S114D-18

TELEDYNE RELAYS CENTIGRID® SURFACE MOUNT AEROSPACE RELAY DPDT SERIES S114 SERIES DESIGNATION S114 S114D S114DD DPDT basic relay RELAY TYPE DPDT relay with internal diode for coil suppression DPDT relay with internal diodes for coil transient suppression and polarity reversal protection INTERNAL CONSTRUCTION DESCRIPTION The S114 Series Surface Mount Centigrid® Relay is an ultraminiature, hermetically sealed, armature relay. The low profile height (.360”) and .100” lead spacing make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The specially formed leads are pre-tinned to make the relays ideal for most types of surface mount solder reflow processes. The basic design and internal construction are identical to the 114 Series Centigrid® relays, and are capable of meeting Teledyne Relays T 2R® requirements. The following unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: • • • • • All welded construction. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. High force/mass ratios for resistance to shock and vibration. Advanced cleaning techniques provide maximum assurance of internal cleanliness. Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. UNIFRAME ARMATURE UPPER STATIONARY CONTACT MOVING CONTACT LOWER STATIONARY CONTACT ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) Vibration Shock Acceleration Enclosure Weight Reflow Temperature -65°C to +125°C 30 g’s to 3000 Hz (Note 3) 75 g’s for 6 msec. (Note 3) half-sine 50 g’s (Note 3) All welded, hermetically sealed 0.07 oz (1.9 gms.) max. 260°C max. temp. 5 min. max. above 180°C The S114D and S114DD Series utilize internal discrete silicon diodes for coil suppression and polarity reversal protection. By virtue of its inherently low intercontact capacitance and contact circuit losses, the S114 relay has shown itself to be an excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the S114 relay is in hand held radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of transmit-receive switching (see Figure 1). 56 SERIES S114 GENERAL ELECTRICAL SPECIFICATIONS Contact Arrangement Rated Duty Contact Resistance (Note 4) Contact Load Rating (DC) (See Fig. 3 for other DC resistive voltage/current ratings) Contact Load Ratings (AC) Contact Life Ratings (-65°C to +125°C unless otherwise noted) (Notes 1 & 2) 2 Form C (DPDT) Continuous 0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28VDC, (measured 1/8” from header along lead) Resistive: 1 Amp/28VDC Inductive: 200 mA/28VDC (320 mH) Lamp: 100 mA/28VDC Low Level: 10 to 50 µA/10 to 50 mVDC Resistive: 250 mA/115VAC, 60 and 400Hz (Case underground) 100 mA/115VAC, 60 and 400Hz (Case grounded) 10,000,000 cycles (typical) at low level 01,000,000 cycles (typical) at 0.5A/28VDC resistive 00,100,000 cycles min. at all other loads specified above 2A/28VDC Resistive (100 cycles min.) Contact factory 450 milliwatts typical at nominal rated voltage @ 25°C 2.0 msec max. at nominal rated coil voltage @ 25°C S114 Series: 1.5 msec max. S114D, S114DD Series: 4.0 msec max. 1.5 msec max. 0.4 pf typical 10,000 megohms min. between mutually isolated terminals Atmospheric pressure: 500 VRMS/60 Hz 70,000 ft.: 125 VRMS/60Hz 100 VDC min. 1.0 VDC max. Contact Overload Rating Contact Carry Rating Coil Operating Power Operate Time Release Time Contact Bounce lntercontact Capacitance Insulation Resistance Dielectric Strength Diode P.I.V. S114D, S114DD Negative Coil Transient S114D, S114DD DETAILED ELECTRICAL SPECIFICATIONS BASE PART NUMBERS Coil Voltage (VDC) Coil Resistance (Ohms ± 10% @ 25°C) Coil Current (mADC @ 25°C) (S114DD Series only) Pick-up Voltage (VDC, Max.) (-65°C to +125°C unless otherwise noted) (Note 2) S114-5 S114D-5 S114DD-5 5.0 5.8 50 39 93.2 128.2 3.5 4.0 0.14 2.3 0.6 2.8 S114-6 S114D-6 S114DD-6 6.0 8.0 98 78 57.8 74.8 4.5 5.0 0.18 3.2 0.7 3.4 S114-9 S114D-9 S114DD-9 9.0 12.0 220 220 33.0 42.9 6.8 7.8 0.35 4.9 0.8 5.3 S114-12 S114D-12 S114DD-12 12.0 16.0 390 390 25.6 32.8 9.0 10.0 0.41 6.5 0.9 6.5 S114-18 S114D-18 S114DD-18 18.0 24.0 880 880 17.5 22.1 13.5 14.5 0.59 10.0 1.1 10.0 S114-26 S114D-26 S114DD-26 26.5 32.0 1560 1560 14.8 18.5 18.0 19.0 0.89 13.0 1.4 13.0 ± Dropout Voltage (VDC) Nom. Max. S114, S114D S114DD (Note 4) Min. (Note 4) Max. S114, S114D S114DD S114 Min. S114D Max. S114DD Min. Max. PERFORMANCE CURVES (NOTE 1) TYPICAL RF PERFORMANCE (NOTE 10) TYPICAL DC CONTACT RATING (RESISTIVE) 0 .1 .2 .4 dB INSE RTIO N LOSS 300 LOAD VOLTAGE (VDC) .3 10 20 30 40 50 60 70 .01 0.5 .1 .5 1.0 FREQUENCY (GHz) 250 200 150 100 50 R LOS ETURN S (VSW R) 1.92 1.22 1.07 1.02 LES ATIO ISOL N AC ROSS ACTS CONT A S PO CROS 1.01 1.00 1.00 TION ISOLA VSWR 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 LOAD CURRENT (AMPS DC) FIGURE 1 FIGURE 2 57 SERIES S114 OUTLINE DIMENSIONS AND RECOMMENDED PAD LAYOUT (Notes 6, 7, 8 & 9) .335 MAX (8.51) TERMINAL LOCATIONS AND SCHEMATIC DIAGRAMS 7 8 1 .275 MAX (6.99) .360 MAX (9.14) 6 2 +.030 .378 –.020 TYP +.76 (9.60 –.51 ) S114 Ø.017 REF (.43) 2° ± 2° TYP 5 7 4 3 8 (–) 1 .031 REF (.79) .035 REF (.89) 4° MAX TYP 4° MAX TYP .045 MIN 8 PL (1.14) .100 TYP (2.54) .200 (5.08) .410 MIN (10.41) .100 4 PL (2.54) 6 2 S114D 5 7 4 (+) 3 8 (–) 1 .375 SQ MAX (9.53) .200 (5.08) .200 (5.08) 6 2 TELEDYNE PART NUMBERING SYSTEM FOR SURFACE MOUNT RELAYS S SURFACE MOUNT SERIES NO. DD = SUPPRESSION DIODE DD = SUPPRESSION AND POLARITY PROTECTION DIODES S114DD 5 4 (+) 3 1 1 4 D -2 6 SCHEMATICS ARE VIEWED FROM TERMINALS COIL VOLTAGE NOTES: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Characteristics shown as “typical” are based on available data and are best estimates. No on-going verification tests are performed. Unless otherwise specified, parameters are initial values. Relays will exhibit no chatter in excess of 10 µsec or transfer in excess of 1 µsec. For reference only. Coil resistance not directly measurable at relays terminals due to internal series semiconductor. Measured at nominal voltage for 5 sec. max. Position of leads as they emerge from relay base. Leads will fit noted pad layout with no overhang. Lead ends are coplanar within .008” wide tolerance zone. Terminals coated with SN60 or SN63 solder per QQ-S-571. Kovar exposed at sheared end of leads. RF performance curves based on 114 series relays. ©1996 TELEDYNE RELAYS 58 12525 Daphne Avenue Hawthorne, California 90250