YFF18SC1H101MT0H0N

E M C C o m p o n e n t s July 2015 3-terminal Filters For Signal Line YFF-SC Series YFF15SC YFF18SC YFF21SC 1005 [0402 inch]* Feed through filter 1608 [0603 inch] Feed through filter 2012 [0805 inch] Feed through filter * Dimensions Code JIS[EIA] (1/6) E M C C o m p o n e n t s 3-terminal Filters Conformity to RoHS Directive Compatible with lead-free solders For Signal Line Overview of YFF-SC Series FEATURES Small and high-performance EMC components. Good attenuation characteristic in high frequency ranges. APPLICATIONS High impedance circuits, e.g. digital signal circuits. I/O interface sections of devices with electric circuits and the area around connectors. Low-current power line of communication terminal devices, AV, and information devices. PART NUMBER IDENTIFICATION YFF Series name 21 SC 1E L×W dimensions Code mm 15 1.0×0.5 18 1.6×0.8 21 2.0×1.2 Product internal code SC Signal line Rated voltage Code V 1C 16 1E 25 1H 50 473 Capacitance Code 220 101 221 473 pF 22 100 220 47,000 (47nF) M T Tolerance Taping M ±20％ 0 TDK internal code N Reel size Code 0 9 mm ø178 ø330 Internal electrode Ni OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Type YFF15SC YFF18SC YFF21SC Package quantity (piece/reel) ø178 ø330 10,000 50,000 4,000 10,000 4,000 10,000 Individual weight （g） 0.0008 0.0038 0.0095 The Storage temperature range is for after the circuit board is mounted. Conformity to RoHS Directive: This means that, in conformity with EU Directive 2011/65/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Please contact our Sales office when your application is considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150721 / emc_esr_yff-sc_en.fm (2/6) E M C C o m p o n e n t s Overview of YFF-SC Series RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING Soldering Preheating Slow cooling (Natural cooling) 150˚C max. Temperature(˚C) 260˚C max. 0 60 seconds or more 10s max. HAND SOLDERING PRECAUTIONS FOR USE Before soldering, be sure to preheat components. The 'T preheating temperature must be 150°C max. with attention paid to thermal shock. Natural cooling of components in the air is recommended. On the other hand, when dipping them in a solvent for purposes, such as cleaning, make sure that the temperature difference ('T) is 100° When performing hand soldering for circuit modification, apply the soldering iron to the copper foil area of the printed circuit board for 3 seconds or less. The temperature of the iron tip should not exceed 300°C. Use a wrist band to discharge static electricity in your body through the grounding wire. When incorporating the printed circuit board on which this product is mounted into a frame, etc., do not apply stress to the product through local bending of the board by tightening of screws, etc. 0 150˚C max. Temperature(˚C) 300 Preheating Make as short as possilble (within three seconds) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150721 / emc_esr_yff-sc_en.fm (3/6) E M C C o m p o n e n t s YFF-SC Series YFF15SC Type (Feed Through Filter) 0.09min. 0.19 3 OUT/IN 0.30 0.70 Land pattern+Solder resist Land pattern 0.25 1 IN/OUT 0.60 GND 4 Dimensions in mm 2 GND 1.00± 0.05 0.30±0.05 0.55±0.05 0.30± 0.10 RECOMMENDED LAND PATTERN 0.25 SHAPES AND DIMENSIONS * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency (MHz) 0.1 0.3 0.6 1 3 6 10 30 60 100 300 Insertion loss 30dB bandwidth (MHz) 5 to 4000 10 to 4000 20 to 4000 50 to 4000 100 to 4000 200 to 4000 600 to 4000 800 to 6000 1500 to 6000 2000 to 6000 4000 to 6000 Rated voltage Edc (V) 16 16 25 25 25 25 25 50 50 50 50 Rated current Idc (A) 1 1 1 1 1 1 1 1 1 1 1 Operating temperature range (°C) –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 Storage temperature range(After mount) (°C) –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 Part No. YFF15SC1C473MT00 □ N YFF15SC1C223MT00 □ N YFF15SC1E103MT00 □ N YFF15SC1E472MT00 □ N YFF15SC1E222MT00 □ N YFF15SC1E102MT00 □ N YFF15SC1E471MT00 □ N YFF15SC1H221MT00 □ N YFF15SC1H101MT00 □ N YFF15SC1H470MT00 □ N YFF15SC1H220MT00 □ N The part numbers are TDK’s standard specification products. : Please specify reel size code, 0 (ø178) or 9 (ø330) ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 0 10 1H220 Insertion loss (dB) 20 30 1E471 40 50 1E102 1E472 1E222 60 1C473 1E103 1H221 1C223 1H470 1H101 70 80 90 0.1 1 10 100 1000 10000 Frequency (MHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150721 / emc_esr_yff-sc_en.fm (4/6) E M C C o m p o n e n t s YFF-SC Series YFF18SC Type (Feed Through Filter) SHAPES AND DIMENSIONS 0.10min. 0.40 1 IN/OUT 0.400.40 GND 4 0.60 0.80±0.10 0.40± 0.10 RECOMMENDED LAND PATTERN 3 OUT/IN Land pattern+Solder resist Land pattern 2 GND 1.60± 0.10 1.00 Dimensions in mm 0.60±0.10 0.60 * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency (MHz) 0.3 0.6 1 2 6 10 20 60 100 200 Insertion loss 30dB bandwidth (MHz) 10 to 3000 20 to 3000 40 to 3000 90 to 3000 200 to 3000 400 to 6000 800 to 6000 1500 to 6000 2000 to 6000 4000 to 6000 Rated voltage Edc (V) 50 50 50 50 50 50 50 50 50 50 Rated current Idc (A) 1 1 1 1 1 1 1 1 1 1 Operating temperature range (°C) –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 Storage temperature range(After mount) (°C) –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 Part No. YFF18SC1H223MT0H □ N YFF18SC1H103MT0H □ N YFF18SC1H472MT0H □ N YFF18SC1H222MT0H □ N YFF18SC1H102MT0H □ N YFF18SC1H471MT0H □ N YFF18SC1H221MT0H □ N YFF18SC1H101MT0H □ N YFF18SC1H470MT0H □ N YFF18SC1H220MT0H □ N The part numbers are TDK’s standard specification products. : Please specify reel size code, 0 (ø178) or 9 (ø330) ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 0 10 Insertion loss (dB) 20 30 40 1H102 50 1H220 60 1H223 1H222 1H470 1H101 1H472 1H221 1H103 1H471 70 80 90 0.1 1 10 100 1000 10000 Frequency (MHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150721 / emc_esr_yff-sc_en.fm (5/6) E M C C o m p o n e n t s YFF-SC Series YFF21SC Type (Feed Through Filter) SHAPES AND DIMENSIONS 0.45± 0.15 RECOMMENDED LAND PATTERN 0.20min. 0.50 0.60 0.65 3 OUT/IN 1 IN/OUT 0.80 1.25±0.20 GND 4 2 GND 2.00± 0.20 1.40 Dimensions in mm 0.85±0.15 0.60 Land pattern+Solder resist Land pattern * Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between them is the shortest. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Cutoff frequency (MHz) 0.1 0.1 0.2 0.2 0.5 1 2 5 10 20 50 100 200 Insertion loss 30dB bandwidth (MHz) 5 to 2000 5 to 2000 10 to 2000 10 to 2000 20 to 2000 40 to 2000 70 to 2000 200 to 2000 400 to 5000 700 to 5000 1000 to 5000 2000 to 5000 3000 to 5000 Rated voltage Edc (V) 50 25 50 25 25 50 50 50 50 50 50 50 50 Rated current Idc (A) 2 2 2 2 1 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Operating temperature range (°C) –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 Storage temperature range(After mount) (°C) –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 –55 to 125 Part No. YFF21SC1H473MT00 □ N YFF21SC1E473MT00 □ N YFF21SC1H223MT00 □ N YFF21SC1E223MT00 □ N YFF21SC1E103MT00 □ N YFF21SC1H472MT00 □ N YFF21SC1H222MT00 □ N YFF21SC1H102MT00 □ N YFF21SC1H471MT00 □ N YFF21SC1H221MT00 □ N YFF21SC1H101MT00 □ N YFF21SC1H470MT00 □ N YFF21SC1H220MT00 □ N The part numbers are TDK’s standard specification products. : Please specify reel size code, 0 (ø178) or 9 (ø330) ELECTRICAL CHARACTERISTICS GRAPH INSERTION LOSS vs. FREQUENCY CHARACTERISTICS 0 10 1H220 Insertion loss (dB) 20 30 40 1H102 50 60 1E103 1E473, 1H473 1H470 1H222 1H101 1H472 1H471 1H221 1E223, 1H223 70 80 90 0.1 1 10 100 1000 10000 Frequency (MHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150721 / emc_esr_yff-sc_en.fm (6/6) E M C C o m p o n e n t s YFF-SC Series Packing Style REEL DIMENSIONS C B E r W D t A Dimensions in mm Reel ø178 ø330 A ø178±2.0 ø382 max.(ø330 nom.) B ø60±2.0 ø50 min. C ø13±0.5 ø13±0.5 D ø21±0.8 ø21±0.8 E 2.0±0.5 2.0±0.5 W 9.0±0.3 10.0±1.5 t 2.0±0.5 2.0±0.5 r 1.0 1.0 TAPE DIMENSIONS Paper tape J Square punch hole for component mounting D B C E Round sprocket holes t A H G F Dimensions in mm Type YFF15SC YFF18SC YFF21SC A 0.62 typ. 1.10 typ. 1.50 typ. B 1.12 typ. 1.90 typ. 2.3 typ. C 8.0±0.3 8.0±0.3 8.0±0.3 D 3.5±0.05 3.5±0.05 3.5±0.05 E 1.75±0.1 1.75±0.1 1.75±0.1 F 2.0±0.05 4.0±0.1 4.0±0.1 G 2.0±0.05 2.0±0.05 2.0±0.05 H 4.0±0.1 4.0±0.1 4.0±0.1 J ø1.5+0.1/–0 ø1.5+0.1/–0 ø1.5+0.1/–0 t 0.7 max. 1.1 max. 1.1 max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150721 / emc_esr_yff-sc_en.fm