TCM0906C-400-3P-T200

E M C C o m p o n e n t s Common mode filters High-speed signal line (MIPI C-PHY) TCM-C series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free TCM0906C type FEATURES This product is a thin-film common-mode filter compatible with the MIPI C-PHY used as an interface for cameras or displays installed in mobile terminals. By ensuring common mode impedance, the signal transmission characteristics of each line are balanced while exerting a high noise suppression effect, and this has little effect on high-speed transmission signals. 0906 (0.875×0.650×0.300mm, dimensional tolerance ±0.05mm), small thin film common mode filter with three lines Operating temperature range: –25 to +85°C (including self-temperature rise) APPLICATION Anti-noise measures for high-speed differential transmission lines (MIPI C-PHY) for mobile devices such as smart phones and tablet terminals Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION TCM 0906 C Series name L×W×T dimensions 0.875×0.65×0.4 mm Product internal code - 400 - Impedance () at 100MHz 3P - Number of lines T 200 Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Common mode attenuation (dB) 18 min: @800M to 1.0GHz 20 min: @1.0G to 1.6GHz DC resistance [1 line] ( ) Line1 : 3.0+/–30% Line2 : 2.2+/–30% Line3 : 3.0+/–30% Cutoff frequency Common mode Rated impedance current Rated voltage Insulation resistance Part No. [100MHz] (GHz)typ. ()typ. (mA) (V) (M )min. 5.0 40 100 5 10 TCM0906C-400-3P-T200 Measurement equipment Measurement item Product No. Common mode attenuation E5071B DC resistance 4338A Insulation resistance 4339A ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20181101 cmf_commercial_signal_tcm0906c_en.fm E M C C o m p o n e n t s TCM0906C type INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 400 Differential mode Line2-3 400 Differential mode Line1-2 400 Differential mode Line1-3 –5 Attenuation (dB) –10 400 Common mode –15 –20 –25 –30 –35 1 10 100 Frequency (MHz) 1000 10000 Measurement equipment Product No. Manufacturer E5071B Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20181101 cmf_commercial_signal_tcm0906c_en.fm E M C C o m p o n e n t s TCM0906C type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 2 5 3 4 E 2.0±0.5 0.15typ. 6 0.175±0.04 0.35typ. ø60 –0 +1 0.40±0.05 1.0 0.15±0.04 0.175±0.04 0.875±0.05 0.65±0.05 1 9+0.3 ø13±0.2 ø21±0.8 Dimensions in mm 13+1.4 +0 ø180 –3 Dimensions in mm RECOMMENDED LAND PATTERN 2 5 Sprocket hole 0.875 2.0±0.5 4.0±0.1 8.0±0.3 4 0.35 0.275 B 0.175 0.175 3 1.5 +0.1 –0.0 3.5±0.05 6 0.35 1 1.75±0.1 TAPE DIMENSIONS 0.90 Dimensions in mm A K Cavity 2.0±0.5 Dimensions in mm CIRCUIT DIAGRAM 1 6 2 5 3 4 Type TCM0906C 160min. A 0.96 Taping B 0.74 K 0.50 200min. • No directionality 300min. Drawing direction RECOMMENDED REFLOW PROFILE Preheating Soldering Dimensions in mm Natural cooling PACKAGE QUANTITY Package quantity Peak 10,000 pcs/reel 245°C Temperature 230°C 230°C 180°C 5s max. 150°C 60 to 120s TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage Individual temperature range temperature range weight –25 to +85 °C –25 to +85 °C 1.4 mg  Operating temperature range includes self-temperature rise.  The storage temperature range is for after the assembly. 10 to 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20181101 cmf_commercial_signal_tcm0906c_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 20 to 70% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20181101 cmf_commercial_signal_tcm0906c_en.fm