T3PS160141P

Power Supplies Datasheet Single Output Multi-Range Power Supplies Broad Product Range Current: Up to 72 Amps Voltage: Up to 800 Volts Power: Up to 720 Watts Tools for Improved Debugging Multi-range operation extends the Voltage and Current limit up to 3 times compared to conventional supply.  Single unit covers wide Voltage and Current Ranges. Adjustable Slew Rates for the level transition of both Current and Voltage.  Adjustable slew rates allows flexible output setting in various testing conditions. Ch1 and Ch2 support Constant Voltage and Constant Current Operation.  Flexible voltage and current output configurations for a broader application coverage. ● Fully programmable via LAN and USB interface.  Full remote control extends the usability from the bench to automated systems. ● 3 years warranty as standard.  Reliable product gives peace of mind. ● ● ● Models and Characteristics Models T3PS30721P T3PS80271P T3PS160141P T3PS250041P T3PS800011P Voltage 0 –  30 V 0 –  80 V 0 – 160 V 0 – 250 V 0 – 800 V Current 0 –   72 A 0 –   27 A 0 – 14.4 A 0 –  4.5 A 0 – 1.44 A Power 720 W 720 W 720 W 360 W 360 W MULTI-OUTPUT PROGRAMMABLE DC POWER SUPPLY The new T3PS series are single-output multi-range programmable switching DC Power Supplies covering a power range up to 720 W. This series of products offers five models with rated voltages of 30 V, 80 V, 160 V, 250 V and 800 V and 360 W and 720 W maximum output powers. The multi-range feature allows for a flexible and efficient configuration of voltage and current within the rated power range. A maximum of two units in series and a maximum of three units in parallel can be connected for applications requiring Voltage/Current higher than the rated output. The combination of multi-range power output feature and series/parallel operation capability of T3PS series significantly reduces the cost by accommodating the projects with wide range of power requirements. The C.V/C.C priority selection of the T3PS series is a very useful feature for DUT protection. The conventional power supply normally operates under C.V mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power-On stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under C.V mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from C.V mode to C.C mode. Though the current becomes stable after the C.C mode being activated, the current spike occurred at the C.V and C.C crossover point may possibly damage the DUT. At the power output-on stage, the T3PS supply is capable of operating under C.C priority to limit the current spike occurred at the threshold voltage and protects DUT from the inrush current damage. 2 The adjustable slew rate of the PSW-Series allows users to set a specific rise/fall time for signal transitions of either output voltage or output current. The adjustable slew rate feature is useful in manufacturing tests of lighting where a device or large capacitor during power output-on are associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging currentintensive devices, a smooth and slow voltage transition during power On-Off can significantly reduce the spike current and protect the device from high current damage. The T3PS series offers OVP and OCP. Both OVP and OCP levels can be selected, with default level set at 110 % of the rated voltage/current of the power supply. When any of the protection levels is tripped, the power output will be disabled to protect the DUT. The T3PS provides USB Host/Device and LAN interfaces as standard. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current. PANEL INTRODUCTION 720 W Models: T3PS30721P, T3PS80271P, T3PS160141P 9 7 1 6 2 4 3 8 10 13 12 11 16 5 14 Output Terminals (30, 80, 160 volt models) 15 Output Terminals (250, 800 volt models) 1  VoltageKnob 9  AnalogControlConnector 2  CurrentKnob 10  USBBPort 3  OutputKey 11  OutputTerminal(+) 4  FunctionKeys 12  SenseTerminal(+/-) 5  USBAPort 13  OutputTerminal(-) 6  Display 14  Fan 7  CoverPanel 15  ACInput 8  PowerSwitch 16  LANPort Features ● ● ● 360 W Models: T3PS250041P, T3PS800011P ● ● ● ● VoltageRating:30V/80V/ 160V/250V/800V, OutputPowerRating: 360W– 720W Multi-rangeVoltage&Current CombinationsinOnePower Supply C.V/C.CPriority;Particularly SuitablefortheBatteryandLED IndustryAdjustableSlewRate SeriesOperation(2unitsin Series),ParallelOperation (3unitsinParallel) HighEfficiencyandHigh Power Density 1/6,1/3RackMountSize Design(EIA/JISStandard) for 360W,720W StandardInterface:LAN,USB, AnalogControlInterface 3 FEATURES A. MULTI-RANGE OPERATION Operating areas of 360 W Models: T3PS250041P, T3PS800011P Operating areas of 720 W Models: T3PS30721P, T3PS80271P, T3PS160141P Whenthepowersupplyisconfiguredsothatthetotaloutput(currentxvoltageoutput)islessthantheratedpower output,thepowersupplyfunctionsasatypicalconstantcurrent,constantvoltagepowersupply.Ifhowever,the power supplyisconfiguredsuchthatthetotaloutput(currentxvoltageoutput)exceedstheratedpoweroutput,the effectiveoutputisactuallylimitedtothepowerlimitortheoperatingareaoftheunit.Inthiscasetheoutputcurrentand voltagethendependpurelyontheloadvalue.Thegraphsabovedisplaytheoperatingareasofeachpowersupply. B. ADJUSTABLE SLEW RATE C. T3PS Slew rate= Disabled Slew rate = Enabled TheT3PShasselectableslewratesforCCandCVmode. ThisgivestheT3PSpowersupplytheabilitytolimitthe current/voltagedrawofthepowersupply.Slewrate settingsaredividedintoHighSpeedPriorityandSlew RatePriority.HighSpeedPrioritymodedisablesslew ratesettingsforCCorCVmode.SlewRatePrioritymode allowsforuseradjustableslewratesforCCorCVmode. The risingandfallingslewratecanbesetindependently. BLEEDER CONTROL Bleed resistor Load TheT3PSDCpowersuppliesemployableedresistor inparallelwiththeoutputterminals.Bleedresistorsare designedtodissipatethepowerfromthepowersupply filtercapacitorswhenpoweristurnedoffandtheloadis disconnected.Withoutableedresistor,powermayremain chargedonthefiltercapacitorsforsometimeandbe potentiallyhazardous. Inaddition,bleedresistorsalsoallowforsmoothervoltage regulationofthepowersupplyasthebleedresistoracts asaminimumvoltageload. Thebleedresistancecanbeturnedonoroffusingthe configurationsettings. 4 SPECIFICATIONS T3PS30721P T3PS80271P T3PS160141P T3PS250041P T3PS800011P 0 – 30 V 0 – 72 A 720 W 0 – 80 V 0 – 27 A 720 W 0 –160 V 0 –14.4 A 720 W 0 – 250 V 0 – 4.5 A 360 W 0 – 800 V 0 – 1.44 A 360 W 20 mV 18 mV 45 mV 43 mV 85 mV 83 mV 130 mV 128 mV 405 mV 403 mV 77 mA 77 mA 32 mA 32 mA 19.4 mA 19.4 mA 9.5 mA 9.5 mA 6.44 mA 6.44 mA Output Rating Voltage Current Power Regulation(CV) Load Line Regulation(CC) Load Line Ripple & Noise (Noise Bandwidth 20 MHz; Ripple Bandwidth = 1 MHz) CVp-p CV rms CC rms 80 mV 11 mV 144 mA 80 mV 11 mV 54 mA 80 mV 15 mV 30 mA 80 mV 15 mV 10 mA 150 mV 30 mV 5 mA 0.1 % + 10 mV 0.1 % + 30 mA 0.1 % + 100 mV 0.1 % + 15 mA 0.1 % + 200 mV 0.1 % + 5 mA 0.1 % + 400 mV 0.1 % + 2 mA 0.1 % + 10 mV 0.1 % + 60 mA 0.1 % + 10 mV 0.1 % + 30 mA 0.1 % + 100 mV 0.1 % + 15 mA 0.1 % + 200 mV 0.1 % + 5 mA 0.1 % + 400 mV 0.1 % + 2 mA 50 ms 50 ms 500 ms 1 ms 50 ms 50 ms 500 ms 1 ms 100 ms 100 ms 1000 ms 2 ms 100 ms 150 ms 1200 ms 2 ms 150 ms 300 ms 2000 ms 2 ms 3 mV 2 mA 5 mV 1 mA 14 mV 1 mA 3 mV 2 mA 5 mV 1 mA 14 mV 1 mA Up to 3 units including the master unit Up to 2 units including the master unit 3 N/A 3 N/A 3 – 33 V 8 – 88 V 16 – 176 V 5 – 79.2 A 2.7 – 29.7 A 1.44 – 15.84 A Activated by elecated internal temperatures 20 – 275 V 0.45 – 4.95 A 20 – 880 V 0.144 – 1.584 A Programming Accuracy Voltage Current 0.1 % + 10 mV 0.1 % + 60 mA Measurement Accuracy Voltage Current Response Time Rise Time Fall Time (Full Load) Fall Time (No Load) Load Transient Recover Time (Load change from 50–100 %) Programming Resolution (PC Remote Control Mode) Voltage Current 1 mV 2 mA 2 mV 2 mA Measurement Resolution (PC Remote Control Mode) Voltage Current 1 mV 2 mA 2 mV 2 mA Series and Parallel Capability Parallel Operation Series Operation Protection Function OVP OCP OHP 5 SPECIFICATIONS T3PS30721P T3PS80271P T3PS160141P T3PS250041P T3PS800011P 0.1 % ± 20 mV 0.1 % ± 40 mA 0.1 % ± 100 mV 0.1 % ± 30 mA 0.1 % ± 200 mV 0.1 % ± 5 mA 0.1 % ± 400 mV 0.1 % ± 2 mA Front Panel Display Accuracy, 4 digits Voltage Current 0.1 % ± 20 mV 0.1 % ± 70 mA Environment Condition Operation Temp Storage Temp Operating Humidity Storage Humidity 0 °C – 50 °C -25 °C – 70 °C 20 % – 85 % RH; No condensation 90 % RH or Less; No condensation Read Back Temp Coefficient Voltage Current 100 ppm / °C of rated output voltage: after 30 minutes of warm-up 200 ppm / °C of rated output voltage: after 30 minutes of warm-up Other Analog Control Interface Fan Power Source Dimensions & Weight Yes USB/LAN With thermal sensing control single 85 VAC ~ 265 VAC, 47 ~ 63 Hz, single phase 142 (W) x 124 (H) x 142 (W) x 124 (H) x 142 (W) x 124 (H) x 71 (W) x 124 (H) x 350 (D) mm; 350 (D) mm; 350 (D) mm; 350 (D) mm; Approx 5.3 kg Approx 5.3 kg Approx 5.3 kg Approx 3 kg 71 (W) x 124 (H) x 350 (D) mm; Approx 3 kg Ordering Information Model Accessories T3PS30721P (0–30 V / 0–72 A / 720 W) Multi-Range DC Power Supply T3PS80271P (0–80 V / 0–27 A / 720 W) Multi-Range DC Power Supply T3PS160141P (0–160 V / 0–14.4 A / 720 W) Multi-Range DC Power Supply T3PS250041P (0–250 V / 0–4.5 A / 360 W) Multi-Range DC Power Supply T3PS800011P (0–800 V / 0–1.44 A / 360 W) Multi-Range DC Power Supply Power cord, Output terminal cover, Test leads: 1x red, 1x black, USB Cable T3PS30721P, Basic Accessory Kit: M4 terminal screws and washers x2, M8 terminal bolts, T3PS80271P, nuts and washers x2, Air filter x1, Analog control protection dummy x1, T3PS160141P Analog control lock level x1 T3PS250041P, Basic Accessory Kit: Air filter x1, Analog control protection dummy x1, T3PS800011P Analog control lock level x1 Warranty: 3 Years return to Teledyne LeCroy. 6 ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Location and Facilities Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Distributed by: Teledyne LeCroy (US Headquarters) 700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Phone: Fax Sales: Phone Support: Email Sales: Email Support: Web Site: 800-553-2769 or 845-425-2000 845-578-5985 1-800-553-2769 contact.corp@teledynelecroy.com support@teledynelecroy.com http://teledynelecroy.com/ World wide support contacts can be found at: https://teledynelecroy.com/support/contact World wide instrument service can be found at: https://teledynelecroy.com/support/service.aspx RoHS and WEEE information can be found at: https://teledynelecroy.com/support/rohs.aspx Teledyne LeCroy (European Headquarters) Teledyne GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: Fax: Phone Service: Phone Support: Email Sales: Email Service: Email Support: Web Site: +49 6221 82700 +49 6221 834655 +49 6221 8270 85 +49 6221 8270 28 contact.gmbh@teledynelecroy.com service.gmbh@teledynelecroy.com tlc.t3.appsupport.eu@teledyne.com http://teledynelecroy.com/ teledynelecroy.com © 2023 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools. 12jan23