YFF18AC1C104MT0Y0N

E M C C o m p o n e n t s June 2023 3-terminal filters For automotive general use YFF-AC series YFF15AC YFF18AC YFF21AC 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] * Dimensions Code JIS[EIA] Feed through filter Feed through filter Feed through filter (2/10) E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS 1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (excepting Pharmaceutical Affairs Law classification Class1,2)  (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment    (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability, or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions. 2. We may modify products or discontinue production of a product listed in this catalog without prior notification. 3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly recommend that you exchange these delivery specifications with customers that use one of these products. 4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and Foreign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law. 5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company. 6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you use a product listed in this catalog. We do not grant license of these rights. 7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to products that are purchased through other third parties. 20230616 / 3tf_automotive_general_yff-ac_en.fm (3/10) E M C C o m p o n e n t s 3-terminal filters For automotive general use Overview of the YFF-AC series RoHS REACH Cl Br Pb Halogen Free Lead Free SERIES OVERVIEW YFF-AC series for automotive general use is a surface-mounted component, which has a feed-through structure that direct current passes inside the component. The structure makes a distance to GND short, and a parallel effect of the GND electrodes reduces ESL. FEATURES APPLICATIONS • Reduction in ESR/ESL and impedance due to the feed-through structure • Superior attenuation characteristic in wide bandwidth • Contributes to reduction in the number of decoupling MLCCs • AEC-Q200 compliant SHAPE & DIMENSIONS PRODUCT STRUCTURES MLCC W L • EMC countermeasures and decoupling use in power lines for automotive applications such as ADAS, autonomous driving system ECU YFF series T C B L W T B C Body length Body width Body height Terminal width GND terminal width Sn Ni Cu Internal electrodes are not conducting between terminal electrodes Feed-through structure that direct current passes inside the component Please refer to p-5 and 7 for details of each dimension. RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (4/10) E M C C o m p o n e n t s CATALOG NUMBER CONSTRUCTION YFF 15 AC 0J 105 M T 0Q □ E (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) Series (6) Capacitance tolerance (2) Dimensions L x W (mm) Code M Code 15 18 21 EIA 0402 0603 0805 Length 1.00 1.60 2.00 Width 0.50 0.80 1.25 Terminal width 0.18 0.25 0.30 Tolerance ±20% (7) Packaging style Code T Style Taping (3) Product internal code (8) Internal code Symbol AC Code 0Y 0Q Description For automotive general use Description TDK internal code TDK internal code (4) Rated voltage (DC) Code 0G 0J 1C 1E 1H Voltage (DC) 4V 6.3V 16V 25V 50V (5) Nominal capacitance (pF) The capacitance is expressed in three digit codes and in units of pico Farads (pF). The first and second digits identify the first and second significant figures of the capacitance. The third digit identifies the multiplier. (9) Reel size (mm) Code 0 9 Size ø178 ø330 (10) Internal electrode Code E, N Description Ni (Example)101 = 100pF 222 = 2,200pF 105 = 1,000,000pF = 1.0µF Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (5/10) E M C C o m p o n e n t s YFF-AC series YFF15AC type (Feed through filter) SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN 0.18±0.10 0.19 0.60 1 IN/OUT 0.25 0.25 GND 4 3 OUT/IN Land pattern+Solder resist Land pattern 2 GND 1.00± 0.20 0.30 0.70 Dimensions in mm 0.40±0.10∗ 0.50±0.20∗ 0.30±0.10  Make sure to connect GND terminals of a component and GND of a circuit board by using such as through-holes so that the distance between them becomes the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Insertion loss 40dB bandwidth (MHz) 1 to 2600 1 to 2600 Rated voltage Edc (V) 4 6.3 Rated current Idc (A) 2 2 Operating temperature range (°C) –55 to +125 –55 to +125 Storage temperature range (After mount) (°C) –55 to +125 –55 to +125 Part No. YFF15AC0G105MT0Q0N YFF15AC0J105MT0Q0E Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (6/10) E M C C o m p o n e n t s YFF-AC series YFF15AC type (Feed through filter) INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 10 Insertion loss (dB) 20 30 40 50 60 70 80 90 0.01 0.1 1 10 Frequency (MHz) 100 1000 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (7/10) E M C C o m p o n e n t s YFF-AC series YFF18AC type (Feed through filter) SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN 0.25± 0.20 0.40 0.60 1 IN/OUT 0.400.40 GND 4 3 OUT/IN Land pattern+Solder resist Land pattern 2 GND 1.60± 0.20 0.60 1.00 Dimensions in mm 0.60±0.10∗ 0.80±0.15∗ 0.40± 0.20  Apply 0.80 ± 0.20 to YFF18AC0G475MT0Y0E Make sure to connect GND terminals of a component and GND of a circuit board by using such as through-holes so that the distance between them becomes the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency (MHz) 0.3 0.01 0.1 0.1 0.03 0.1 0.1 0.3 0.3 0.6 0.6 1 1 2 2 6 6 10 10 20 20 60 60 100 100 200 200 Insertion loss 30dB bandwidth (MHz) 0.09 to 1800 0.05 to 3000 0.23 to 3000 0.23 to 3000 0.23 to 3000 2 to 4000 2 to 4000 10 to 3000 10 to 3000 20 to 3000 20 to 3000 40 to 3000 40 to 3000 90 to 3000 90 to 3000 200 to 3000 200 to 3000 400 to 6000 400 to 6000 800 to 6000 800 to 6000 1500 to 6000 1500 to 6000 2000 to 6000 2000 to 6000 4000 to 6000 4000 to 6000 Rated voltage Edc (V) 4 4 6.3 6.3 10 16 16 25 25 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Rated current Idc (A) 4 4 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Operating temperature range (°C) –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 Storage temperature range (After mount) (°C) –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 Part No. YFF18AC0G106MT0YHE YFF18AC0G475MT0Y0E YFF18AC0J105MT0Y0E YFF18AC0J105MT0Y9E YFF18AC1A105MT0Y0E YFF18AC1C104MT0Y0N YFF18AC1C104MT0Y9N YFF18AC1E223MT0Y0N YFF18AC1E223MT0Y9N YFF18AC1H103MT0Y0N YFF18AC1H103MT0Y9N YFF18AC1H472MT0Y0N YFF18AC1H472MT0Y9N YFF18AC1H222MT0Y0N YFF18AC1H222MT0Y9N YFF18AC1H102MT0Y0N YFF18AC1H102MT0Y9N YFF18AC1H471MT0Y0N YFF18AC1H471MT0Y9N YFF18AC1H221MT0Y0N YFF18AC1H221MT0Y9N YFF18AC1H101MT0Y0N YFF18AC1H101MT0Y9N YFF18AC1H470MT0Y0N YFF18AC1H470MT0Y9N YFF18AC1H220MT0Y0N YFF18AC1H220MT0Y9N Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (8/10) E M C C o m p o n e n t s YFF-AC series YFF18AC type (Feed through filter) INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 1H220M 1H102M 10 1H101M Insertion loss (dB) 20 30 40 50 1H222M 1H472M 1H103M 1H471M 1H221M 0J105M, 1A105M 60 0G475M 70 1H470M 1E223M 1C104M 0G106M 80 90 0.01 0.1 1 10 Frequency (MHz) 100 1000 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (9/10) E M C C o m p o n e n t s YFF-AC series YFF21AC type (Feed through filter) SHAPE & DIMENSIONS 0.50+0.30,-0.20 RECOMMENDED LAND PATTERN 0.30± 0.20 0.50 0.60 0.65 3 OUT/IN 1 IN/OUT 0.80 1.25±0.20 GND 4 2 GND 2.00± 0.20 1.40 Dimensions in mm 0.85±0.15 0.60 Land pattern+Solder resist Land pattern * Make sure to connect GND terminals of a component and GND of a circuit board by using such as through-holes so that the distance between them becomes the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency (MHz) 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.5 0.5 1 1 2 2 5 5 10 10 20 20 50 50 100 100 200 200 Insertion loss 30dB bandwidth (MHz) 0.4 to 3000 0.4 to 3000 2 to 2500 2 to 2500 5 to 2000 5 to 2000 10 to 2000 10 to 2000 20 to 2000 20 to 2000 40 to 2000 40 to 2000 70 to 2000 70 to 2000 200 to 2000 200 to 2000 400 to 5000 400 to 5000 700 to 5000 700 to 5000 1000 to 5000 1000 to 5000 2000 to 5000 2000 to 5000 3000 to 5000 3000 to 5000 Rated voltage Edc (V) 16 16 25 25 25 25 25 25 25 25 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Rated current Idc (A) 1 1 1 1 1 1 1 1 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 1 1 1 1 1 1 1 1 1 1 Operating temperature range (°C) –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 Storage temperature range (After mount) (°C) –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 –55 to +125 Part No. YFF21AC1C474MT0Y0N YFF21AC1C474MT0Y9N YFF21AC1E104MT0Y0N YFF21AC1E104MT0Y9N YFF21AC1E473MT0Y0N YFF21AC1E473MT0Y9N YFF21AC1E223MT0Y0N YFF21AC1E223MT0Y9N YFF21AC1E103MT0Y0N YFF21AC1E103MT0Y9N YFF21AC1H472MT0Y0N YFF21AC1H472MT0Y9N YFF21AC1H222MT0Y0N YFF21AC1H222MT0Y9N YFF21AC1H102MT0Y0N YFF21AC1H102MT0Y9N YFF21AC1H471MT0Y0N YFF21AC1H471MT0Y9N YFF21AC1H221MT0Y0N YFF21AC1H221MT0Y9N YFF21AC1H101MT0Y0N YFF21AC1H101MT0Y9N YFF21AC1H470MT0Y0N YFF21AC1H470MT0Y9N YFF21AC1H220MT0Y0N YFF21AC1H220MT0Y9N Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm (10/10) E M C C o m p o n e n t s YFF-AC series YFF21AC type (Feed through filter) INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 10 1H101M 1H220M Insertion loss (dB) 20 1H 10 2M 1H 22 2M 30 40 50 1H470M 1H472M 1H471M1H221M 1E103M 1E223M 1E473M 1E104M 60 70 1C474M 80 90 0.01 0.1 1 10 Frequency (MHz) 100 1000 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20230616 / 3tf_automotive_general_yff-ac_en.fm