TH120048

TH Series 1200 to 2500W Front End Power Supplies ‹ ‹ ‹ ‹ 1U High Up to 10,000W in 19” Rack Hot Swap Capable High Efficiency Key Market Segments & Applications Power for distributed Power Architecture Factory Automation Features and Benefits Feature Benefit 1U high ‹ Hotswap capable ‹ High efficiency ‹ Full array of signals Utilizes less cabinet space Suitable for N+1 redundancy ‹ Higher density ‹ Easier system monitoring ‹ ‹ ‹ Specifications MODEL ITEMS Nominal Voltage V Output Voltage Range VDC Total Regulation % Output Current A(max) Current limit (1) A Short Circuit Current % Output Noise mV Output Rise Time ms Dynamic Response % Overvoltage Protection (1) VDC Load Sharing % I2C Programing Signals (opto isolated) (4) Remote On/Off V Auxiliary Output (3) AC Input VAC Input Frequency Hz Power Factor Inrush Current (2) A Efficiency (at full load) % Immunity EMC (conducted and radiated) Operating Temperature °C Storage Temperature °C Humidity % Altitude ft Shock G Vibration Hz Safety Agency Size (L x W x H) in. Weight lbs Warranty - TH120012(5) TH120024 TH120048 TH250048(5) 12 10.5-14 24 21-28 48 42-56 48 42-56 ±1% 50 25 50 60 30 60 75 37 75 250mV peak to peak (10kHz to 20MHz) 100-400 ms 3% in 10ms for a 10-100% load change 13-15 27-30 50-60 50-60 ±5% Set output Volt, Monitors AC present, Converter OK, Thermal Profile, Fan fail AC Fail, Module Alarm, Temp Alarm Shuts down outputs by applying 3.3 to 5V 12V@100mA 90-264 90-264 90-264 180-264 47-63 0.99 typ. @ 230VAC, full load, meets EN61000-3-2 30 Amps peak 88 90 92 93 EN61000-4-2,-3,-4,-5,-6,-8,-11 EN55022, Level B, FCC Class B -40 to 70, derate linearly to 60% load above 50°C -40 to 85 5 to 95 (non-condensing) -200 to 8000 IEC68-2-27, Mil-STD-810E, 20G IEC68-2-64 (random) 20-2000Hz, 30 minutes UL60950, CSA 22.2 No. 60950-00, EN60950, CE Mark 14.25 x 4.00 x 1.69 (stand alone), 16.30 x 17.31 x 1.7 (THR4 Rack) Power Module 6lbs, Rack 9lbs 2 Years 100 120 150 1 Adjustable via i2C or through Lambda Network Interface Card 2 Excludes Xcaps in the EMC input filter 3 Output operates independent of main DC output and is referenced to (-)Vout 4 All three signals share a common return - logic ground 5 Use rack model THR400 3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4 85 TH Series THR4 Rack Outline Drawing * THR400 - AC input via two terminal blocks. TH Module Outline Drawing Models Model TH120012(5) TH120024 TH120048 TH250048(5) THR4 THR400 THRBP THR4NIC THR4NIC12 THR4NIC24 TLCK232 TLRC01 Output Voltage Output Current Maximum Power 12V 100A 1200W 24V 50A 1250W 48V 25A 1250W 48V 50A 2500W 19” Rack holds up to 4 TH Modules; 200A maximum output current. 19” Rack holds up to 4 TH modules; 400A maximum output current. Screw terminal input connection. Blanking panel for one module slot. Network interface card for 48V systems. Network interface card for 12V systems. Network interface card for 24V systems. RS232 Communications kit. Signal cable Alarm Connector Mating Housing Mating Terminal Other Lambda Industrial Products PX, CC-E, PAQ, PAH, PAF FPS1000 86 Molex MicroFit 43025-2000 Molex MicroFit 43030-0002 For Additional Information, please visit us.tdk-lambda.com/lp/products/th-series.htm DC-DC Converters 1U 1kW to 3kW Low Cost Front End 3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4 Revision B3: Oct 2008