Power Supplies Datasheet
Single Output Multi-Range Power Supplies
Broad Product Range
Current: Up to 72 Amps
Voltage: Up to 800 Volts
Power: Up to 720 Watts
Tools for Improved Debugging
Multi-range operation extends the Voltage
and Current limit up to 3 times compared to
conventional supply.
Single unit covers wide Voltage and
Current Ranges.
Adjustable Slew Rates for the level transition of
both Current and Voltage.
Adjustable slew rates allows flexible output setting
in various testing conditions.
Ch1 and Ch2 support Constant Voltage and
Constant Current Operation.
Flexible voltage and current output configurations
for a broader application coverage.
●
Fully programmable via LAN and USB interface.
Full remote control extends the usability from the
bench to automated systems.
●
3 years warranty as standard.
Reliable product gives peace of mind.
●
●
●
Models and Characteristics
Models
T3PS30721P
T3PS80271P
T3PS160141P
T3PS250041P
T3PS800011P
Voltage
0 – 30 V
0 – 80 V
0 – 160 V
0 – 250 V
0 – 800 V
Current
0 – 72 A
0 – 27 A
0 – 14.4 A
0 – 4.5 A
0 – 1.44 A
Power
720 W
720 W
720 W
360 W
360 W
MULTI-OUTPUT PROGRAMMABLE DC POWER SUPPLY
The new T3PS series are single-output multi-range programmable switching DC Power Supplies
covering a power range up to 720 W. This series of products offers five models with rated
voltages of 30 V, 80 V, 160 V, 250 V and 800 V and 360 W and 720 W maximum output powers.
The multi-range feature allows for a flexible and efficient configuration of voltage and current
within the rated power range. A maximum of two units in series and a maximum of three units
in parallel can be connected for applications requiring Voltage/Current higher than the rated
output. The combination of multi-range power output feature and series/parallel operation
capability of T3PS series significantly reduces the cost by accommodating the projects with
wide range of power requirements.
The C.V/C.C priority selection of the T3PS series is
a very useful feature for DUT protection. The conventional
power supply normally operates under C.V mode when
the power output is turned on. This could bring a high
inrush current to the capacitive load or current-intensive
load at the power-On stage. Taking the I-V curve
verification of LED as an example, it becomes a very
challenging task to perform this measurement using
a conventional power supply. With LED connected to
a power supply under C.V mode as the initial setting,
when the power output is turned on and the voltage rises
to the LED forward voltage, the current will suddenly
peak up and exceed the preset value of current limit.
Upon detecting this high current, the power supply starts
the transition from C.V mode to C.C mode. Though
the current becomes stable after the C.C mode being
activated, the current spike occurred at the C.V and
C.C crossover point may possibly damage the DUT. At the
power output-on stage, the T3PS supply is capable of
operating under C.C priority to limit the current spike
occurred at the threshold voltage and protects DUT from
the inrush current damage.
2
The adjustable slew rate of the PSW-Series allows users
to set a specific rise/fall time for signal transitions of
either output voltage or output current. The adjustable
slew rate feature is useful in manufacturing tests of
lighting where a device or large capacitor during power
output-on are associated with the occurrence of high
surge current, which can greatly reduce the life time
of the DUT. To prevent inrush current from damaging
currentintensive devices, a smooth and slow voltage
transition during power On-Off can significantly reduce
the spike current and protect the device from high current
damage.
The T3PS series offers OVP and OCP. Both OVP and OCP
levels can be selected, with default level set at 110 % of
the rated voltage/current of the power supply. When any
of the protection levels is tripped, the power output will
be disabled to protect the DUT. The T3PS provides USB
Host/Device and LAN interfaces as standard. An analog
control/monitoring connector is also available on the rear
panel for external control of power On/Off and external
monitoring of power output Voltage and Current.
PANEL INTRODUCTION
720 W Models: T3PS30721P, T3PS80271P, T3PS160141P
9
7
1
6
2
4
3
8
10
13 12 11
16
5
14
Output Terminals
(30, 80, 160 volt models)
15
Output Terminals
(250, 800 volt models)
1
VoltageKnob
9
AnalogControlConnector
2
CurrentKnob
10 USBBPort
3
OutputKey
11 OutputTerminal(+)
4
FunctionKeys
12 SenseTerminal(+/-)
5
USBAPort
13 OutputTerminal(-)
6
Display
14 Fan
7
CoverPanel
15 ACInput
8
PowerSwitch
16 LANPort
Features
●
●
●
360 W Models: T3PS250041P, T3PS800011P
●
●
●
●
VoltageRating:30V/80V/
160V/250V/800V,
OutputPowerRating:
360W– 720W
Multi-rangeVoltage&Current
CombinationsinOnePower
Supply
C.V/C.CPriority;Particularly
SuitablefortheBatteryandLED
IndustryAdjustableSlewRate
SeriesOperation(2unitsin
Series),ParallelOperation
(3unitsinParallel)
HighEfficiencyandHigh Power
Density
1/6,1/3RackMountSize
Design(EIA/JISStandard)
for 360W,720W
StandardInterface:LAN,USB,
AnalogControlInterface
3
FEATURES
A.
MULTI-RANGE OPERATION
Operating areas of 360 W Models: T3PS250041P, T3PS800011P
Operating areas of 720 W Models: T3PS30721P, T3PS80271P, T3PS160141P
Whenthepowersupplyisconfiguredsothatthetotaloutput(currentxvoltageoutput)islessthantheratedpower
output,thepowersupplyfunctionsasatypicalconstantcurrent,constantvoltagepowersupply.Ifhowever,the
power supplyisconfiguredsuchthatthetotaloutput(currentxvoltageoutput)exceedstheratedpoweroutput,the
effectiveoutputisactuallylimitedtothepowerlimitortheoperatingareaoftheunit.Inthiscasetheoutputcurrentand
voltagethendependpurelyontheloadvalue.Thegraphsabovedisplaytheoperatingareasofeachpowersupply.
B.
ADJUSTABLE SLEW RATE
C.
T3PS
Slew rate=
Disabled
Slew rate =
Enabled
TheT3PShasselectableslewratesforCCandCVmode.
ThisgivestheT3PSpowersupplytheabilitytolimitthe
current/voltagedrawofthepowersupply.Slewrate
settingsaredividedintoHighSpeedPriorityandSlew
RatePriority.HighSpeedPrioritymodedisablesslew
ratesettingsforCCorCVmode.SlewRatePrioritymode
allowsforuseradjustableslewratesforCCorCVmode.
The risingandfallingslewratecanbesetindependently.
BLEEDER CONTROL
Bleed
resistor
Load
TheT3PSDCpowersuppliesemployableedresistor
inparallelwiththeoutputterminals.Bleedresistorsare
designedtodissipatethepowerfromthepowersupply
filtercapacitorswhenpoweristurnedoffandtheloadis
disconnected.Withoutableedresistor,powermayremain
chargedonthefiltercapacitorsforsometimeandbe
potentiallyhazardous.
Inaddition,bleedresistorsalsoallowforsmoothervoltage
regulationofthepowersupplyasthebleedresistoracts
asaminimumvoltageload.
Thebleedresistancecanbeturnedonoroffusingthe
configurationsettings.
4
SPECIFICATIONS
T3PS30721P
T3PS80271P
T3PS160141P
T3PS250041P
T3PS800011P
0 – 30 V
0 – 72 A
720 W
0 – 80 V
0 – 27 A
720 W
0 –160 V
0 –14.4 A
720 W
0 – 250 V
0 – 4.5 A
360 W
0 – 800 V
0 – 1.44 A
360 W
20 mV
18 mV
45 mV
43 mV
85 mV
83 mV
130 mV
128 mV
405 mV
403 mV
77 mA
77 mA
32 mA
32 mA
19.4 mA
19.4 mA
9.5 mA
9.5 mA
6.44 mA
6.44 mA
Output Rating
Voltage
Current
Power
Regulation(CV)
Load
Line
Regulation(CC)
Load
Line
Ripple & Noise (Noise Bandwidth 20 MHz; Ripple Bandwidth = 1 MHz)
CVp-p
CV rms
CC rms
80 mV
11 mV
144 mA
80 mV
11 mV
54 mA
80 mV
15 mV
30 mA
80 mV
15 mV
10 mA
150 mV
30 mV
5 mA
0.1 % + 10 mV
0.1 % + 30 mA
0.1 % + 100 mV
0.1 % + 15 mA
0.1 % + 200 mV
0.1 % + 5 mA
0.1 % + 400 mV
0.1 % + 2 mA
0.1 % + 10 mV
0.1 % + 60 mA
0.1 % + 10 mV
0.1 % + 30 mA
0.1 % + 100 mV
0.1 % + 15 mA
0.1 % + 200 mV
0.1 % + 5 mA
0.1 % + 400 mV
0.1 % + 2 mA
50 ms
50 ms
500 ms
1 ms
50 ms
50 ms
500 ms
1 ms
100 ms
100 ms
1000 ms
2 ms
100 ms
150 ms
1200 ms
2 ms
150 ms
300 ms
2000 ms
2 ms
3 mV
2 mA
5 mV
1 mA
14 mV
1 mA
3 mV
2 mA
5 mV
1 mA
14 mV
1 mA
Up to 3 units including the master unit
Up to 2 units including the master unit
3
N/A
3
N/A
3 – 33 V
8 – 88 V
16 – 176 V
5 – 79.2 A
2.7 – 29.7 A
1.44 – 15.84 A
Activated by elecated internal temperatures
20 – 275 V
0.45 – 4.95 A
20 – 880 V
0.144 – 1.584 A
Programming Accuracy
Voltage
Current
0.1 % + 10 mV
0.1 % + 60 mA
Measurement Accuracy
Voltage
Current
Response Time
Rise Time
Fall Time (Full Load)
Fall Time (No Load)
Load Transient
Recover Time
(Load change from 50–100 %)
Programming Resolution (PC Remote Control Mode)
Voltage
Current
1 mV
2 mA
2 mV
2 mA
Measurement Resolution (PC Remote Control Mode)
Voltage
Current
1 mV
2 mA
2 mV
2 mA
Series and Parallel Capability
Parallel Operation
Series Operation
Protection Function
OVP
OCP
OHP
5
SPECIFICATIONS
T3PS30721P
T3PS80271P
T3PS160141P
T3PS250041P
T3PS800011P
0.1 % ± 20 mV
0.1 % ± 40 mA
0.1 % ± 100 mV
0.1 % ± 30 mA
0.1 % ± 200 mV
0.1 % ± 5 mA
0.1 % ± 400 mV
0.1 % ± 2 mA
Front Panel Display Accuracy, 4 digits
Voltage
Current
0.1 % ± 20 mV
0.1 % ± 70 mA
Environment Condition
Operation Temp
Storage Temp
Operating Humidity
Storage Humidity
0 °C – 50 °C
-25 °C – 70 °C
20 % – 85 % RH; No condensation
90 % RH or Less; No condensation
Read Back Temp Coefficient
Voltage
Current
100 ppm / °C of rated output voltage: after 30 minutes of warm-up
200 ppm / °C of rated output voltage: after 30 minutes of warm-up
Other
Analog Control
Interface
Fan
Power Source
Dimensions & Weight
Yes
USB/LAN
With thermal sensing control single
85 VAC ~ 265 VAC, 47 ~ 63 Hz, single phase
142 (W) x 124 (H) x 142 (W) x 124 (H) x 142 (W) x 124 (H) x 71 (W) x 124 (H) x
350 (D) mm;
350 (D) mm;
350 (D) mm;
350 (D) mm;
Approx 5.3 kg
Approx 5.3 kg
Approx 5.3 kg
Approx 3 kg
71 (W) x 124 (H) x
350 (D) mm;
Approx 3 kg
Ordering Information
Model
Accessories
T3PS30721P
(0–30 V / 0–72 A / 720 W)
Multi-Range DC Power Supply
T3PS80271P
(0–80 V / 0–27 A / 720 W)
Multi-Range DC Power Supply
T3PS160141P
(0–160 V / 0–14.4 A / 720 W) Multi-Range DC Power Supply
T3PS250041P
(0–250 V / 0–4.5 A / 360 W) Multi-Range DC Power Supply
T3PS800011P
(0–800 V / 0–1.44 A / 360 W) Multi-Range DC Power Supply
Power cord, Output terminal cover, Test leads: 1x red, 1x black, USB Cable
T3PS30721P,
Basic Accessory Kit: M4 terminal screws and washers x2, M8 terminal bolts,
T3PS80271P,
nuts and washers x2, Air filter x1, Analog control protection dummy x1,
T3PS160141P
Analog control lock level x1
T3PS250041P,
Basic Accessory Kit: Air filter x1, Analog control protection dummy x1,
T3PS800011P
Analog control lock level x1
Warranty: 3 Years return to Teledyne LeCroy.
6
ABOUT TELEDYNE TEST TOOLS
Company Profile
Teledyne LeCroy is a leading provider of oscilloscopes, protocol
analyzers and related test and measurement solutions that
enable companies across a wide range of industries to design
and test electronic devices of all types. Since our founding
in 1964, we have focused on creating products that improve
productivity by helping engineers resolve design issues
faster and more effectively. Oscilloscopes are tools used by
designers and engineers to measure and analyze complex
electronic signals in order to develop high-performance
systems and to validate electronic designs in order to improve
time to market.
The Teledyne Test Tools brand extends the Teledyne LeCroy
product portfolio with a comprehensive range of test
equipment solutions. This new range of products delivers
a broad range of quality test solutions that enable engineers
to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne
Test Tools solutions to meet their most challenging needs for
testing, education and electronics validation.
Location and Facilities
Headquartered in Chestnut Ridge, New York, Teledyne
Test Tools and Teledyne LeCroy has sales, service and
development subsidiaries in the US and throughout
Europe and Asia. Teledyne Test Tools and Teledyne LeCroy
products are employed across a wide variety of industries,
including semiconductor, computer, consumer electronics,
education, military/aerospace, automotive/industrial, and
telecommunications.
Distributed by:
Teledyne LeCroy
(US Headquarters)
700 Chestnut Ridge Road
Chestnut Ridge, NY. USA 10977-6499
Phone:
Fax Sales:
Phone Support:
Email Sales:
Email Support:
Web Site:
800-553-2769 or 845-425-2000
845-578-5985
1-800-553-2769
contact.corp@teledynelecroy.com
support@teledynelecroy.com
http://teledynelecroy.com/
World wide support contacts can be found at:
https://teledynelecroy.com/support/contact
World wide instrument service can be found at:
https://teledynelecroy.com/support/service.aspx
RoHS and WEEE information can be found at:
https://teledynelecroy.com/support/rohs.aspx
Teledyne LeCroy
(European Headquarters)
Teledyne GmbH
Im Breitspiel 11c
D-69126 Heidelberg, Germany
Phone:
Fax:
Phone Service:
Phone Support:
Email Sales:
Email Service:
Email Support:
Web Site:
+49 6221 82700
+49 6221 834655
+49 6221 8270 85
+49 6221 8270 28
contact.gmbh@teledynelecroy.com
service.gmbh@teledynelecroy.com
tlc.t3.appsupport.eu@teledyne.com
http://teledynelecroy.com/
teledynelecroy.com
© 2023 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.
Product brand or brand names are trademarks or requested trademarks of their respective holders.
T3 stands for Teledyne Test Tools.
12jan23