YNA21B2J0G106M

E M C C o m p o n e n t s October 2015 Noise Absorber Controlled ESR Type YNA series YNA15 YNA18 YNA21 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] * Dimensions Code JIS[EIA] (1/6) E M C C o m p o n e n t s Noise Absorber Conformity to RoHS Directive Lead-free Compatible Controlled ESR Type Overview of YNA Series FEATURES The special laminated interior structure means ESR values can be controlled. An impedance waveform with no pole means anti-resonance is controlled. Without decreasing power efficiency, EMI measures can be taken. APPLICATIONS Countermeasures against ringing of switching power supply for smart phones, tablet PCs, etc. Countermeasures against anti-resonance of impedance inside a decoupling circuit PART NUMBER IDENTIFICATION YNA Series name 15 B 1J L×W Dimensions (mm) 15 1.0×0.5 18 1.6×0.8 21 2.0×1.2 Product internal code ESR value 2-terminal B (with NC terminal) (NC: Not Connected) 0G Rated voltage (V) 0G 4 105 Capacitance (pF) 1,000.000 105 (1.0μF) 10,000,000 106 (10μF) M T Tolerance Taping M ±20％ 0 TDK internal code Reel size 0 9 (mm) ø178 ø330 N Internal electrode Ni * An ESR value is shown in two characters with a m: unit. The first digit is the multiplier of the ESR value: 1: 10, 2: 100, and 3: 1000. The second digit shows the significant figure of the ESR value. A: 1.0, B: 1.5, C: 2.0, D: 2.5, E: 3.0, F: 3.5, G: 4.0, H: 4.5, J: 5.0, K: 5.5, L: 6.0, M: 6.5, N: 7.0, P: 7.5, Q: 8.0, R: 8.5, S: 9.0, T: 9.5, U: 1.2 SPECIFICATIONS Type YNA15 YNA18 YNA21 Specifications Operating temperature Storage temperature range range(After mount) –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85 –55 to +85 PACKAGING STYLE AND SPECIFICATIONS Type YNA15 YNA18 YNA21 Package quantity (piece/reel) ø178 ø330 10,000 50,000 4,000 10,000 4,000 10,000 Single weight (g) 0.0008 0.0051 0.0095 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Please contact our Sales office when your application is considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20151028 / emc_esr_yna_en.fm (2/6) E M C C o m p o n e n t s Overview of YNA Series RECOMMENDED SOLDERING CONDITION PRECAUTIONS FOR USE REFLOW SOLDERING Before soldering, be sure to preheat components. The 'T preheating temperature must be 150°C max. with attention paid to thermal shock. Natural cooling of components in the air is recommended. On the other hand, when dipping them in a solvent for purposes, such as cleaning, make sure that the temperature difference ('T) is 100° When performing hand soldering for circuit modification, apply the soldering iron to the copper foil area of the printed circuit board for 3 seconds or less. The temperature of the iron tip should not exceed 300°C. Use a wrist band to discharge static electricity in your body through the grounding wire. When incorporating the printed circuit board on which this prod- Soldering Preheating Slow cooling (Natural cooling) 150˚C max. Temperature(˚C) 260˚C max. 0 60 seconds or more 10s max. HAND SOLDERING uct is mounted into a frame, etc., do not apply stress to the product through local bending of the board by tightening of screws, etc. 0 150˚C max. Temperature(˚C) 300 Preheating Make as short as possilble (within three seconds) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20151028 / emc_esr_yna_en.fm (3/6) E M C C o m p o n e n t s YNA Series YNA15 Type SHAPES AND DIMENSIONS 0.5 0.17± 0.10 0.55±0.05 0.10min. RECOMMENDED LAND PATTERN 0.35 0.70 Dimensions in mm The lateral terminals are not connected. 0.30±0.05 1.00± 0.05 ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. YNA15B1J0G105MT00 YNA15B2A0G105MT00 YNA15B2C0G105MT00 YNA15B2J0G105MT00 YNA15B3A0G105MT00 * N N N N N Capacitance (μF) Tolerance (%) 1 1 1 1 1 20 20 20 20 20 Rated voltage Edc (V) 4 4 4 4 4 ESR (m:) 50 (±30%) 100 (±30%) 200 (±30%) 500 (±30%) 1000 (±30%) Any ESR value can be set if it is the same as or smaller than the maximum ESR value. Contact us if you need an ESR value other than ones shown in the table. : Please specify reel size code, 0 (ø178) or 9 (ø330) ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) IMPEDANCE vs. FREQUENCY CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS 10 0 YNA15B3A0G105M 10 Insertion loss(dB) Impedance(Ω) 1 0.1 YNA15B1J0G105M 0.01 20 YNA15B3A0G105M 30 40 50 0.001 0.01 YNA15B1J0G105M 0.1 1 10 100 Frequency (MHz) 1000 10000 60 0.01 0.1 1 10 100 Frequency (MHz) 1000 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20151028 / emc_esr_yna_en.fm (4/6) E M C C o m p o n e n t s YNA Series YNA18 Type SHAPES AND DIMENSIONS 0.25± 0.15 0.80±0.10 0.8 0.20min. RECOMMENDED LAND PATTERN 0.5 1.1 Dimensions in mm 1.60± 0.20 0.80±0.10 The lateral terminals are not connected. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. Capacitance (μF) Tolerance (%) YNA18B1J0G105MT00 N YNA18B2A0G105MT00 N YNA18B2C0G105MT00 N YNA18B2J0G105MT00 N YNA18B3U0G105MT00 N 1 1 1 1 1 20 20 20 20 20 Rated voltage Edc (V) 4 4 4 4 4 ESR (m:) 50 (±30%) 100 (±30%) 200 (±30%) 500 (±30%) 1200 (±30%) Any ESR value can be set if it is the same as or smaller than the maximum ESR value. Contact us if you need an ESR value other than ones shown in the table. * : Please specify reel size code, 0 (ø178) or 9 (ø330) ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) IMPEDANCE vs. FREQUENCY CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS 10 0 YNA18B3U0G105M 10 0.1 Insertion loss(dB) Impedance(Ω) 1 YNA18B2C0G105M 0.01 20 30 40 50 0.001 0.01 0.1 1 10 100 Frequency (MHz) 1000 10000 YNA18B3U0G105M 60 0.01 YNA18B2C0G105M 0.1 1 10 100 Frequency (MHz) 1000 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20151028 / emc_esr_yna_en.fm (5/6) E M C C o m p o n e n t s YNA Series YNA21 Type SHAPES AND DIMENSIONS 0.30± 0.15 1.25±0.20 1.3 0.30min. RECOMMENDED LAND PATTERN 0.7 2.00± 0.20 1.3 Dimensions in mm 0.85±0.15 The lateral terminals are not connected. ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. Capacitance (μF) Tolerance (%) YNA21B1J0G106MT00 N YNA21B2A0G106MT00 N YNA21B2C0G106MT00 N YNA21B2J0G106MT00 N 10 10 10 10 20 20 20 20 Rated voltage Edc (V) 4 4 4 4 ESR (m:) 50 (±30%) 100 (±30%) 200 (±30%) 500 (±30%) Any ESR value can be set if it is the same as or smaller than the maximum ESR value. Contact us if you need an ESR value other than ones shown in the table. * : Please specify reel size code, 0 (ø178) or 9 (ø330) ELECTRICAL CHARACTERISTICS GRAPH (EXAMPLE) IMPEDANCE vs. FREQUENCY CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS 10 0 Insertion loss(dB) Impedance(Ω) 10 YNA21B2J0G106M 1 0.1 0.01 0.001 0.01 YNA21B1J0G106M 0.1 10 Frequency (MHz) 20 YNA21B2J0G106M 30 40 50 1000 60 0.01 YNA21B1J0G106M 0.1 1 10 100 Frequency (MHz) 1000 10000 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20151028 / emc_esr_yna_en.fm (6/6) E M C C o m p o n e n t s YNA series Packaging Style REEL DIMENSIONS C B E r W D t A Dimensions in mm Reel ø178 ø330 A ø178±2.0 ø382 max.(ø330 nom.) B ø60±2.0 ø50 min. C ø13±0.5 ø13±0.5 D ø21±0.8 ø21±0.8 E 2.0±0.5 2.0±0.5 W 9.0±0.3 10.0±1.5 t 2.0±0.5 2.0±0.5 r 1.0 1.0 H 4.00±0.10 4.00±0.10 4.00±0.10 J ø1.50+0.10/–0 ø1.50+0.10/–0 ø1.50+0.10/–0 TAPE DIMENSIONS J Square punch hole for component mounting D B C E Round sprocket holes t A Type YNA15 YNA18 YNA21 A 0.65 typ. 1.10 typ. 1.50 typ. H G F Dimensions in mm B 1.15 typ. 1.90 typ. 2.30 typ. C 8.00±0.30 8.00±0.30 8.00±0.30 D 3.50±0.05 3.50±0.05 3.50±0.05 E 1.75±0.10 1.75±0.10 1.75±0.10 F 2.00±0.05 4.00±0.10 4.00±0.10 G 2.00±0.05 2.00±0.05 2.00±0.05 t 0.70 max. 1.20 max. 1.20 max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20151028 / emc_esr_yna_en.fm