E M C
C o m p o n e n t s
January 2019
3-terminal filters
For automotive general use
YFF-AC series
YFF18AC
YFF21AC
1608 [0603 inch]
2012 [0805 inch]
* Dimensions Code JIS[EIA]
Feed through filter
Feed through filter
(2/8)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society,
person or property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications
below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the
applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please
contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
In addition, although the products listed in this specification are intended for use in automotive applications as described above, they
are not prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of
safety or reliability, or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore,
the description of this caution will be applied, when the products are used in general electronic equipment under a normal operation
and usage conditions.
2. We may modify products or discontinue production of a product listed in this catalog without prior notification.
3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We
strongly recommend that you exchange these delivery specifications with customers that use one of these products.
4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange
and Foreign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party
when you use a product listed in this catalog. We do not grant license of these rights.
7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not
apply to products that are purchased through other third parties.
20190115 / 3tf_automotive_general_yff-ac_en.fm
(3/8)
E M C
C o m p o n e n t s
3-terminal filters
For automotive general use
Overview of the YFF-AC series
RoHS
REACH
SVHC-Free
Cl
Br
Pb
Halogen
Free
Lead
Free
SERIES OVERVIEW
TDK 3-terminal feed through filter_YFF-AC series is a product which has feed through structure that the direct current goes through inside the component. This structure makes the distance from the product to GND shorter and reduces the ESL. Parallel effect by GND electrodes at both sides
provides low ESL.
FEATURES
APPLICATIONS
• Small and high-performance EMC components for automotive applications. And good attenuation characteristic in wide bandwidth.
• Very effective for the decoupling use. The number of decoupling
MLCCs can be decreased because the impedance is lower than 2-terminal MLCC.
• AEC-Q200 compliant.
SHAPE & DIMENSIONS
PRODUCT STRUCTURE
W
L
• EMC countermeasure and decoupling use in power lines for automotive applications such as ADAS, Autonomous driving system, ECUs,
etc.
T
C
B
L
W
T
B
C
Body length
Body width
Body height
Terminal width
GND terminal width
Sn
Ni
Cu
The feed through structure that the direct current goes through inside the
component. This structure makes the distance from the product to GND
shorter and reduces the ESL. Parallel effect by GND electrodes at both
See P-5 to P-6 for details of each dimension.
RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_general_yff-ac_en.fm
(4/8)
E M C
C o m p o n e n t s
CATALOG NUMBER CONSTRUCTION
YFF
18
AC
0J
105
M
T
0Y
□
E
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Series
(6) Capacitance tolerance
(2) Dimensions L x W (mm)
Code
18
21
EIA
0603
0805
Length
1.60
2.00
Width
0.80
1.25
Terminal width
0.25
0.30
Code
M
Tolerance
±20%
(7) Packaging style
(3) Product internal code
Code
T
Symbol
AC
(8) Internal code
Description
For automotive general use
(4) Rated voltage (DC)
Code
0J
1C
1E
1H
Voltage (DC)
6.3V
16V
25V
50V
(5) Nominal capacitance (pF)
The capacitance is expressed in three digit codes and in units of
pico Farads (pF). The first and second digits identify the first and
second significant figures of the capacitance. The third digit identifies the multiplier.
Code
0Y
Style
Taping
Description
TDK internal code
(9) Reel size (mm)
Code
0
9
Size
ø178
ø330
(10) Internal electrode
Code
E, N
Description
Ni
(Example)101 = 100pF
222 = 2,200pF
105 = 1,000,000pF = 1.0µF
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_general_yff-ac_en.fm
(5/8)
E M C
C o m p o n e n t s
YFF-AC series
YFF18AC type (Feed through filter)
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.25± 0.20
0.40
0.60
1
IN/OUT
0.400.40
GND
4
3
OUT/IN
Land pattern+Solder resist
Land pattern
2
GND
1.60± 0.20
0.60
1.00
Dimensions in mm
0.60±0.10
0.80±0.15
0.40± 0.20
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Cutoff
frequency
(MHz)
0.1
0.1
0.1
0.1
0.3
0.3
0.6
0.6
1
1
2
2
6
6
10
10
20
20
60
60
100
100
200
200
Insertion loss
30dB bandwidth
(MHz)
0.23 to 3000
0.23 to 3000
2
to 4000
2
to 4000
10
to 3000
10
to 3000
20
to 3000
20
to 3000
40
to 3000
40
to 3000
90
to 3000
90
to 3000
200
to 3000
200
to 3000
400
to 6000
400
to 6000
800
to 6000
800
to 6000
1500
to 6000
1500
to 6000
2000
to 6000
2000
to 6000
4000
to 6000
4000
to 6000
Rated voltage
Edc
(V)
6.3
6.3
16
16
25
25
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Rated current
Idc
(A)
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Operating
temperature range
(°C)
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
Storage temperature
range (After mount)
(°C)
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
Part No.
YFF18AC0J105MT0Y0E
YFF18AC0J105MT0Y9E
YFF18AC1C104MT0Y0N
YFF18AC1C104MT0Y9N
YFF18AC1E223MT0Y0N
YFF18AC1E223MT0Y9N
YFF18AC1H103MT0Y0N
YFF18AC1H103MT0Y9N
YFF18AC1H472MT0Y0N
YFF18AC1H472MT0Y9N
YFF18AC1H222MT0Y0N
YFF18AC1H222MT0Y9N
YFF18AC1H102MT0Y0N
YFF18AC1H102MT0Y9N
YFF18AC1H471MT0Y0N
YFF18AC1H471MT0Y9N
YFF18AC1H221MT0Y0N
YFF18AC1H221MT0Y9N
YFF18AC1H101MT0Y0N
YFF18AC1H101MT0Y9N
YFF18AC1H470MT0Y0N
YFF18AC1H470MT0Y9N
YFF18AC1H220MT0Y0N
YFF18AC1H220MT0Y9N
The part numbers are TDK’s standard specification products.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_general_yff-ac_en.fm
(6/8)
E M C
C o m p o n e n t s
YFF-AC series
YFF18AC type (Feed through filter)
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
10
Insertion loss (dB)
20
30
40
1H
47
2M
1H
1
1H 02M
22
2M
50
1H471M
60
1H103M
1H220M
1H101M 1H470M
1H221M
1E223M
70
1C104M
0J105M
80
90
0.1
1
10
100
1000
10000
Frequency (MHz)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_general_yff-ac_en.fm
(7/8)
E M C
C o m p o n e n t s
YFF-AC series
YFF21AC type (Feed through filter)
SHAPE & DIMENSIONS
0.50+0.30,-0.20
RECOMMENDED LAND PATTERN
0.30± 0.20
0.50
0.60 0.65
3
OUT/IN
1
IN/OUT
0.80
1.25±0.20
GND
4
2
GND
2.00± 0.20
1.40
Dimensions in mm
0.85±0.15
0.60
Land pattern+Solder resist
Land pattern
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Cutoff
frequency
(MHz)
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.5
0.5
1
1
2
2
5
5
10
10
20
20
50
50
100
100
200
200
Insertion loss
30dB bandwidth
(MHz)
0.4 to 3000
0.4 to 3000
2 to 2500
2 to 2500
5 to 2000
5 to 2000
10 to 2000
10 to 2000
20 to 2000
20 to 2000
40 to 2000
40 to 2000
70 to 2000
70 to 2000
200 to 2000
200 to 2000
400 to 5000
400 to 5000
700 to 5000
700 to 5000
1000 to 5000
1000 to 5000
2000 to 5000
2000 to 5000
3000 to 5000
3000 to 5000
Rated voltage
Edc
(V)
16
16
25
25
25
25
25
25
25
25
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Rated current
Idc
(A)
1
1
1
1
1
1
1
1
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
1
1
1
1
1
1
1
1
1
1
Operating
temperature range
(°C)
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
Storage temperature
range (After mount)
(°C)
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
Part No.
YFF21AC1C474MT0Y0N
YFF21AC1C474MT0Y9N
YFF21AC1E104MT0Y0N
YFF21AC1E104MT0Y9N
YFF21AC1E473MT0Y0N
YFF21AC1E473MT0Y9N
YFF21AC1E223MT0Y0N
YFF21AC1E223MT0Y9N
YFF21AC1E103MT0Y0N
YFF21AC1E103MT0Y9N
YFF21AC1H472MT0Y0N
YFF21AC1H472MT0Y9N
YFF21AC1H222MT0Y0N
YFF21AC1H222MT0Y9N
YFF21AC1H102MT0Y0N
YFF21AC1H102MT0Y9N
YFF21AC1H471MT0Y0N
YFF21AC1H471MT0Y9N
YFF21AC1H221MT0Y0N
YFF21AC1H221MT0Y9N
YFF21AC1H101MT0Y0N
YFF21AC1H101MT0Y9N
YFF21AC1H470MT0Y0N
YFF21AC1H470MT0Y9N
YFF21AC1H220MT0Y0N
YFF21AC1H220MT0Y9N
The part numbers are TDK’s standard specification products.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_general_yff-ac_en.fm
(8/8)
E M C
C o m p o n e n t s
YFF-AC series
YFF21AC type (Feed through filter)
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
10
Insertion loss (dB)
20
30
40
1H102M
1H220M
1H470M
1H222M
1H101M
1H472M 1H471M 1H221M
1E103M
1E223M
1E473M
1E104M
1C474M
50
60
70
80
90
0.1
1
10
100
1000
10000
Frequency (MHz)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190115 / 3tf_automotive_general_yff-ac_en.fm
很抱歉,暂时无法提供与“YFF18AC1H103MT0Y0N”相匹配的价格&库存,您可以联系我们找货
免费人工找货