T3VNA-EMI

T3VNA1500 Data Sheet 1.5 GHz Vector Network Analyzer Broad Measurement Range Frequency Range: 9 kHz to 1.5 GHz Tools for Improved Debugging Vector Network Analyser, Spectrum Analyser and Distance To Fault modes.  More application coverage from a single instrument. -156 dBm/Hz Displayed Average Noise Level (Typ.)  View and measure very small signals. -98 dBc/Hz @ 10 kHz Offset Phase Noise (1 GHz, Typ.)  Improved specification gives more accurate measurement results. Optional EMI Pre-compliance Test Kit Optional Modulation Analysis Mode  Make EMI Receiver measurements to CISPR 16-1-1 Add Vector Signal Modulation Analysis measurements. ●● Built-in switchable pre-amplifier.  Integrated pre-amplifier allows higher sensitivity measurements. ●● 10.1 inch (25.65 cm) color WVGA 1024 x 600 display.  Clear and flexible display aids ease of use. ●● USB Device, USB Host and LAN support.  Remote control your measurements. ●● ●● ●● ●● Key Specifications Model T3VNA1500 Vector Network Analyser Frequency Range 10 MHz to 1.5 GHz Spectrum Analyser Frequency Range 9 kHz to 1.5 GHz Resolution Bandwidth 1 Hz to 1 MHz Displayed Average Noise Level -156 dBm /Hz Phase Noise < -98 dBc/Hz Total Amplitude Accuracy < 1.2 dB PRODUCT OVERVIEW Teledyne Test Tools T3VNA1500 Vector Network Analyzer consists of a model with Vector Network Analysis frequency range from 10 MHz to 1.5 GHz and Spectrum Analysis frequency range from 9 kHz to 1.5 GHz. The small footprint and easy user interface is augmented by a high performance specification with many advanced measurement functions and capabilities. The high performance Vector Network Analysis capability is enhanced further by the full featured Spectrum Analysis capability. Options can be added to further extend it’s measurement capability. ●● ●● ●● Optional EMI Pre-compliance test kit: Add EMI Receiver Measurements following CISPR 16-1-1. Features and Benefits ●● ●● ●● -156 dBm/Hz Displayed Average Noise Level (Typ.) ●● -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) ●● Optional Analog Modulation Analysis function of AM and FM. Total Amplitude Accuracy < 1.2 dB ●● 1 Hz Minimum Resolution Bandwidth (RBW) ●● All-Digital IF Technology ●● Standard Preamplifier ●● ●● ●● Typical Applications ●● Research Laboratory ●● Development Laboratory ●● Repair and Maintenance ●● Calibration Laboratory ●● Automatic Production Test ●● General bench-top use User-friendly Design ●● 10.1 inch (25.65 cm) 1024*600 display ●● Intuitive, easy to use menu system ●● “Preset” and “Auto Tune” for quick set up ●● Built-in front panel accessible help system ●● 2 Spectrum Analyser Frequency Range from 9 kHz up to 1.5 GHz Optional Digital Modulation Analysis function of ASK, FSK, MSK, PSK, QAM. Teledyne Test Tools vector network analyzer offers comprehensive measurement capabilities even in the base unit. The enhancement options support the user when conducting more complex measurements and make daily measurement tasks easier and faster. ●● Vector Network Analyser Frequency Range from 10 MHz up to 1.5 GHz File management (support for U-disc and local storage) Lightweight, small footprint, easy to transport Distance to fault capability using VNA time domain analysis Up to 1.5 GHz Tracking Generator Kit Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc) ●● EMI Pre-compliance Test Kit (Opt.) ●● 10.1 lnch WVGA (1024 x 600) Display DESIGN FEATURES Vector Network Analyser Mode 10 MHz to 1.5 GHz, multi-format overlay display Distance to Fault Mode based on time domain analysis Optional CISPR-1-1 EMI filter and Quasipeak Detector Optional Vector Signal Modulation Analysis Modes Phase noise -98 dBc/Hz @1 GHz, offset 10 kHz Minimum 1 Hz Resolution Bandwidth Adjacent Channel Power Ratio (ACPR) in advanced measurement mode 2D Time – Frequency spectrogram in advanced measurement mode 3 DESIGN FEATURES Vector Network Analyzer Frequency Range Spectrum Analyzer Frequency Range Resolution Bandwidth Displayed Average Noise Level Phase Noise Total Amplitude Accuracy Tracking Generator Touch Screen Advanced Measurement Vector Network Analysis Distance to Fault Modulation Analysis EMI Test Communication Interface Remote Control Capability Remote Controller T3VNA1500 10 MHz ~ 1.5 GHz 9 kHz ~ 1.5 GHz 1 Hz ~ 1 MHz -156 dBm/Hz 50MHz > 40 dB S21, IFBW = 10 kHz, Port1 level = -5 dBm, Log Mag, Average = 50 100 kHz ~ 10 MHz 75 dB 10 MHz ~ 1.5 GHz 60 dB 10 kHz RBW, Log mag, Average = 50, >10 MHz < 0.1 dB rms Full 1-Port(OSL), Open Response, Short Response Response Through, Enhanced Response, Open, Short, Load, Through; User Cal Kit Port 1, Port 2, Auto Open Port 1 50 Ω 0.1 ~ 1 Spectrum Analyzer Mode Frequency Frequency range Frequency resolution Frequency Span Range Accuracy Internal Reference Source Reference frequency Reference frequency accuracy / uncertainty Initial calibration accuracy Temperature stability Frequency aging rate Marker Marker resolution Marker uncertainty Freq Counter resolution Bandwidths Resolution bandwidth (-3 dB) Resolution filter shape factor RBW uncertainty Video bandwidth (-3 dB) VBW uncertainty 9 kHz – 1.5 GHz 1 Hz 0 Hz, 100 Hz to Max Frequency ± Span / (number of display points - 1) 10.000000 MHz ± [(time since last adjustment × frequency aging rate) + temperature stability + initial calibration accuracy] D < 2 (nom.) N-type female, 50 Ω Total : 30 dBm (1 W) Voltage: ±50 VDC EMI Filter and Quasi-Peak Detector Kit (Option T3VNA-EMI) Measurement EMI filter RBW (-6 dB) Detector QPD Dwell time Frequency axis 200 Hz, 9 kHz, 120 kHz, 1MHz (following CISPR 16-1-1) Peak, Average, RMS, Quasi-peak (following CISPR 16-1-1) 0 µs ~ 10 s Linear, Logarithmic 7 SPECIFICATIONS Analog Modulation Analysis (Option T3VNA-AMA) T3VNA1500 AM Modulation rate range Accuracy Modulation depth range Accuracy FM Modulation rate range Accuracy Frequency deviation Accuracy 20 Hz to 100 kHz 1 Hz (nom.) < 0.1 % modulation rate (nom.) 5 % to 95 % ±4 % (nom.) 20 Hz to 200 kHz 1 Hz (nom.) < 0.1 % modulation rate (nom.) 1 kHz to 400 kHz ±4 % (nom.) Modulation rate < 1 kHz Modulation rate ≥ 1 kHz Modulation rate < 1 kHz Modulation rate ≥ 1 kHz Digital Modulation Analysis (Option T3VNA-DMA) Measurement Modulation Type Meas Length Points/Symbol Symbol Rate Filter Meas/Ref Filter Length Alpha/BT Trace Trace Data Layout Trace Formats Symbol Error Chart PSK/DPSK/MSK/QAM ASK FSK 8 ASK: 2ASK; FSK: 2, 4, 8, 16 level; MSK: GMSK; PSK: BPSK, QPSK, OQPSK, 8PSK; DPSK: DBPSK, DQPSK, D8PSK, π/4-DQPSK, π/8-D8PSK; QAM: 16, 32, 64, 128, 256 16 to 4096 4, 6, 8, 10, 12, 14, 16 1 ksps to 2.5 Msps, Symbol Rate* Points/Symbol 0 dBm, 50 Ω, BNC-female B 10 MHz, -5 dBm ~ +10 dBm, 50 Ω, BNC-female C 1 kΩ, 5 V TTL , BNC-female D Kensington Lock point Communication Interface USB Host Device LAN USB-A 2.0 + USB E USB-B 2.0 F LAN (VXI11), 10/100 Base, RJ-45 General Specification Display Storage Source Temperature Humidity Dimensions Weight Warrenty TFT LCD, 1024 × 600 (waveform area 751 × 501), 10.1 inch (25.65 cm) Internal (Flash) 256 MByte, External (USB storage device) 32 GByte Input voltage range (AC) 100 V ~ 240 V, AC frequency supply 50/60 Hz or 100– 120V 400 Hz, Power consumption 35 W Working temperature 0°C to 40 °C, Storage temperature -20 °C to 70 °C 0 °C to 30 °C, ≤ 95 % Relative humidity; 30 °C to 50 °C, ≤ 75 % Relative humidity 393 mm × 207 mm × 116.5 mm (W × H × D) 4.40 kg (9.7 lb) 3 years return to Teledyne LeCroy Electromagnetic Compatibility and Safety EMC Electrical safety EN 61326-1:2013 EN 61010-1:2010 E F B A C D 10 Ordering Information Product Description Product code Standard configurations EMI Options Modulation Analysis Options T3VNA1500 Vector Network Analyser Vector Netwok Analyser, 9 kHz ~ 1.5 GHz A Quick Start, A USB Cable, A Calibration Certificate, Power cord EMI Measurement Kit: EMI Filter and Quasi Peak Detector Near Field Probe: H field probe sets (25 mm, 10 mm, 5 mm, 2 mm), 30 MHz ~ 3.0 GHz Digital Modulation Analysis: ASK, FSK, MSK, PSK, QAM Analog Modulation Analysis: AM, FM Order Number T3VNA1500 T3VNA-EMI T3SA3000-NFP T3VNA-DMA T3VNA-AMA 11 ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Location and Facilities Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Distributed by: Teledyne LeCroy (US Headquarters) 700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Phone: Fax Sales: Phone Support: Email Sales: Email Support: Web Site: 800-553-2769 or 845-425-2000 845-578-5985 1-800-553-2769 contact.corp@teledynelecroy.com support@teledynelecroy.com http://teledynelecroy.com/ World wide support contacts can be found at: https://teledynelecroy.com/support/contact World wide instrument service can be found at: https://teledynelecroy.com/support/service.aspx RoHS and WEEE information can be found at: https://teledynelecroy.com/support/rohs.aspx Teledyne LeCroy (European Headquarters) Teledyne LeCroy GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: Fax: Phone Service: Phone Support: Email Sales: Email Service: Email Support: Web Site: +49 6221 82700 +49 6221 834655 +49 6221 8270 85 +49 6221 8270 28 contact.gmbh@teledynelecroy.com service.gmbh@teledynelecroy.com tlc.t3.appsupport.eu@teledyne.com http://teledynelecroy.com/ teledynelecroy.com © 2019 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools. 23oct19