T3DSO2204

T3DSO2000 Data Sheet Oscilloscopes Debug with Confidence 100 MHz – 300 MHz Front panel of the four channel series Front panel of the two channel series Tools for Improved Debugging ●● ●● ●● ●● ●● ●● Long Capture – 70 Mpts/Ch and 140 Mpts interleaved.  Capture more time and show more waveform detail. Math and Measure – 7 basic math functions plus FFT and 37 automatic measurement parameters.  Extract results from waveforms and measurements. Connectivity – USB for mass storage, printing and PC control, plus LAN for fast data transfer.  Save data for external analysis and screen images for reports. Optional Serial Bus Trigger and Decode – I2C, SPI, UART, RS232, CAN, LIN.  Debug serial buses directly in your Oscilloscope. Waveform Sequence Recorder – record and play back up to 80,000 waveforms.  Replay the changing waveform history. Optional MSO – 16 Digital Channels  Add mixed signal debugging to your Oscilloscope. Key Specifications Bandwidth 100 MHz, 200 MHz, 300 MHz Channels 2 or 4 Memory 70 Mpts/Ch (140 Mpts interleaved) Sample Rate up to 2 GS/s (Interleaved) Display 8" Bright TFT LCD (800 x 480) Connectivity USB Host, USB Device, LAN PRODUCT OVERVIEW T3DSO2102: 2 Channel 100 MHz T3DSO2104: 4 Channel 100 MHz T3DSO2202: 2 Channel 200 MHz T3DSO2204: 4 Channel 200 MHz T3DSO2302: 2 Channel 300 MHz T3DSO2304: 4 Channel 300 MHz Teledyne Test Tools new T3DSO2000 Oscilloscopes feature two channel and four channel models with analog bandwidth options from 100 MHz to 300 MHz. Each model offers a maximum sample rate of 2 GSa/s, and a maximum memory depth of 140 Mpts in half channel mode. The four channel models incorporates two 2 GSa/s ADCs and two 140 Mpts memory modules. When all channels are enabled, each channel has sample rate of 1 GSa/s and a standard record length of 70 Mpts. When only a single channel per ADC is active, the maximum sample rate is 2 GSa/s and the maximum record length is 140 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. TheT3DSO2000seriesemploysa newgenerationof high speed display technology that provides excellent signalclarity,fidelityandperformance.Thesystemnoise floor is also lower than similar products in the industry. It comeswitha minimumverticalinputrangeof1mV/div, an innovative digital trigger system with high sensitivity andlowjitter,anda waveformcapturerateof500,000 waveforms/sec (sequence mode). The T3DSO2000 also employsa 256-levelintensitygradingdisplayfunction anda colortemperaturedisplaymodewhichcomplement the high speed update rate. Teledyne Test Tools latest oscilloscope offering supports multiple powerful triggering modesincludingserialbustriggering.Thereisa lowcost option for serial bus decoding of IIC, SPI, UART, CAN, LIN Key Features ●● ●● 100 MHz, 200 MHz and 300 MHz bandwidth models ●● ●● Real-timesamplingrateupto2Gsa/s ●● ●● New generation of high speed display technology Waveform capture rate up to 140,000 wfm/s  (normalmode),and500,000wfm/s(sequence mode) Supports256-levelintensitygradingandcolor display modes Record length up to 140 Mpts Digital trigger system › › › ●● ●● 2 bus types. The models also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. Other options available includethe25MHzfunction/arbitrarywaveform generatorandthe16channelMSOoption.Botharefield up gradable options. The new digital design also includes a hardwareco-processorthatdeliversmeasurements quickly and accurately without slowing acquisition and front-panelresponse.Thefeaturesandperformanceof Teledyne Test Tools new T3DSO2000 offers outstanding value for money. Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout(Dropout),PatternandVideo ●● ●● Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN Videotrigger,supportsHDTV Low background noise with voltage scales from 1mV/divto10V/div 10typesofone-buttonshortcuts,supportsAutoSetup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, witha verysmalldeadtimesegmenttocapturethe qualifying event. Models and key Specification Model T3DSO2102 T3DSO2104 T3DSO2202 T3DSO2204 T3DSO2302 T3DSO2304 Bandwidth 100 MHz 200 MHz 300 MHz SamplingRate (Max.) Twochannelserieshavea single2GSa/sADC,fourchannelserieshavetwo 2GSa/sADCs.Whenallchannelsareenabled,eachchannelhasa maximumsample rateof1GSa/s.Whena singlechannelperpairisactive,thatchannelhassamplerate of 2 GSa/s Channels 4 + EXT (four channel series) 2 + EXT (two channel series) Memory Depth (Max.) 70 Mpts/Ch (not interleave mode); 140 Mpts/Ch (interleave mode) Waveform Capture Rate (Max.) 140,000wfm/s(normalmode),500,000wfm/s(sequencemode) Trigger Type Edge,Slope,PulseWidth,Window,Runt,Interval,Dropout,Pattern,Video Serial Trigger and decoder (Optional) IIC, SPI, UART/RS232, CAN, LIN 16 Digital Channels (MSO option) Maximumwaveformcapturerateupto500MSa/s,Recordlengthupto140Mpts/Ch Waveform Generator (optional) Onechannel,25MHz,samplerateof125MHz,wavelengthof16kpts I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out Probe (Std) 1 for each Channel Display 8inchTFT-LCD(800x 480) ●● ●● ●● ●● ●● ●● History waveform record (History) function, maximum recorded waveform length is 80,000 frames. Automatic measurement function for 37 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions 8 Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root) ●● ●● ●● ●● Large8inchTFT-LCDdisplaywith800x480resolution Multiple interface types: USB Host, USB Device (USB-TMC),LAN,TriggerOut Supports SCPI remote control commands SupportsMulti-languagedisplayandembeddedonline help High Speed hardware based Pass/Fail function MSO, 16 digital channels. Record Length up to 140 Mpts/Ch 25MHzfunction/arbitrarywaveformgenerator, built-in10waveformtypes 3 FUNCTION & CHARACTERISTICS 2 4 3 1 5 6 8 9 1  HighResolution8-inchTFT-LCD 5  Multi-functionalcontrolsforSerial 2  HorizontalcontrolsofTimebase, 6  Individualcolorcodedchannels 3  AdvancedTriggeringcontrols 7  Optional25MHzbuiltinarbitrary display for clear images. Zoom, Roll and trigger position. including Edge, Pulse, Interval, Window, Slope, DropOut, Runt and Pattern trigger types. 4  EasytouseAutoSetup, Run / Stop and Default Controls. 8 inch TFT-LCD display and 10 one-button menus 8-inchTFT-LCDdisplaywith800x 480resolution ●● Most commonly used functions are accessible using 10differentone-buttonoperationkeys:AutoSetup, Default, Cursor, Measure, Roll, History, Persist, Clear ●● Sweep, Zoom, Print ●● 4 Decode, Math and Digital inputs. and display for ease of use. waveform generator. 8  Probecompensationcalibrator. 9  Colorcodedinputchannels. 7 A Wide Range Of Trigger Functions Record Length of up to 140 Mpts A wide rage of powerful triggering functions including Edge,Slope,Pulse,Video,Window,Runt,Interval, Dropout, Pattern, etc, allows users to debug complex hardware issues with ease. The record length of up to 140 Mpts allows use of a highersamplingratetocapturemoresignaldetail. Thehardware-basedZoomthenallowsquickzoom in to any area of interest. 256-level Intensity Grading and Color Temperature Display 256-levelintensitygradedwaveformdisplayisideal for viewing modulated and changing waveforms. Waveform Capture Rate up to 500,000 wfm/s Witha waveformcapturerateofupto500,000wfm/s (sequence mode) and 140,000 wfm/s (standard mode) the T3DSO2000 can easily capture glitches, infrequent anomaliesandotherlow-probabilityevents. History Mode The Color temperature display clearly shows noise and jitter with infrequently occurring waveforms shown in blue through to the most frequently occurring waveforms shown in red. The always enabled History mode records up to 80,000 waveforms allowing users to scroll back through previous acquisitions to observe past events and locate anomalies quickly. 5 FUNCTION & CHARACTERISTICS Sequence Mode Advanced Math Function Segmented memory mode can store up to 80,000 waveforms into memory segments for capturing fast pulses in quick succession. Combine Sequence Mode with advanced triggers to isolate rare events. All the segments can be play back using the History function. The standard Math operations include Plus, Minus, Multiply, Divide, FFT, integration, differential, and square root for quick insight into waveform characteristics. Comprehensive Statistical Functions Eres Mode Parametric statistical data for 5 parameters can be displayed simultaneously. The statistical measurements include: Current Value, Mean Value, Minimum Value, Maximum Value, Standard Deviation, and the measurement count. Enhanced Resolution (Eres) mode reveals hidden waveform detail by using a linear average filter to reduce waveform noise, even on single acquisition waveforms. 6 16 Digital Channels / MSO (Optional) Complete Connectivity The MSO option adds 16 digital channels to the T3DSO2000 analog channels enabling users to trigger and acquire digital as well as analog waveforms in a mixed signal debug environment. Connectivity includes External Trigger Input, Pass/Fail and Trigger Out, USB Device (USBTMC) and LAN(VXI-11) for remote control, and a Kensington Lock security point. Serial Bus Decoding Function (Optional) Built-in 25 MHz Function/Arbitrary Waveform Generator (Optional) Trigger and decode up to 2 common embedded and automotive serial buses (I2C, SPI, UART/RS232, LIN and CAN) simultaneously with the T3DSO2000-TD option. Bus protocol information can be quickly and intuitively displayed time aligned with the waveform and in table format. The optional built-in 25 MHz function generator (T3DSO2000-FG) comprises 10 built-in waveforms. 4 of your own arbitrary waveforms can be created and downloaded via PC waveform editing software. 7 SPECIFICATIONS All specifications are not guaranteed unless the following conditions are met: ●● The oscilloscope calibration period is valid ●● The oscilloscope has been working continuously for at least 30 minutes at the specified temperature (18 ~ 28 ) Acquire System Sampling Rate Memory Depth Peak Detect Average Eres Interpolation 2 GSa/s (single-channel 1) ), 1 GSa/s (dual-channel) 140 Mpts (single-channel), 70 Mpts (dual-channel) 1 ns Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Enhance bits: 0.5, 1, 1.5, 2., 2.5, 3 selectable Sinx/x, Linear Input Channels Coupling Impedance Max.Input voltage CH to CH Isolation Probe Attenuation 2/4 + EXT DC, AC, GND DC: (1 MΩ ± 2 %) || (22 pF ± 3 pF) 50 Ω: 50 Ω ± 2 % 1 MΩ ≤ 400 Vpk (DC + Peak AC 35 dB 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X, 20X, 50X, 100X, 200X, 500X, 1000X, 2000X, 5000X, 10000X Horizontal System Time Scale Channel Skew Waveform Capture Rate Intensity grading Display Format Time base Accuracy Roll Mode 1.0 ns/div ~ 50 s/div < 100 ps Up to 140,000 wfm/s (normal mode), 500,000 wfm/s (sequence mode) 256-level Y-T, X-Y, Roll ± 25 ppm 50 ms/div ~ 50 s/div (1-2-5 Step) Vertical System Bandwidth (-3dB) Vertical Resolution Vertical Range Vertical Scale (Probe 1X) Offset Range (Probe 1X) Bandwidth Limit Bandwidth Flatness Low Frequency Response (AC Coupling –3 dB) Noise DC Gain Accuracy Offset Accuracy Rise Time 1) Overshoot (500 ps Rise Edge) 8 300 MHz (SDS2304X / SDS2302X) 200 MHz (SDS2204X / SDS2202X) 100 MHz (SDS2104X / SDS2102X) 70 MHz (SDS2074X / SDS2072X) 8 bit 8 divisions 1 mV/div – 10 V/div (1-2-5 step) 1 mV/div ~ 100 mV/div: ±1 V 102 mV/div ~ 1 V/div: ±10 V 1.02 V/div ~ 10 V/div: ±100 V 20 MHz ± 40 % DC ~ 10 % (BW): ± 1 dB 10 % ~ 50 % (BW): ± 2 dB 50 % ~ 100 % (BW): + 2 dB/–3 dB ≤ 10 Hz (at input BNC) stdev ≤ 0.2 div (< 2 mV/div) stdev ≤ 0.5 div (≥ 2 mV/div) 5 mV/div ~ 10 V/div: ≤ 3.0 % ≤ 2 mV/div: ≤ 4.0 % ≥ 2 mV/div: ± (1 % * offset + 1.5 % * 8 * div + 2 mV) < 2 mV/div: ± (1 % * offset + 1.5 % * 8 * div + 1 mV) (Typ.) < 1.2 ns (SDS2304X / SDS2302X) (Typ.) < 1.7 ns (SDS2204X / SDS2202X) (Typ.) < 3.5 ns (SDS2104X / SDS2102X) (Typ.) < 5.0 ns (SDS2074X / SDS2072X) < 10 % Trigger System Mode Level Holdoff Range Coupling Coupling Frequency Response (CH1 ~ CH4) 2) Coupling Frequency Response (EXT) 2) Accuracy 2) Sensitivity Jitter Displacement Auto, Normal, Single Internal: ± 4.5 div from the center of the screen EXT: ± 0.6 V EXT/5: ± 3 V 100 ns ~ 1.5 s AC, DC, LFRJ, HFRJ, Noise RJ (CH1 ~ CH4) DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 8 Hz LFRJ: Attenuates the frequency components below 900 kHz HFRJ: Attenuates the frequency components above 500 kHz DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 8 Hz LFRJ: Attenuates the frequency components below 400 kHz HFRJ: Attenuates the frequency components above 1 MHz CH1 ~ CH4: ± 0.2 div EXT: ± 0.3 div CH1 ~ CH4: 0.6 div EXT: 200 mVpp (DC ~ 10 MHz) 300 mVpp (10 MHz ~ BW) EXT/5: 1 Vpp (DC ~ 10 MHz) 1.5 Vpp (10 MHz ~ BW) < 100 ps (CH1 ~ CH4) Pre-Trigger: 0 ~ 100 % memory Delay-Trigger: 0 ~ 2,000 div Edge Trigger Slope Source Rising, Falling, Rising & Falling CH1 ~ CH4/EXT/(EXT/5)/AC Line Slope Trigger Slope Limit Range Source Time Range Resolution Rising, Falling , < >, > < CH1 ~ CH4 2 ns ~ 4.2 s 1 ns Pulse Width Trigger Polarity Limit Range Source Pulse Width Range Resolution +wid , -wid , < >, > < CH1 ~ CH4 2 ns ~ 4.2 s 1 ns Video Trigger Signal Standard Source Sync Trigger condition NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom CH1 ~ CH4 Any, Select Line, Field Window Trigger Window Type Source Absolute, Relative CH1 ~ CH4 1) Single-channel: one channel in CH1/CH2 (or CH3/CH4) is ON and another is OFF Dual-channel: both channels in CH1/CH2 (or CH3/CH4) are ON 2) Typical Value refers to the tested value under specific conditions. It might vary with the ambient temperature or other conditions 9 SPECIFICATIONS Interval Trigger Slope Limit Range Source Time Range Resolution Rising, Falling ,,>< CH1 ~ CH4 2 ns ~ 4.2 s 1 ns Dropout Trigger Timeout Type Source Slope Time Range Resolution Edge, State CH1 ~ CH4 Rising, Falling 2 ns ~ 4.2 s 1 ns Runt Trigger Polarity Limit Range Source Time Range Resolution +wid , -wid ,,>< CH1 ~ CH4 2 ns ~ 4.2 s 1 ns Pattern Trigger Pattern Setting Logic Source Limit Range Time Range Resolution Invalid, Low, High AND, OR, NAND, NOR CH1 ~ CH4 ,,>< 2 ns ~ 4.2 s 1 ns Serial Trigger IIC Trigger Condition Source (SDA/SCL) Data format Limit Range Data Length R/W bit SPI Trigger Condition Source (CS/CL/Data) Data format Data Length Bit Value Bit Order 10 Start, Stop, Restart, No Ack, EEPROM, Address&Data, Data Length CH1 ~ CH4 Hex EEPROM: =, >, < EEPROM: 1 byte Address & Data: 1 ~ 2 byte Data Length: 1 ~ 12 byte Address & Data: Read, Write, Do not care Data CH1 ~ CH4 Binary 4 ~ 96 bit 0, 1, X LSB, MSB UART / RS232 Trigger Condition Source (RX/TX) Data format Limit Range Data Length Data Width Parity Check Stop Bit Idle Level Baud Rate (Selectable) Baud Rate (Custom) CAN Trigger Type Source ID Data format Data Length Baud Rate (Selectable) Baud Rate (Custom) LIN Trigger Type Source ID Data format Data Length Baud Rate (Selectable) Baud Rate (Custom) Start, Stop, Data, Parity Error CH1 ~ CH4 Hex =, >, < 1 byte 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.5 bit, 2 bit High, Low 600/1200/2400/4800/9600/19200/38400/57600/115200 bit/s 300 bit/s ~ 334000 bit/s All, Remote, ID, ID + Data, Error CH1 ~ CH4 STD (11 bit), EXT (29 bit) Hex 1~2 byte 5 k/10 k/20 k/50 k/100 k/125 k/250 k/500 k/800 k/1 M bit/s 5 kbit/s ~ 1 Mbit/s Break, Frame ID, ID+Data, Error CH1 ~ CH4 1 byte Hex 1 ~ 2 byte 600/1200/2400/4800/9600/19200 bit/s 300 bit/s ~ 20 kbit/s Serial Decoder (Optional) No. of Decoder IIC Decoder Signal Address Threshold List SPI Decoder Signal Edge Select Idle Level Bit Order Threshold List UART / RS232 Decoder Signal Data Width Parity Check Stop Bit Idle Level Threshold List CAN Decoder Signal Source Threshold List LIN Decoder LIN Specification Package Revision Threshold List 2 SCL, SDA 7 bit, 10 bit -4.5 ~ 4.5 div 1 ~ 7 lines CLK, MISO, MOSI, CS Rising, Falling Low, High MSB, LSB -4.5 ~ 4.5 div 1 ~ 7 lines RX, TX 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.5 bit, 2 bit Low, High -4.5 ~ 4.5 div 1 ~ 7 lines CAN_H, CAN_L CAN_H, CAN_L, CAN_H-CAN_L -4.5 ~ 4.5 div 1 ~ 7 lines Ver1.3, Ver2.0 -4.5 ~ 4.5 div 1 ~ 7 lines 11 SPECIFICATIONS Measurement Source No. of Measurements Range Measurement Parameters (37 Types) Vertical (Voltage) Horizontal (Time) Delay Cursors Statistics Counter 12 CH1 ~ CH4, Math, Ref, History Display 5 measurements at the same time Screen, Gating Vmax Vmin Vpp Vamp  ighest value in input waveform H Lowest value in input waveform Difference between maximum and minimum data values Difference between top and base in a bimodal signal, or between max and min in an unimodal signal Vtop Value of most probable higher state in a bimodal waveform Vbase Value of most probable lower state in a bimodal waveform Mean Average of all data values Vmean Average of data values in the first cycle stdev Standard deviation of all data values Vstd Standard deviation of all data values in the first cycle Vrms Root mean square of all data values Crms Root mean square of all data values in the first cycle FOV Overshoot after a falling edge; (base-min)/Amplitude FPRE Overshoot before a falling edge; (max-top)/Amplitude ROV Overshoot after a rising edge; (max-top)/Amplitude RPRE Overshoot before a rising edge; (base-min)/Amplitude Level@X The voltage value of the trigger point Period Period for every cycle in waveform at the 50 % level, and positive slope Freq Frequency for every cycle in waveform at the 50 % level, and positive slope +Wid Width measured at 50 % level and positive slope -Wid Width measured at 50 % level and negative slope Rise Time Duration of rising edge from 10 – 90 % Fall Time Duration of falling edge from 90 – 10 % Bwid Time from the first rising edge to the last falling edge, or the first falling edge to the last rising edge at the 50 % crossing +Dut Ratio of positive width to period -Dut Ratio of negative width to period Delay Time from the trigger to the first transition at the 50 % crossing Time@Level Time from trigger of each transition at a specific level and slope Phase Calculate the phase difference between two edges FRR Time between the first rising edges of the two channels FRF Time from the first rising edge of channel A, to the first falling edge of channel B FFR Time from the first falling edge of channel A, to the first rising edge of channel B FFF Time from the first falling edge of channel A, to the first falling edge of channel B LRR Time from the first rising edge of channel A, to the last rising edge of channel B LRF Time from the first rising edge of channel A, to the last falling edge of channel B LFR Time from the first falling edge of channel A, to the last rising edge of channel B LFF Time from the first falling edge of channel A, to the last falling edge of channel B Manual: Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2) Track: Time X1, X2, (X1-X2) Current, Mean, Min, ± 1 Hz counter error Math Operation FFT window FFT display +, -, *, /, FFT, d/dt, ∫dt, square root Rectangular, Blackman, Hanning, Hamming Full Screen, Split Built-in Function/Arbitrary Waveform Generator (Optional) Channel Max. Output Frequency Sampling Rate Frequency Resolution Frequency Accuracy Vertical Resolution Amplitude Range Waveforms Output Impedance Protection 1 25 MHz 125 MSa/s 1 μHz ± 50 ppm 14 bits 2 mVpp ~ 3 Vpp (into 50 Ω) 4 mVpp ~ 6 Vpp (into HiZ) Sine, Square, Ramp, Pulse, DC, Noise, Cardiac, Gaus Pulse, Exp Rise, Exp Fall, Arb 50 Ω ± 2 % Short-Circuit Protection Sine Frequency Offset Accuracy (100 kHz) Amplitude Flatness (Compare to 100 kHz, 5 Vpp) SFDR HD 1 μHz ~ 25 MHz ± (0.3 dB * offset setting value + 1 mVpp) ± 0.3 dB DC ~ 1 MHz -60 dBc 1 MHz ~ 5 MHz -55 dBc 5 MHz ~ 25 MHz -50 dBc DC ~ 5 MHz -50 dBc 5 MHz ~ 25 MHz -45 dBc Square/Pulse Frequency Duty Cycle Rise/Fall time Overshoot Pulse Width Jitter 1 μHz ~ 10 MHz 20 % ~ 80 % < 24 ns (10 % ~ 90 %) < 3 % (typical, 1 KHz, 1 Vpp) > 50 ns < 500 ps + 10 ppm Ramp Frequency Linearity (Typical) Symmetry 1 μHz ~ 300 kHz < 0.1 % of Pk-Pk (Typical, 1 kHz, 1 Vpp, 100 % Symmetry) 0 % ~ 100 % DC Offset range Accuracy ± 1.5 V (into 50 Ω) ± 3 V (into HiZ) ± (|offset| * 1 % + 3 mV) Noise Bandwidth > 25 MHz (-3 dB) Arb Frequency Wave Length Sampling Rate Waveform Import 1 μHz ~ 5 MHz 16 Kpts 125 MSa/s EasyWave, U-Disk 13 SPECIFICATIONS Digital Channels No. of Channels Max. Sampling Rate Memory Depth Min. Detectable Pulse Width Level Group Level Range Logic Type Skew 2) 16 500 MSa/s 14 Mpts/Ch 4 ns D0 ~ D7, D8 ~ D15 -3 V ~ 3 V TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom D0 ~ D15: ± 1 sampling interval Digital to Analog: ± (1 sampling interval +1 ns) I/O Standard Pass/Fail USB Host, USB Device, LAN, Pass/Fail, Trigger Out 3.3 V TTL Output Display Display Type Resolution Color Contrast Backlight Range 8-inch TFT LCD 800 × 480 24 bit 500:1 300 nit 8 x 14 divisions Waveform Display Type Persistence Time Color Display Screen Saver Dot, Vector OFF, 1 s, 5 s, 10 s, 30 s, infinite Normal, Color 1 min, 5 min, 10 min, 30 min, 1 hour, OFF Language Language Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German, Russian, Italian, Portuguese Environments Temperature Humidity Altitude Electromagnetic Compatibility Safety Operating: 10 ~ 40 Non-operating: -20 ~ 60 Operating: 85 % RH, 40 Deg C, 24 hours Non-operating: 85 % RH, 65 Deg C, 24 hours Operating: ≤ 3000 m Non-operating: ≤ 15,266 m 2004/108/EC Execution Standard EN 61326-1:2006 EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008 2006/95/EC Execution Standard EN 61010-1:2010 / EN 61010-2-030:2010 Power Supply Input Voltage & Frequency Power 100 ~ 240 Vrms 50/60 Hz 100 ~ 120 Vrms 400 Hz 25 W Max Mechanical Dimensions Weight 2) Length * Width * Height = 352 mm * 128 mm * 224 mm N.W 3.4 Kg (2-ch); 3.6 Kg (4-ch) G.W 4.9 Kg (2-ch); 5.2 Kg (4-ch) Typical Value refers to the tested value under specific conditions. It might vary with the ambient temperature or other conditions 14 T3DSO2000 Probes Probe type Model Passive T3PP300 300 MHz bandwidth, 1 Mohm 10X Probe 1 supplied per channel. Logic Probe T3DSO2000-LS 16 Channel Logic Probe. This probe REQUIRES that the Oscilloscope has option T3DSO2000-MSO MSO Software T3DSO2000MSO1) Software License for the MSO capability. Enables one T3DSO2000-LS 16 channel logic probe lead set to be shared amongst several licensed T3DSO2000 oscilloscopes. This software option does not come with a logic probe lead set. Current T3CP50 Bandwidth: 50 MHz, Max. continuous current: 30 Arms, Peak current: 50A Switch Ratio: 100 mV/A, 1 V/A, Accuracy: 1 V/A (±1 % ±1 mA), 100 mV/A (±1 % ±10 mA), DC 12 V / 1.2 A power adapter High Voltage Differential T3DP7000 Bandwidth: 100 MHz Differential Range: 7000 V (DC + Peak AC), 100X/1000X Accuracy: ±2 % DC 5 V/1 A USB adapter High Voltage T3VP100 Bandwidth: 40 MHz Differential Range: DC 10 KV, AC (rms): 7 KV (sine), AC (Vpp): 20KV (Pulse) 1000X Accuracy: ≤ 3 % 1) Picture Description This probe REQUIRES that the scope has option T3DSO2000-MSO. Ordering information Description Standard Accessories Optional Accessories 300 MHz, 4 Ch, 2 GSa/s (Max.), 140 Mpts 300 MHz, 2 Ch, 2 GSa/s (Max.), 140 Mpts 200 MHz, 4 Ch, 2 GSa/s (Max.), 140 Mpts 200 MHz, 2 Ch, 2 GSa/s (Max.), 140 Mpts 100 MHz, 4 Ch, 2 GSa/s (Max.), 140 Mpts 100 MHz, 2 Ch, 2 GSa/s (Max.), 140 Mpts USB Cable -1 Passive Probe -2 (2-ch model); -4 (4-ch model) Power Cord -1 Quick Start -1 Certificate of Calibration -1 T3DSO2000-TD T3DSO2000-FG T3DSO2000-MSO T3DSO2000-LS T3VP100 T3CP50 T3DP7000 T3DSO2304 T3DSO2302 T3DSO2204 T3DSO2202 T3DSO2104 T3DSO2102 IIC, SPI, UART/RS232, CAN, LIN Decoder 25 MHz Function/Arbitrary Waveform Generator 16 Digital Channels（Software, requires T3DSO2000-LS 16 Channel Logic Probe, requires T3DSO2000-MSO High Voltage Probe Current Probe High Voltage Differential Probe 15 ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Location and Facilities Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Distributed by: Teledyne LeCroy (US Headquarters) 700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Phone: Fax Sales: Phone Support: Email Sales: Email Support: Web Site: 800-553-2769 or 845-425-2000 845-578-5985 1-800-553-2769 contact.corp@teledynelecroy.com support@teledynelecroy.com http://teledynelecroy.com/ Teledyne LeCroy (European Headquarters) Teledyne LeCroy GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: Fax: Phone Service: Phone Support: Email Sales: Email Service: Email Support: Web Site: +49 6221 82700 +49 6221 834655 +49 6221 8270 85 +49 6221 8270 28 contact.gmbh@teledynelecroy.com service.gmbh@teledynelecroy.com tlc.t3.appsupport.eu@teledyne.com http://teledynelecroy.com/germany teledynelecroy.com © 2018 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools.