TPL802727-472H

I N D U C T O R S March 2018 Transponder coils TPL series TPL802727 (2/7) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. If an ultrasonic process is used, thoroughly check the condition setting in order to prevent disconnection. Do not clean the products with solvents. If a potting resin or a moisture-proof coat containing a solvent such as acetone, toluene or xylene is used, consult with us in advance. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20180306 / transpondercoil_automotive_tpl80_en.fm (3/7) I N D U C T O R S Product compatible with RoHS directive AEC-Q200 Transponder coils Overview of TPL802727 type FEATURES Transponder coils that ensure high reliability suitable for automotive applications. Small size (8 mm in length) and high inductance (18. 52 mH max.) are achieved. Achieves stable electrical characteristics due to their high SRF design structure. Ensures high reliability suitable for automotive applications by adopting higher heat resistance wire and welding wire connection. APPLICATION Mainly receiving LF antenna coils for the in-car devices shown below Tire-pressure monitoring system (TPMS) Keyless entry system Immobilizer etc. Other electronic devices PART NUMBER CONSTRUCTION TPL Series name 802727 L×W×H dimensions (mm) 802727 8.0×2.7×2.7 - 722 H Inductance (mH) 722 7.2 Inductance tolerance (%) H ±3 OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Operating Storage temperature temperature (°C) (°C) TPL802727 –40 to +125 –40 to +125 Operating temperature range includes self-temperature rise. Package quantity Type (pieces/reel) 2,500 RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20180306 / transpondercoil_automotive_tpl80_en.fm (4/7) I N D U C T O R S TPL series TPL802727 type SHAPE & DIMENSIONS 2.7±0.2 2.7 –0.1 +0.3 7.85±0.15 0.8 1.9 Dimensions in mm 2.2 RECOMMENDED LAND PATTERN 5.3 9.5 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20180306 / transpondercoil_automotive_tpl80_en.fm (5/7) I N D U C T O R S TPL series TPL802727 type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L Q (mH) 18.52 7.20 4.91 4.50  Tolerance ±3% ±3% ±3% ±3% min. 40 35 30 30 Measuring frequency (kHz) 125 125 125 125 DC resistance ( ) max. 240 105 85 80 Part No. TPL802727-193H TPL802727-722H TPL802727-492H TPL802727-452H This inductance value is an example of the current commercial product. If a different inductance is needed, please contact us. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20180306 / transpondercoil_automotive_tpl80_en.fm (6/7) I N D U C T O R S TPL series TPL802727 type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH 30 125kHz 722H 25 Inductance (mH) 193H 20 15 10 492H 5 0 10 452H 100 1000 10000 Frequency (kHz) Q FREQUENCY CHARACTERISTICS GRAPH 75 125kHz Q 50 193H 722H 25 492H 452H 0 10 100 1000 10000 Frequency (kHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20180306 / transpondercoil_automotive_tpl80_en.fm (7/7) I N D U C T O R S TPL series Packaging style REEL DIMENSIONS 2.0±0.5 E W1 21.4±1.0 W2 17.4±1.0 P2 2.0±0.1 W 16.0±0.3 N ø100±1.0 E 2 N Type A TPL802727 ø329+0.5/–1.5 (1.0) ø13.0±0.5 W1 ø21.0±0.8 W2 A Dimensions in mm TAPE DIMENSIONS P2 P0 K P1 A B W F E øD0 t Dimensions in mm E 1.75±0.1 F 7.5±0.1 Dimensions in mm Type TPL802727 160min. Drawing direction A 3.0 Taping B 8.1 øD0 1.5+0.1/–0 P0 4.0±0.1 P1 8.0±0.1 K 2.9 t 0.3 200min. 300min. Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20180306 / transpondercoil_automotive_tpl80_en.fm