T3PS43203

Power Supplies Data Sheet Triple and Quad Output Broad Product Range Current: Up to 12 Amps Voltage: Up to 120 Volts Power: Up to 375 Watts Tools for Improved Debugging ● 6 Models to choose from. More choice for better application coverage. ● Triple and Quad output models. Single and Dual output models available in our Single and Dual output model brochure. ● Programmable and non-programmable models available. Selection of bench or programmable / ATE instruments. ● All power supplies support Constant Voltage and Constant Current modes (C.V. and C.C. modes) Multiple independent modes per output supports a wider range of applications. ● All models support independent, series and parallel output modes. Support for the maximum output configuration flexibility. Models and Characteristics T3PS3000 0-32V / 0-32V / 2.5V, 3.3V, 5V T3PS33203 0-32V / 0-32V / 5V T3PS33203P T3PS36006(1) T3PS43203 T3PS43203P 0-32V / 0-32V / 1.8V, 2.5V, 3.3V, 5V 0-30V / 0-30V / 0.1-5V 0-32V / 0-32V / 0-15V / 0-5V 0-32V / 0-32V / 0-15V / 0-5V 1. See page 2 for additional specifications. 0-3.2A / 0-3.2A / 0-3.2A 0-3A / 0-3A / 0-5A 0-3A / 0-3A / 0-5A 0-6A / 0-6A / 0-3A 0-3A / 0-3A / 0-1A / 0-1A 0-3A / 0-3A / 0-1A / 0-1A 220 W Programmable 207 W 207 W Programmable 375 W 212 W 212 W Programmable SPECIFICATIONS Models and Specifications T3PS3000 T3PS33203 T3PS33203P T3PS36006 T3PS43203 T3PS43203P Number of Channels 3 3 3 3 4 4 Voltage Range Ch1: 0-32 V 0-32 V 0-32 V 0-30 V / 0-60 V 0-32 V 0-32 V Ch2: 0-32 V 0-32 V 0-32 V 0-30 V / 0-60 V 0-32 V 0-32 V 5V + 5% (fixed) 1.8V, 2.5V, 3.3V, 5V +/- 5% 0.1-5 V 0-15 V 0-15 V - - - - 0-5V 0-5V Current Range Ch1: 0-3.2 A 0-3 A 0-3 A 0-6 A / 0-3 A 0-3 A 0-3 A Ch2: 0-3.2 A 0-3 A 0-3 A 0-6 A / 0-3 A 0-3 A 0-3 A Ch3: 0-3.2 A 0-5 A 0-5 A 0-3 A 0-1 A 0-1 A Ch4: - - - - 0-1 A 0-1 A 220 W 207 W 207 W 375 W 212 W 212 W Line Regulation Ch1 / Ch2: < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV Ch3: < 0.01% + 3 mV < 3 mV < 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV Ch4: Ch3: 2.5V, 3.3V, 5V + 8% Ch4: Maximum Power Constant Voltage - - - - < 0.01% + 3 mV < 0.01% + 3 mV Load Regulation Ch1 / Ch2: < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 3 mV < 0.01% + 5 mV < 0.01% + 3 mV < 0.01% + 3 mV Ch3: < 0.01% + 3 mV < 5 mV < 5 mV < 0.01% + 5 mV < 0.01% + 3 mV < 0.01% + 3 mV Ch4: - - - - < 0.01% + 3 mV < 0.01% + 3 mV < 1 mV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 350 uV rms (5 Hz - 1 MHz) < 2 mV rms (5 Hz - 1 MHz) < 5 mV rms (5 Hz - 1 MHz) < 5 mV rms (5 Hz - 1 MHz) - - - - < 1 mV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 350 uV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 1 mV rms (5 Hz - 1 MHz) < 50 us < 100 us < 50 us < 100 us < 100 us < 50 us Line Regulation < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA Load Regulation < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA < 0.2% + 3 mA Ripple & Noise < 3 mA rms < 3 mA rms < 2 mA rms < 3 mA rms < 3 mA rms < 2 mA rms Series Tracking 0-64 V 0-64 V 0-64 V 0-120 V 0-64 V 0-64 V Parallel Tracking 0-6.4 A 0-6A 0-6 A 0-12 A 0-6 A 0-6 A Programmable Yes No Yes No No Yes Technology Linear Linear Linear Switching Linear Linear Product Style D B A C B A Ripple & Noise Ch1 / Ch2: Ch3: Ch4: Recovery Time (50% Load Change, minimum load 0.5 A) Constant Current Other Notes T3PS3000: Ch3 is switchable between 2.5V, 3.3V and 5V. T3PS33203: Ch3 is a fixed 5V output. T3PS33203P: Ch3 is switchable between 1.8V, 2.5V, 3.3V and 5V. T3PS36006: Ripple & Noise < 50 mVpk-pk (20Hz to 20 MHz). Ch1 and Ch2 can output 0-30V at 0-6A or 0-60V at 0-3A before applying series or parallel tracking. Form Factor Product Style A Product Style B Dimensions: 213mm wide, 145mm high, 312mm deep. Weight 7.5kg Approx. Dimensions: 210mm wide, 155mm high, 306mm deep. Weight 7kg Approx. Product Style C Product Style D Dimensions: 255mm wide, 145mm high, 265mm deep. Weight 6kg Approx. Dimensions: 225mm wide, 143mm high, 278mm deep. Weight 8kg Approx. PRODUCT OVERVIEW The T3PS3XXXX and T3PS4XXXX Series are a range of triple and quad output power supplies offering a range of voltage and current levels up to 375 Watts. All models offer series and parallel tracking mode whereby Ch1 and Ch2 outputs can function independently of one another, or in parallel or series mode. In independent mode the two outputs function completely independently of one another, as two separate outputs. In parallel mode the two outputs act as a single output giving the standard output voltage range but with the two output current values added together giving twice the output current. In series mode the two outputs again act as a single output but now outputting twice the voltage allowing higher voltages to be reached at the normal current level. The Linear technology power supplies deliver exceptionally low Ripple & Noise, Line and Load regulation, fast load change recovery time, and are fully programmable down to 1mV or 1mA resolution (programmable models only). The advanced design of the switching technology power supplies offer the highest power density whilst reaching performance levels approaching that of a Linear power supply. Ordering Information Models and Characteristics T3PS3000 0-32V / 0-32V / 2.5V, 3.3V, 5V T3PS33203 0-32V / 0-32V / 5V T3PS33203P T3PS36006 T3PS43203 T3PS43203P 0-32V / 0-32V / 1.8V, 2.5V, 3.3V, 5V 0-30V / 0-30V / 0.1-5V 0-32V / 0-32V / 0-15V / 0-5V 0-32V / 0-32V / 0-15V / 0-5V 0-3.2A / 0-3.2A / 0-3.2A 0-3A / 0-3A / 0-5A 0-3A / 0-3A / 0-5A 0-6A / 0-6A / 0-3A 0-3A / 0-3A / 0-1A / 0-1A 0-3A / 0-3A / 0-1A / 0-1A 220 W Programmable 207 W 207 W Programmable 375 W 212 W 212 W Programmable Each power supply comes complete with a power cord, connection leads and includes a 3 Year return to Teledyne LeCroy warranty. Notes T3PS3000: Ch3 is switchable between 2.5V, 3.3V and 5V. T3PS33203: Ch3 is a fixed 5V output. T3PS33203P: Ch3 is switchable between 1.8V, 2.5V, 3.3V and 5V. T3PS36006: Ch1 and Ch2 can output 0-30V at 0-6A or 0-60V at 0-3A before applying series or parallel tracking. In series tracking mode the T3PS36006 offers 0-120V at 0-3A, in parallel tracking mode the T3PS36006 offers 0-30V at 0-12A. All power supplies support Constant Voltage and Constant Current modes. ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Teledyne LeCroy (US Headquarters) Location and Facilities 700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Phone: 800-553-2769 or 845-425-2000 Fax Sales: 845-578-5985 Phone Support: 1-800-553-2769 Email Sales: contact.corp@teledynelecroy.com Email Support: support@teledynelecroy.com Web Site: http://teledynelecroy.com/ World wide support contacts can be found at: h�ps://teledynelecroy.com/support/contact Distributed by: World wide instrument service can be found at: h�ps://teledynelecroy.com/support/service.aspx RoHS and WEEE informa�on can be found at: h�ps://teledynelecroy.com/support/rohs.aspx teledynelecroy.com © 2018 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications,prices,availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools. 15May2019