T3AFG40

T3AFG Function / Arbitrary Waveform Generator Data Sheet Debug with Confidence 5 MHz – 120 MHz Teledyne Test Tools T3AFG range of generators are a series of single and dual-channel function/arbitrary waveform generators with specifications of up to 120 MHz maximum bandwidth, 1.2GSa/s maximum sampling rate and 14 or 16-bit vertical resolution. The proprietary TrueArb & EasyPulse techniques used on the higher bandwidth models helps to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms. With advantages above the T3AFG generators can provide users with a variety of high fidelity and low jitter signals, which can meet the growing requirements of complex and extensive applications. Tools for Improved Debugging Deep Memory – up to 8 Mpts/Ch on 40 MHz to 120 MHz models. 16 kpts on 5 MHz and 10 MHz models.  Generate complex arbitrary waveforms. Wide Range of Modulation Types – AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst, and PSK on 2 Ch models.  Quickly set up modulated waveforms. High Resolution – 14 Bit on 5 MHz and 10 MHz models, 16 bit on 40 MHz to 120 MHz models.  Generate waveforms with low noise and spurious signal content. ● Bandwidth Models up to 120 MHz  Wide choice of bandwidths. ● Built In Arbitrary Waveforms  Load and replay built in Arbitrary Waveforms. ● User Defined Waveforms  Store and recall user defined waveforms. ● ● ● Key Specifications Bandwidth 5 MHz, 10 MHz, 40 MHz, 80 MHz, 120 MHz Channels 1 and 2 Channel Models Memory 16 kpts / Ch, 8 Mpts / Ch Sample Rate up to 1.2 GS/s Display 3.5” – 4.3” Connectivity USB Host, USB Device, LAN T3AFG FUNCTION / ARBITRARY WAVEFORM GENERATOR The T3AFG range of Function / Arbitrary Waveform Generators support a wide range of modulation types. Burst mode supports ‘N Cycle’ and ‘Gated’ modes with the Burst source being configured as ‘Internal’, ‘External’ or ‘Manual’. Sweep mode supports ‘Linear’ and ‘Log’ sweep, with ‘Up’ and ‘Down’ direction, and Sweep source being configured as ‘Internal’, ‘External’ or ‘Manual’. Ordering Information Model Bandwidth Channel Memory per Ch Sample Rate per Ch T3AFG5 5 MHz 1 16 kpts 125 MS/s T3AFG10 10 MHz 1 16 kpts 125 MS/s T3AFG40 40 MHz 2 8 Mpts 1.2 GS/s T3AFG80 80 MHz 2 8 Mpts 1.2 GS/s T3AFG120 120 MHz 2 8 Mpts 1.2 GS/s Function T3AFG5, T3AFG10 T3AFG40, T3AFG80, T3AFG120 Built-in Waveforms 5 Standard, 46 Arbitrary 5 Standard, 196 Arbitrary Input /Output 1 Waveform Output, Synchronous Signal Out, External Trigger In 2 Waveform Outputs, Counter Input, Aux In/Out, 10 MHz Clock In/Out Modulation Functions AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst AM, DSB-AM, FM, PM, FSK, ASK, PSK, PWM. Sweep, Burst, Harmonic TrueArb and EasyPulse No Yes Maximum Amplitude Output 10 Vpp at 50 Ohms, 20 Vpp at HiZ < 20 MHz: 10 Vpp at 50 Ohms, 20 Vpp at HiZ > 20 MHz: 5 Vpp at 50 Ohms, 10 Vpp at HiZ Vertical D/A Resolution 14 Bits 16 Bits Display Size 3.5" TFT-LCD 4.3" Touch Screen Excellent Performance ● ● ● Bandwidths from 5 MHz to 120 MHz 1 or 2 Channel Models Up to 8 Mpts/Channel memory Great Connectivity ● ● ● USB host port for mass storage USB device port (USBTMC) LAN port on 2 channel models Smart Capabilities ● ● ● ● ● ● ● 2 Sweep output carrier can be Sine, Square, Triangle and Arbitrary waveforms Burst output under internal or external signal control Waveforms types include DC Frequency Resolution 1 uHz DSB-AM: Double Sideband AM modulation Function Harmonic Function on 2 channel models Multi-Language User Interface Frequency Specification Model T3AFG5 T3AFG10 T3AFG40 T3AFG80 T3AFG120 Waveform Sine Square Pulse Ramp/Triangular Gaussian white noise Arbitrary Resolution Accuracy Sine, Square, Ramp, Pulse, Noise, Arbitrary 1 μHz ~ 5 MHz 1 μHz ~ 10 MHz 1 μHz ~ 40 MHz 1 μHz ~ 80 MHz 1 μHz ~ 120 MHz 1 μHz ~ 5 MHz 1 μHz ~ 10 MHz 1 μHz ~ 25 MHz 500 μHz ~ 5 MHz 1 μHz ~ 25 MHz 1 μHz ~ 300 kHz 1 μHz ~ 1 MHz > 5 MHz (–3 dB) > 10 MHz (–3 dB) > 40 MHz (–3 dB) > 80 MHz (–3 dB) 120 MHz (–3 dB) 1 μHz ~ 5 MHz 1 μHz ~ 20 MHz 1 μHz Within 90 days ± 50 ppm 10-year aging ± 3.5 ppm at 25 Degrees C within 1 year ± 100 ppm Sine Wave Harmonic Distortion DC ~ 1 MHz ≤ 60 dBc 1 MHz ~ 10 MHz ≤ 55 dBc Total harmonic waveform distortion Spurious signal(non-harmonic) DC ~ 20 kHz, 1 Vpp < 0.2 % DC ~ 10 MHz ≤ 65 dBc 10 MHz ~ 20 MHz ≤ 60 dBc 20 MHz ~ 40 MHz ≤ 55 dBc 40 MHz ~ 60 MHz ≤ 50 dBc 60 MHz ~ 80 MHz ≤ 45 dBc 80 MHz ~ 100 MHz ≤ 40 dBc 100 MHz ~ 120 MHz ≤ 38 dBc 0.075 %, 0 dBm, 10 Hz ~ 20 kHz DC ~ 1 MHz ≤ 70 dBc 1 MHz ~ 10 MHz ≤ 60 dBc DC < 50 MHz ≤ 70 dBc > 50 MHz ≤ 65 dBc < 24 ns (10 % ~ 90 %) < 5 % (typical, 1 kHz, 1 Vpp) 20 % ~ 80 % 500 ps + 0.001 % of period 9 ns (10 % ~ 90 %) 3 % (typical, 100 kHz, 1 Vpp, 50 Ohm Load) 0.001 % ~ 99.999 % Limited By Frequency 150 ps, 1 Vpp, 50 Ohm Load Square Wave Rise/fall time Overshoot Duty Cycle Jitter Pulse Pulse width 16 ns, Min. 1 ns resolution Rise/Fall time (10 % ~ 90 %, typical) 20 ns ~ 1.6 ks Duty Cycle 0.1 % Resolution Overshoot Jitter(pk-pk) < 5 % 500 ps + 0.001 % of period 16.3 ns, Min. 8.4 ns ~ 22.4 s 0.001 % ~ 99.999 %, 0.001 % Resolution, Limited by Pulse Width 3 % (typical,100 kHz,1 Vpp, 50 Ohm Load) 150 ps, 1 Vpp, 50 Ohm Load Ramp /Triangle Wave Linearity Symmetry < 0.1 % of Vpp (typical, 1 kHz, 1 Vpp, 100 % symmetric) 0 % ~ 100 % ≤ 1 % of Vpp (typical, 1 kHz, 1 Vpp, 100 % symmetric) N/A N/A 10 Maximum Even, Odd, All 16 k points 14 bits 125 MSa/s 8 ns (typical) 8 ns (typical) 10 waveforms 8 M points 16 bits 75 MSa/s TrueArb Mode, 300 MSa/s DDS Mode 8 ns (typical) 150 ps, 1 Vpp, 50 Ohm Load, TrueArb Mode 10 waveforms 0 % ~ 100 % Harmonic Output Order Type Arbitrary Wave Waveform length Vertical resolution Sample rate Min. Rise/Fall time Jitter(pk-pk) Storage in non-volatile RAM ­memory (10 in total) 3 ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Location and Facilities Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Distributed by: Teledyne LeCroy (US Headquarters) 700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Phone: Fax Sales: Phone Support: Email Sales: Email Support: Web Site: 800-553-2769 or 845-425-2000 845-578-5985 1-800-553-2769 contact.corp@teledynelecroy.com support@teledynelecroy.com http://teledynelecroy.com/ Teledyne LeCroy (European Headquarters) Teledyne LeCroy GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: Fax: Phone Service: Phone Support: Email Sales: Email Service: Email Support: Web Site: +49 6221 82700 +49 6221 834655 +49 6221 8270 85 +49 6221 8270 28 contact.gmbh@teledynelecroy.com service.gmbh@teledynelecroy.com tlc.t3.appsupport.eu@teledyne.com http://teledynelecroy.com/germany teledynelecroy.com © 2018 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools.