SPECIFICATIONS
HDMI
Version
Standard Formats
Connector
Protocol
Video Colorimetry
Video Max Pixel Rate
Color Depths
Video Encoding / Sampling
HDCP
Audio Formats
Audio LPCM Settings
HDMI 2.0
VESA (DMT, CVT-R, CVT), CEA
(1) Type A Tx; (1) Type A Rx
HDMI, DVI
ITU-R BT.601-5, ITU-R BT.709-5
300 MHz (300 Gbps/channel TMDS rate)
8, 10, 12 bits
RGB, YCbCr; 4:4:4, 4:2:2, 4:2:0
Versions 1.4 & 2.2
LPCM, Dolby (DD, DD+, TrueHD), DTS (ES, HD, Master Audio)
Sampling rates (32 – 192 kHz); Bits per sample (16, 20, 24)
quantumdata™ 780AH
Handheld Test Instrument
with 297MHz for 4K Testing
Digital Audio
Connectors
Audio Formats
Audio LPCM Settings
Optical (JIS FOS); SPDIF (RCA)
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Sampling rates (32 – 192 kHz); Bits per sample (16, 20, 24)
Key Features
Analog Video
Connector
Format Standards
Video Encoding
Max Pixel Rate
VGA HD-15
VESA, CEA
RGB, YPbPr
80 MHz (higher resolutions supported through pixel repetition)
Options
Cable Test
Netwrok Analyzer
ACA Monitor (emulation)
ACA Monitor (passive)
Report File Creation NEW!
Test digital video cables and video distribution networks
Protocol testing of sources and sinks
Monitor aux channel and CEC bus while emulating a source or sink device
Monitor aux channel and CEC bus passively between source and sink devices
Provides HTML formatted report of tests performed
Instrument
Battery
AC Adapter
Weight
Embedded Display
Tilt Bail
Size
Command Line Control
Environmental
File Access
6AA NiMh batteries. 2 hours between charge. Overnight charge required.
100-120 VAC, 47-63Hz; 0.4 amps max
3.25 LBS; 1.47 Kg
480 (H); x 272 (V) resolution; 24 bit RGB color.
For convenient viewing
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
USB Type B
Operating Temp: 32 to 104 (F); 0 to 40 (C)
USB Type B (command line / file transfer; SD Card (upgrades / file transfer)
HDMI input and output ports for
testing both source display devices
as well as cables and distribution
networks
Teledyne LeCroy’s quantumdata 780AH Handheld Test Instrument is a
battery powered portable, handheld digital video generator and
analyzer that enables you to run tests on digital video devices and
network distribution devices on site or in the R&D lab. The HDMI ports
support testing up to 300 MHz pixel rate. Testing these HDMI devices
Test Ultra High Definition video
products supporting 4K resolutions
up to 300 MHz
is supported by both an output port and an input port to allow testing of
Video pattern and format library
with programmable settings
analog.
Diagnose and Troubleshoot
Ease of Use
Protocol tests for digital video
sources and displays, including
test for HDCP 2.2 authentication
The 780AH model provide a status bar
The 780AH’s color touch screen
on the bottom of the touch screen. The
provides ease of use. The rich set of
status bar provides basic information
routine tests and diagnostic tests are
about what the instrument is
accessible with just a few touch
transmitting to a display. The
clicks. You can quickly configure
instruments can run quick video audio
settings on the outputs. A rich
and protocol tests on individual sources,
command set, available either through
displays , repeaters, distribution gear as
USB or RS-232 serial ports, supports
well as cables. Protocol tests include
automated testing.
Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of
EDID exchanges, SCDC, HDCP
(including HDCP 2.2) transactions
and CEC messages
Passive protocol logging between a
source and a sink is also optionally
supported on HDMI ports
NEW! Report File Creation feature
provides HTML formatted report of
tests performed
HDMI video sources, displays, audio devices and distribution devices.
The 780AH also offers a VGA output for testing RGB and component
tests for EDID, HDCP authentication,
infoframes and timing data. You can
place the 780AH at any point in a video
distribution network and run tests
upstream toward the source while
emulating a display (or sink). Or you
can run tests downstream while
emulating a source. Generate reports to
demonstrate test series completion.
1-800-909-7211
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
©2016 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
v0913
SOURCE & NETWORK DIAGNOSTIC TEST FEATURES
View Incoming Video & Data
Test Response to EDIDs
The Video Display Test shows the
incoming video and essential video
and audio meta-data. Both provide
quick time-to-insight when
conducting routine tests or
diagnosing interoperability problems.
Many interoperability problems are
related to EDIDs. 780AH enables you
to emulate any EDID to test a source’s
response. You can use commercial
EDIDs or test EDIDs with specific video
and audio support. Test with EDIDs
with known anomalies or grab an EDID
from an HD TV and save it for future
testing.
View Auxiliary Channel
Transactions
Complex interoperability problems
require visibility into the auxiliary
channel. You can monitor HDMI and
HDBaseT Display Data Channel data
to view EDID, SCDC, HDCP and CEC
transactions. You can check details
of each transaction in the log and
distribute the logs to colleagues and
subject matter experts.
Video Display Test – View video & metadata
SINK (DISPLAY) TEST & DIAGNOSTIC FEATURES
Verify EDID Contents
Select from CEA and VESA formats
or create your own custom formats
including 4K resolutions for Ultra HD
testing up to 300 MHz. Use the test
pattern library to verify specific
video display elements. Set bit
depth, pixel encoding, colorimetry
and sampling parameters. Use
industry standard patterns for color
calibration. Create custom bitmap
test patterns. Scroll bitmaps to test
motion artifacts.
Many interoperability problems are
related to EDIDs. You can view the EDID
contents of any connected display to
verify its audio/video capabilities
(including HDR elements). You can
verify the structure of an EDID and
check for compliance.
Video Test – Select formats & parameters
HDMI/HDBaseT
Extender Pair
HDMI Switch
You can use the 780AH to verify
audio on displays or audio systems
using programmable LPCM test
tones. Set sampling rate, bit depth,
amplitude and number of channels.
You can select Dolby and DTS
compressed audio clips including
Dolby TrueHD & DTS Master Audio.
Audio Test
Select compressed or LPCM tones
780AH
emulating
display
HDMI Source
Verify Audio
Verify Video
HDMI A/V Rx
Format Analyzer – View metadata & timing
780AH
emulating
source
HDMI UHD TV
EDID Verification Test
HDMI/HDBaseT
Extender Pair
Example Source Test Setup
Verify Cable / Network (Loop)
Verify Video at Far End
The 780AH enables you to test
distribution equipment to verify
integrity of extenders, matrix switches
and distribution amps. You can test
individual devices or entire networks
including digital video cables.
The 780AH supports testing of
installed distribution networks
from the far-end at the display.
HDMI Switch
Cable Test - Verify networks and cables
HDMI A/V Rx
HDMI/HDBaseT
Extender Pair
HDMI Switch
Example Network Test Setup
Sink (Display) Test Setup
Verify HDCP Authentication
780AH
emulating
source &
display
Verify distribution network from far end
HDMI A/V Rx
HDCP authentication problems
occur in complex digital video
distribution networks. Use the
HDCP test to quickly check HDCP
1.4 and HDCP 2.2 authentication.
Enabling and disabling HDCP can
quickly reveal the nature of an
interoperability problem. Monitor
the HDCP transactions during the
HDCP test using the Aux Channel
Analyzer.
Aux Channel Analyzer
HDCP Authentication Test
SOURCE & NETWORK DIAGNOSTIC TEST FEATURES
View Incoming Video & Data
Test Response to EDIDs
The Video Display Test shows the
incoming video and essential video
and audio meta-data. Both provide
quick time-to-insight when
conducting routine tests or
diagnosing interoperability problems.
Many interoperability problems are
related to EDIDs. 780AH enables you
to emulate any EDID to test a source’s
response. You can use commercial
EDIDs or test EDIDs with specific video
and audio support. Test with EDIDs
with known anomalies or grab an EDID
from an HD TV and save it for future
testing.
View Auxiliary Channel
Transactions
Complex interoperability problems
require visibility into the auxiliary
channel. You can monitor HDMI and
HDBaseT Display Data Channel data
to view EDID, SCDC, HDCP and CEC
transactions. You can check details
of each transaction in the log and
distribute the logs to colleagues and
subject matter experts.
Video Display Test – View video & metadata
SINK (DISPLAY) TEST & DIAGNOSTIC FEATURES
Verify EDID Contents
Select from CEA and VESA formats
or create your own custom formats
including 4K resolutions for Ultra HD
testing up to 300 MHz. Use the test
pattern library to verify specific
video display elements. Set bit
depth, pixel encoding, colorimetry
and sampling parameters. Use
industry standard patterns for color
calibration. Create custom bitmap
test patterns. Scroll bitmaps to test
motion artifacts.
Many interoperability problems are
related to EDIDs. You can view the EDID
contents of any connected display to
verify its audio/video capabilities
(including HDR elements). You can
verify the structure of an EDID and
check for compliance.
Video Test – Select formats & parameters
HDMI/HDBaseT
Extender Pair
HDMI Switch
You can use the 780AH to verify
audio on displays or audio systems
using programmable LPCM test
tones. Set sampling rate, bit depth,
amplitude and number of channels.
You can select Dolby and DTS
compressed audio clips including
Dolby TrueHD & DTS Master Audio.
Audio Test
Select compressed or LPCM tones
780AH
emulating
display
HDMI Source
Verify Audio
Verify Video
HDMI A/V Rx
Format Analyzer – View metadata & timing
780AH
emulating
source
HDMI UHD TV
EDID Verification Test
HDMI/HDBaseT
Extender Pair
Example Source Test Setup
Verify Cable / Network (Loop)
Verify Video at Far End
The 780AH enables you to test
distribution equipment to verify
integrity of extenders, matrix switches
and distribution amps. You can test
individual devices or entire networks
including digital video cables.
The 780AH supports testing of
installed distribution networks
from the far-end at the display.
HDMI Switch
Cable Test - Verify networks and cables
HDMI A/V Rx
HDMI/HDBaseT
Extender Pair
HDMI Switch
Example Network Test Setup
Sink (Display) Test Setup
Verify HDCP Authentication
780AH
emulating
source &
display
Verify distribution network from far end
HDMI A/V Rx
HDCP authentication problems
occur in complex digital video
distribution networks. Use the
HDCP test to quickly check HDCP
1.4 and HDCP 2.2 authentication.
Enabling and disabling HDCP can
quickly reveal the nature of an
interoperability problem. Monitor
the HDCP transactions during the
HDCP test using the Aux Channel
Analyzer.
Aux Channel Analyzer
HDCP Authentication Test
SPECIFICATIONS
HDMI
Version
Standard Formats
Connector
Protocol
Video Colorimetry
Video Max Pixel Rate
Color Depths
Video Encoding / Sampling
HDCP
Audio Formats
Audio LPCM Settings
HDMI 2.0
VESA (DMT, CVT-R, CVT), CEA
(1) Type A Tx; (1) Type A Rx
HDMI, DVI
ITU-R BT.601-5, ITU-R BT.709-5
300 MHz (300 Gbps/channel TMDS rate)
8, 10, 12 bits
RGB, YCbCr; 4:4:4, 4:2:2, 4:2:0
Versions 1.4 & 2.2
LPCM, Dolby (DD, DD+, TrueHD), DTS (ES, HD, Master Audio)
Sampling rates (32 – 192 kHz); Bits per sample (16, 20, 24)
quantumdata™ 780AH
Handheld Test Instrument
with 297MHz for 4K Testing
Digital Audio
Connectors
Audio Formats
Audio LPCM Settings
Optical (JIS FOS); SPDIF (RCA)
LPCM, Dolby (DD, DD+), DTS (ES, HD)
Sampling rates (32 – 192 kHz); Bits per sample (16, 20, 24)
Key Features
Analog Video
Connector
Format Standards
Video Encoding
Max Pixel Rate
VGA HD-15
VESA, CEA
RGB, YPbPr
80 MHz (higher resolutions supported through pixel repetition)
Options
Cable Test
Netwrok Analyzer
ACA Monitor (emulation)
ACA Monitor (passive)
Report File Creation NEW!
Test digital video cables and video distribution networks
Protocol testing of sources and sinks
Monitor aux channel and CEC bus while emulating a source or sink device
Monitor aux channel and CEC bus passively between source and sink devices
Provides HTML formatted report of tests performed
Instrument
Battery
AC Adapter
Weight
Embedded Display
Tilt Bail
Size
Command Line Control
Environmental
File Access
6AA NiMh batteries. 2 hours between charge. Overnight charge required.
100-120 VAC, 47-63Hz; 0.4 amps max
3.25 LBS; 1.47 Kg
480 (H); x 272 (V) resolution; 24 bit RGB color.
For convenient viewing
Height: 2.7 in. (6.98 cm) Width: 9.75 in. (24.76 cm) Depth: 6 in. (15.24 cm)
USB Type B
Operating Temp: 32 to 104 (F); 0 to 40 (C)
USB Type B (command line / file transfer; SD Card (upgrades / file transfer)
HDMI input and output ports for
testing both source display devices
as well as cables and distribution
networks
Teledyne LeCroy’s quantumdata 780AH Handheld Test Instrument is a
battery powered portable, handheld digital video generator and
analyzer that enables you to run tests on digital video devices and
network distribution devices on site or in the R&D lab. The HDMI ports
support testing up to 300 MHz pixel rate. Testing these HDMI devices
Test Ultra High Definition video
products supporting 4K resolutions
up to 300 MHz
is supported by both an output port and an input port to allow testing of
Video pattern and format library
with programmable settings
analog.
Diagnose and Troubleshoot
Ease of Use
Protocol tests for digital video
sources and displays, including
test for HDCP 2.2 authentication
The 780AH model provide a status bar
The 780AH’s color touch screen
on the bottom of the touch screen. The
provides ease of use. The rich set of
status bar provides basic information
routine tests and diagnostic tests are
about what the instrument is
accessible with just a few touch
transmitting to a display. The
clicks. You can quickly configure
instruments can run quick video audio
settings on the outputs. A rich
and protocol tests on individual sources,
command set, available either through
displays , repeaters, distribution gear as
USB or RS-232 serial ports, supports
well as cables. Protocol tests include
automated testing.
Protocol logging application
auxiliary channel analyzer (ACA)
enables real time monitoring of
EDID exchanges, SCDC, HDCP
(including HDCP 2.2) transactions
and CEC messages
Passive protocol logging between a
source and a sink is also optionally
supported on HDMI ports
NEW! Report File Creation feature
provides HTML formatted report of
tests performed
HDMI video sources, displays, audio devices and distribution devices.
The 780AH also offers a VGA output for testing RGB and component
tests for EDID, HDCP authentication,
infoframes and timing data. You can
place the 780AH at any point in a video
distribution network and run tests
upstream toward the source while
emulating a display (or sink). Or you
can run tests downstream while
emulating a source. Generate reports to
demonstrate test series completion.
1-800-909-7211
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
©2016 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
v0913
工商网监
湘ICP备2023018690号
