VFS5045VA031

E M C C o m p o n e n t s Noise suppression filter For home appliances (conductive noise countermeasure) VFS series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free VFS5045 type FEATURES A compact noise suppression component for home appliances that accommodates high currents. High magnetic shield construction achieved by a ferrite magnetic material and compatible with high-density mounting. Operating temperature range: –40 to +105°C (including self-temperature rise) APPLICATION Refrigerators, air conditioners, washing machines, vacuum cleaners, TV PART NUMBER CONSTRUCTION VFS 5045 V A 031 Series name L×W×H dimensions 5.0×5.0×4.5 mm V: at 10MHz S: at 1MHz Internal code Impedance () CHARACTERISTICS SPECIFICATION TABLE Type 5045VA [at 10MHz] 5045SA [at 1MHz] Impedance ( )Typ. 61 142 225 450 1605 180 DC resistance ( )Min. 30 110 150 300 1000 150 Rated current Part No. ( )typ. 0.015 0.022 0.027 0.046 0.110 ( )max. 0.0195 0.0286 0.0351 0.0598 0.143 (A)max. 5.1 4.7 4.2 2.9 1.9 VFS5045VA031 VFS5045VA111 VFS5045VA151 VFS5045VA301 VFS5045VA102 0.240 0.312 1.3 VFS5045SA151 Measurement equipment Measurement item Product No. Impedance 4294A DC resistance 34420A ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Hewlett-Packard Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20200805 suppression-filter_commercial_vfs5045_en.fm E M C C o m p o n e n t s VFS5045 type Z FREQUENCY CHARACTERISTICS 100000 SA151 VA102 VA301 10000 VA151 VA111 Impedance (Ω) 1000 VA031 100 10 1 0.1 0 1 10 100 Frequency (MHz) INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 VA031 Insertion loss (dB) 10 20 30 VA111 VA151 VA301 40 VA102 SA151 50 0.1 1 10 100 Frequency (MHz) Measurement equipment Product No. Manufacturer 4294A Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20200805 suppression-filter_commercial_vfs5045_en.fm E M C C o m p o n e n t s VFS5045 type SHAPE & DIMENSIONS PACKAGING STYLE V031 REEL DIMENSIONS 2.5±0.1 5.0±0.3 3.9±0.2 2.2 4.5max. (2.4) 1.3±0.2 1.3±0.2 ø100 5.0±0.3 Dimensions in mm ø13.2±0.5 13 ø330 Dimensions in mm 1.5 +0.1 –0 K 1.5 2.1 4.0±0.1 Sprocket hole 12.0±0.3 2.0±0.1 B 4.0 0.4 5.5±0.05 RECOMMENDED LAND PATTERN 1.75±0.1 TAPE DIMENSIONS Cavity A 1.5 8.0±0.1 Dimensions in mm Dimensions in mm Type VFS5045 Package quantity Soldering Natural cooling Peak 250°C Temperature 220°C B 5.3 K 4.7 PACKAGE QUANTITY RECOMMENDED REFLOW PROFILE Preheating A 5.3 220°C 1500 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage Individual temperature range temperature range weight –40 to +105 °C –40 to +105 °C 0.46 g  Operating temperature range includes self-temperature rise.  The storage temperature range is for after the assembly. 180°C 5s 150°C 60 to 120s 40s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20200805 suppression-filter_commercial_vfs5045_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20200805 suppression-filter_commercial_vfs5045_en.fm