T3PS3000 Data Sheet
Programmable DC Power Supply
Power with Confidence
32 Volts –
3.2 Amps –
220 Watts
T3PS3000 Rear View
Tools for Improved Debugging
3 Independent isolated outputs – 32 V /3.2 Ax2,
2.5 V /3.3 V /5 V 3.2 Ax1, total 220 W.
More application coverage from a single
power supply.
High Resolution, High Precision Output – 5 digits Voltage,
4 digits Current Display, Minimum Resolution: 1 mV /1 mA.
Excellent setting and read back accuracy.
●●
3 output modes: Series, Parallel and Independent.
Combine two channels into one for greater
power output flexibility.
●●
4.3 inch (10.92 cm) color TFT-LCD 480 x 272 display.
Clear and flexible display aids ease of use.
Graphical display interface with waveform display
function.
View waveform shape and timing settings.
Intelligent temperature controlled cooling fan.
Quieter operation by reducing fan speed during
low load usage.
●●
●●
●●
●●
Key Specifications
Independent Output Operation
0 V – 32 V, 3.2 A x 2, 2.5V /3.3 V/5 V x 1, 3.2 A
Parallel Output Operation
0 V – 32 V, 6.4 A x 1, 2.5 V /3.3 V /5 V x 1, 3.2 A
Series Output Operation
0 V – 64 V, 3.2 A x 1, 2.5 V /3.3 V /5 V x 1, 3.2 A
Maximum Power
220 Watts
Connectivity
USB Device, LAN
Remote Control
SCPI, LabView Driver
PRODUCT OVERVIEW
Teledyne Test Tools new T3PS3000 is a Linear Programmable DC Power Supply with a 4.3 inch TFT LCD display.
It has three isolated outputs: two adjustable channels and one selectable channel from 2.5 V, 3.3 V, and 5 V
with output short and overload protection for each channel. Support for series and parallel operation of the two main
channels extends its flexibility beyond the standard specification. The T3PS3000 features include programmability
via USB or LAN, a graphical display of power waveforms, and the high resolution numeric display of voltage
and current. Typical users are Education, Production, and Design and Development.
FUNCTIONS AND CHARACTERISTICS
High Resolution and High Precision Output
The highest resolution of 1 mV / 1 mA provides excellent
setting and read back accuracy. This ensures accurate output even with very with small changes in voltage or current.
Series / parallel / independent output
configurations
Teledyne Test Tools T3PS3000 supports series and
parallel output configurations allowing the two main
channels to be combined into one output with more
power output capability, extending the application range.
Alternatively each output can be used independently
giving the T3PS3000 maximum configuration flexibility
and the widest range of application support.
−
−
2
+
+
Series output mode
Parallel output mode
T3PS3000 displays output waveforms
and data tables
Through front panel operation, 5 groups of timing settings
and output control settings can be displayed on the built
in color TFT LCD display, which provides users a simple
power programming function and visual indication of
output waveform shape. Further control is available via
USB or LAN connection to a PC, providing a full range of
communication and control capability.
SPECIFICATIONS
T3PSU3000
Channel
Display
Resolution
Program Accuracy
Readback Accuracy
Constant Voltage
Mode
Constant Current
Mode
Parallel Mode
Series Mode
CH3
Line Regulation
Load Regulation
Ripple & Noise
Recovery Time
Line Regulation
Load Regulation
Ripple & Noise
Line Regulation
Load Regulation
Line Regulation
Load Regulation
Output Voltage
Line Regulation
Load Regulation
Ripple & Noise
Locking Key
Memory Save / Recall
Max Output Power
Power Source
Standard Configuration Interface
Insulation
Operating Environment
Storage Environment
Dimension
Weight
CH1 output voltage: 0 ~ 32 V, output current: 0 ~ 3.2 A
CH2 output voltage: 0 ~ 32 V, output current: 0 ~ 3.2 A
CH3 output voltage: 2.5 / 3.3 / 5.0 V, output current: 3.2 A
4.3 inch color TFT-LCD
5 digits voltage 4 digits current
1 mV / 1 mA
Voltage ± (0.03 % of reading + 10 mV)
Current ± (0.3 % of reading + 10 mA)
Voltage ± (0.03 % of reading + 10 mV)
Current Current ± (0.3 % of reading +10 mA)
≤ 0.01 % + 3 mV
≤ 0.01 % + 3 mV
≤ 1 mVrms (5 Hz ~ 1 MHz)
< 50 μs (50 % load change, minimum load 0.5 A)
≤ 0.2 % + 3 mA
≤ 0.2 % + 3 mA
≤ 3 mArms
≤ 0.01 % + 3 mV
≤ 0.01 % + 3 mV
≤ 0.01 % + 5 mV
≤ 300 mV
(2.5 / 3.3 / 5 V) ± 8 %
≤ 0.01 % + 3 mV
≤ 0.01 % + 3 mV
≤ 1 mVrms (5 Hz ~ 1 MHz)
Yes
5 Sets
220 W
AC 100 V / 120 V / 220 V / 230 V ± 10 % 50/60 Hz
USB Device, LAN
Case to Terminal ≥ 20 MΩ (DC 500 V)
Case to AC line ≥ 30 MΩ (DC 500 V)
Outdoor Usage: Elevation: ≤ 2000 m, Environment Temperature 0~40 °C
Relative Humidity ≤ 80 %, Installation Level: II, Pollution Level: 2
Environment Temperature: -10 ~70 °C, Relative Humidity ≤ 70 %
225 (W) × 143 (H) × 278 (D) mm
≈ 8.0 kg
Ordering information
Product Name
Standard Accessories
T3PS3000: 3 channels independent output, min resolution 1 mV / 1 mA, USB Device & LAN,
4.3 inch LCD display
USB Cable -1
Quick Start -1
Product Certificate -1
Calibration Certificate -1
Power cord -1
Output Test Cord -2 Sets
3
ABOUT TELEDYNE TEST TOOLS
Company Profile
Teledyne LeCroy is a leading provider of oscilloscopes, protocol
analyzers and related test and measurement solutions that
enable companies across a wide range of industries to design
and test electronic devices of all types. Since our founding
in 1964, we have focused on creating products that improve
productivity by helping engineers resolve design issues
faster and more effectively. Oscilloscopes are tools used by
designers and engineers to measure and analyze complex
electronic signals in order to develop high-performance
systems and to validate electronic designs in order to improve
time to market.
The Teledyne Test Tools brand extends the Teledyne LeCroy
product portfolio with a comprehensive range of test
equipment solutions. This new range of products delivers
a broad range of quality test solutions that enable engineers
to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne
Test Tools solutions to meet their most challenging needs for
testing, education and electronics validation.
Location and Facilities
Headquartered in Chestnut Ridge, New York, Teledyne
Test Tools and Teledyne LeCroy has sales, service and
development subsidiaries in the US and throughout
Europe and Asia. Teledyne Test Tools and Teledyne LeCroy
products are employed across a wide variety of industries,
including semiconductor, computer, consumer electronics,
education, military/aerospace, automotive/industrial, and
telecommunications.
Distributed by:
Teledyne LeCroy
(US Headquarters)
700 Chestnut Ridge Road
Chestnut Ridge, NY. USA 10977-6499
Phone:
Fax Sales:
Phone Support:
Email Sales:
Email Support:
Web Site:
800-553-2769 or 845-425-2000
845-578-5985
1-800-553-2769
contact.corp@teledynelecroy.com
support@teledynelecroy.com
http://teledynelecroy.com/
Teledyne LeCroy
(European Headquarters)
Teledyne LeCroy GmbH
Im Breitspiel 11c
D-69126 Heidelberg, Germany
Phone:
Fax:
Phone Service:
Phone Support:
Email Sales:
Email Service:
Email Support:
Web Site:
+49 6221 82700
+49 6221 834655
+49 6221 8270 85
+49 6221 8270 28
contact.gmbh@teledynelecroy.com
service.gmbh@teledynelecroy.com
tlc.t3.appsupport.eu@teledyne.com
http://teledynelecroy.com/germany
teledynelecroy.com
© 2018 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product brand or brand names are trademarks or requested trademarks of their respective holders.
T3 stands for Teledyne Test Tools.