated voltage Insulation resistance Part No. (GHz) (A)max. (V)max. (M )min. 105 typ. 2.6±30% 5.0 typ. 0.1 10 10 TCM0605M-900-2P-T201 80 typ. 2.6±30% 4.8 typ. 0.1 10 10 TCM0605M-650-2P-T201 Measurement equipment Measurement item Product No. Common mode impedance 4291A DC resistance 4338A Insulation resistance 4339A ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20181101 cmf_commercial_signal_tcm0605m_en.fm E M C C o m p o n e n t s TCM0605M type IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 Impedance (Ω) 1000 900 Common mode 650 Common mode 100 650 Differential mode 10 900 Differential mode 1 1 10 100 Frequency (MHz) 1000 10000 Measurement equipment Product No. Manufacturer 4991A Keysight Technologies ＊ Equivalent measurement equipment may be used. INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 650 Differential mode 900 Differential mode Attenuation(dB) 10 20 900 Common mode 650 Common mode 30 40 50 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer E5071B Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20181101 cmf_commercial_signal_tcm0605m_en.fm E M C C o m p o n e n t s TCM0605M type PACKAGING STYLE SHAPE & DIMENSIONS REEL DIMENSIONS 0.50±0.05 4 2 3 2.0±0.5 +1 ø60 –0 0.30±0.05 0.15typ. 0.65±0.05 1 0.45±0.05 0.20±0.05 1.0 9+0.3 ø13±0.2 ø21±0.8 13+1.4 +0 ø180 –3 0.15±0.05 Dimensions in mm Dimensions in mm 4.0 8.0 B 0.25 2 3 A K 0.3 2.0 0.23 4 0.71 1 ø1.5 1.75 Sprocket hole 0.8 3.5 TAPE DIMENSIONS RECOMMENDED LAND PATTERN 0.2 Cavity 2.0 Dimensions in mm Dimensions in mm Type TCM0605M CIRCUIT DIAGRAM 1 4 2 3 160min. A 0.63 Taping B 0.77 K 0.35 200min. • No polarity 300min. Drawing direction RECOMMENDED REFLOW PROFILE Dimensions in mm Preheating Soldering Natural cooling Peak Package quantity 245°C Temperature 230°C 230°C 180°C 5s max. 150°C 60 to 120s PACKAGE QUANTITY 10000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –25 to +85 °C –25 to +85 °C  Operating temperature range includes self-heating.  The storage temperature range is for after the assembly. Individual weight 0.5 mg 10 to 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20181101 cmf_commercial_signal_tcm0605m_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20181101 cmf_commercial_signal_tcm0605m_en.fm