WSXS-A-FP-FRENCH

WaveSurfer® MXs-B and MSO MXs-B Oscilloscopes 200 MHz – 1 GHz Key Features WaveSurfer® MXs-B • 200 MHz, 400 MHz, 600 MHz and 1 GHz Bandwidths • Up to 10 GS/s Sample Rate • 16 Mpts/Ch Memory, 32 Mpts Interleaved • Fast Processing of Long Memory and Math • Responsive User Interface • WaveStream™ Fast Viewing Mode • WaveScan™ – Advanced The WaveSurfer® MXs-B and MSO MXs-B oscilloscopes pack high performance hardware, powerful waveform processing and advanced math, measurement and debug tools into a compact form factor with a large touch screen display and intuitive user interface. Search and Find With up to 10 GS/s sample rate and System debug often requires more 32 Mpts of memory WaveSurfer can than analog channels. The MSO capture large amounts of data at MXs-B delivers 18 digital channels very high sample rates. Other which can capture digital signals of oscilloscopes offer long memory but up to 250 MHz. The MSO MXs-B they bog down trying to process or offer analog and digital cross-trig- MSO MXs-B display it. WaveSurfer handles large gering plus measurement tools to All the great features of the WaveSurfer MXs-B plus: amounts of data quickly providing help debug digital busses. Teledyne fast processing of long memory even LeCroy’s WaveScan™ search and find • 18 Digital Channels when using math and measurement tool will scan both analog and digital functions. The software responds channels for anamolies plus scan immediately to the user inputs even multiple digital lines for a parallel while processing data. bus pattern. • LabNotebook Documentation and Report Generation • 10.4” Touch Screen Display • LXI Compliant • Max. Digital Signal Speed of 250 MHz • Analog and Digital Cross Pattern Triggering Touch Screen Simplicity New Surfer image Don’t waste time searching through a complex menu opened. Measurements can be touched to adjust their structure to find the proper setting. Configuring the Wave- settings and cursors can be positioned precisely by touch- Surfer is simple thanks to the intuitive touch screen user ing and dragging them to the proper location. A box can be interface. Everything on the screen is interactive. To adjust drawn around a portion of a waveform to create a zoom of channel, timebase, or trigger settings, simply touch the that waveform. Even waveform offset and delay can be associated descriptor box and the appropriate menu is adjusted simply by touching and dragging the waveform. 2 Advanced Tools for Waveform Analysis Embedded Controller Design and Debug Save time when working with embedded controllers by adding high-performance mixed signal capability with the MSO MXs-B. Capture digital signals up to 250 MHz with up to 10 Mpts/Ch memory, 1 GS/s and 18 channels. Quickly and easily isolate specific serial data events with optional I2C, SPI, UART, RS-232, USB 1.0/1.1/2.0, USB2-HSIC, 10/100Base T ENET, Audio (I2S, LJ, RJ, TDM), MIL-STD-1553, ARINC 429, MIPI D-PHY, DigRF, CAN, LIN, FlexRay™, SENT, Manchester, and NRZ trigger and decode options. WaveScan Advanced Search and Find Tool LabNotebook Documentation and Report Generation Tool Simple Power Measurements Quickly search waveforms for Save all results and data with a characteristics of power conversion runts, glitches or other anomalies single button press and create devices and circuits. with WaveScan. custom reports with LabNotebook. Sequence Mode Acquisition Advanced Math and Measure Capture many fast pulses in Use automatic measurement param- WaveStream Fast Viewing Mode quick succession or events sepa- eters with statistics and histicons WaveStream provides a vibrant, rated by long periods of time. as well as math functions to under- intensity graded (256 levels) display stand every waveform detail. with a fast update to closely Measure and analyze operating simulate the look and feel of an analog oscilloscope. 3 Intuitive User Interface to Find Problems Faster 2 3 The WaveSurfer MXs-B and MSO MXs-B oscilloscopes makes everyday testing simpler and easier. The intuitive user interface and streamlined front panel make it easy to turn on the oscilloscope and start making measurements. The interface is designed so that all the common measurements and functions are just one touch away. 1. Only 15 cm (6”) Deep The most space-efficient oscilloscope for your bench from 200 MHz to 1 GHz. 2. Local Language User Interface Select from 10 language ­preferences. Add a front panel overlay with your local language. 3. Bright 10.4” Display You’ll never use a small display oscilloscope again. A fantastic viewing angle makes it easy to view. 1 44 6 4. “Push” Knobs Trigger level, delay, and offset knobs all provide shortcuts to common a­ ctions when pushed. 4 5. Zoom Control Knobs Navigate zoom or math traces with the multiplexed horizontal knobs. 6. WaveStream Fast Viewing Mode 5 Provides a lively, analog-like feel similar to a phosphor trace. Adjust “trace” intensity with the front panel 7 control, or toggle between WaveStream and real-time modes. 7. Dedicated Cursor Knobs Select type of cursor, position them on your signal, and read values without ever opening a menu. 8. Touch Screen with Built-in Stylus The most time-efficient user interface is even 8 easier to use with a built-in stylus. Document and Share: • Quickly save all files with LabNotebook • Create custom reports with LabNotebook • Save to internal hard drive or network drive • Print to a USB printer • Save to USB memory stick • Connect with LAN or GPIB • View data on a PC with free WaveStudio utility 5 Identify and Isolate Problems Faster Advanced Waveform Capture with Sequence Mode Use Sequence mode to store up to 5,000 triggered events as “segments” into memory. This can be ideal when capturing many fast pulses in quick succession or when capturing events separated by long time periods. Sequence mode provides timestamps for each acquisition and minimizes dead-time between triggers to less than 1 μ­s. Combine Sequence mode with advanced triggers to isolate rare events over time and analyze afterwards. WaveStream Fast Viewing Mode WaveStream provides a vibrant, intensity graded (256 levels) display WaveScan Advanced Search WaveScan provides powerful isolation capabilities that hardware triggers can’t provide. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search), or “scan” for an event in many acquisitions over a long period of time. Select from more than 20 search modes to find events on any analog or digital channel or search for a pattern across multiple digital channels. Since the scanning “modes” are not hours or days, enabling faster debug- simply copies of the hardware ­trig­gers, ging. When used in multiple acquisi- the utility and ­capa­bility is much higher. tions, WaveScan builds on the For instance, there is no “frequency” ­traditional Teledyne LeCroy strength trigger in any oscilloscope, yet of fast ­processing of data. A Teledyne ­WaveScan allows for “frequency” LeCroy X-Stream oscilloscope will to be quickly “scanned.” This allows quickly scan millions of events look- the user to accumulate a data set of ing for unusual occurrences, and do it unusual events that are separated by much faster and more efficiently than other oscilloscopes can. 6 with fast update rate to simulate the look and feel of an analog oscilloscope. WaveStream is helpful for seeing jitter or identifying unusual events. With sampling rate as high as 10 GS/s WaveStream is an excellent runt or glitch finder. LabNotebook™ A Unique Tool for Documentation and Report Generation The LabNotebook feature of WaveSurfer MXs-B and MSO MXs-B provides a report generation tool to save and document all your work. Saving all displayed waveforms, relevant settings, and screen images is all done through LabNotebook, eliminating the need to navigate multiple menus to save all these files independently. One-touch Functionality Save You r Work Waveform print er V/div T/div Memory Length Sample Rate Measurement Math Hard Drive usb Drive oscilloScope Set Up email Reca ll Jo b s FLASHBACK FLASHBACK FLASHBACK Doc o rk Your W t n e um LabNotebook Screen Dump Easy report generation helps you share your findings and communicate important results. LabNotebook adds a simple way to report your work and save all essential waveforms, settings, and screen images. Quickly save all the necessary files with LabNotebook in a single button press. Recall your settings from any report by using the Flashback capability. The touch screen and stylus allow for easy annotation of the screen. LabNotebook allows you to add freehand text and graphics in multiple colors along with printed text and arrows to help identify important parts of your waveforms and measurements. Annotated screen captures can be included in custom reports. 7 Embedded Controller Design and Debug Teledyne LeCroy’s versatile MSO MXs-B mixed signal oscilloscope combines the powerful WaveSurfer MXs-B with the flexibility of digital inputs using the MS-250. In addition, the many triggering and decoding options turn the MSO MXs-B into an all-in-one analog, digital, and serial data trigger, acquisition, and debug machine. High-performance Mixed Signal Capabilities Extensive Triggering The MSO MXs-B has extensive digital Quick Mixed Signal Setup, Easy-to-use Embedded controller design and debug trigger capabilities. Normal oscilloscope Unlike a traditional Logic Analyzer, the involves capturing and viewing a triggers will operate on digital inputs. MSO MXs-B is easy to use. A simple number of different types of signals. Cross-pattern triggering allows for sim- connection links the oscilloscope with These signals are typically a mix of ple or complex trigger patterns to be the digital inputs so users can start analog, digital, and serial data wave- setup with any combination of analog viewing signals and begin debugging forms from a combination of analog and digital ­channels. Event triggering quickly. In addition, all standard sensors, microcontrollers and peripheral can be configured to arm on an analog oscilloscope tools are readily devices. With the ability to capture digital signal and trigger on a digital pattern. accessible. Signal debug is simple, signals with speeds up to 250 MHz using standard oscilloscope tools, and long memory of 10 Mpts/Ch the such as cursors, measurement MSO MXs-B provides unmatched parameters, and zooming. mixed signal performance. The MSO MXs-B is the ideal tool for testing embedded systems with 8-bit microcontrollers or slower digital signals. With 18 digital inputs each with 250 MHz max. input frequency and 10 Mpts/Ch memory, the MSO MXs-B is an outstanding value and provides a complete set of tools for embedded system testing. 8 Serial Trigger and Decode Options Supported Serial Data Protocols • I2C, SPI, UART • CAN, LIN, FlexRay™, SENT • E thernet 10/100BaseT, USB 1.0/1.1/2.0, USB 2.0-HSIC • Audio (I2S, LJ, RJ, TDM) • MIL-STD-1553, ARINC 429 • MIPI D-PHY, DigRF 3G, DigRF v4 • Manchester, NRZ View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages. Debugging serial data busses can be confusing and time consuming. The serial data and decode options for MSO MXs-B provide time saving tools for serial bus debug and validation. Powerful Serial Data Triggers The serial data trigger will quickly Intuitive, Color-Coded Decode Overlay Table Summary and Search/Zoom isolate events on a bus eliminating Protocol decoding is shown directly To further simplify the debug process the need to set manual triggers and on the waveform with an intuitive, all decoded data can be displayed in a hoping to catch the right information. color-coded overlay and presented in table below the waveform grid. Trigger conditions can be entered in binary, hex or ASCII. Decoding on the Selecting an entry in the table with binary or hexadecimal formats and MSO MXs-B is fast even with long the touch screen will display just that conditional trigger capabilities even memory and zooming in to the event. Additionally, built-in search allow triggering on a range of differ- waveform shows precise byte by functionality will find specific de- ent events. byte decoding. coded values. 9 power Key Features • • • • • •  utomatic switching device A measurements  olor coded overlay to identify C power losses  ontrol loop and time domain C response analysis  ine power and harmonics tests L to IEC 61000-3-2  otal harmonic distortion table T shows frequency contribution  -H Curve shows magnetic B device saturation Power Analyzer Automates Switching Device Loss Measurements Quickly measure and analyze the operating characteristics of power conversion devices and circuits with the Power Analyzer option. Critical power switching device measurements, control loop modulation analysis, and line power harmonic testing are all simplified with a dedicated user interface and automatic measurements. Areas of turn-on, turn-off, and conduction loss are all identified with color-coded waveform overlays for faster analysis. Power Analyzer provides quick and easy setup of voltage and current inputs and makes measurements as simple as the push of a button. Tools are provided to help reduce sources of measurement errors and the measurement parameters provide details of single cycle or average device power losses. Beyond the advanced power loss measurement capabilities, the Power Analyzer modulation analysis capabilities provide insight to understand control loop response to critical events such as a power supply’s soft start performance or step response to line and load changes. The Line Power Analysis tool allows simple and quick pre-compliance testing to EN 61000-3-2. 10 Broad Range of Probing Solutions WaveSurfer MXs-B and MSO MXs-B support a broad range of probes for a variety of applications. ZS Series High Impedance Active Probes ZS2500, ZS1500, ZS1000, ZS2500-QUADPAK, ZS1500-QUADPAK, ZS1000-QUADPAK The ZS Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1 MΩ input resistance and low 0.9 pF input capacitance mean this probe is ideal for all frequencies. The ZS Series probes provide full system bandwidth for all Teledyne LeCroy oscilloscopes having bandwidths of 1 GHz and lower. Differential Probes (200 MHz – 1.5 GHz) ZD1500, ZD1000, ZD500, ZD200 High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make these a­ ctive differential probes ideal for applications such as automotive development (e.g. FlexRay) and failure analysis, as well as wireless and data communication design. The ProBus interface a­ llows sensitivity, offset and common-mode range to be displayed on the oscilloscope screen. High Voltage Differential Probes ADP305, ADP300, AP031 Low cost active differential probes are intended for measuring higher voltages. The d ­ ifferential techniques employed permit measurements to be taken at two points in a circuit without reference to the ground, allowing the oscilloscope to be safely grounded without the use of opto-isolators or isolating transformers. High Voltage Passive Probes PPE1.2KV, PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV The PPE Series includes five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV. All fixed-attenuation, standard probes automatically rescale compatible Teledyne LeCroy oscilloscopes for the a­ ppropriate attenuation of the probe. Current Probes CP031, CP030, AP015, CP150, CP500, DCS015 Available current probes reach bandwidths of 100 MHz, peak currents of 700 A and s­ ensitivities of 10 mA/div. Use multiple current probes to make measurements on threephase systems or a single current probe with a voltage probe to make instantaneous power measurements. Teledyne LeCroy current probes enable the design and testing of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies. 11 Specifications WaveSurfer WaveSurfer WaveSurfer WaveSurfer WaveSurfer WaveSurfer Analog Channels 24MXs-B 44MXs-B 42MXs-B 64MXs-B 62MXs-B 104MXs-B – Vertical MSO 44MXs-B MSO 64MXs-B MSO 104MXs-B Bandwidth (@ 50 Ω) 200 MHz 400 MHz 400 MHz 600 MHz 600 MHz 1 GHz Rise Time 1.75 ns 875 ps 875 ps 525 ps 525 ps 350 ps Input Channels 4 4 2 4 2 4 Vertical Resolution 8 bits Vertical Sensitivity (V/div) 2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω) Vertical (DC Gain) ±1.0% of full scale (typical); ±1.5% of full scale ≥ 10 mV/div (warranted) Accuracy BW Limit 20 MHz 20 MHz, 200 MHz Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC ≤ 5 kHz) 50 Ω: 5 Vrms 1 MΩ: 250 V max. (DC + Peak AC ≤10 kHz) Input Coupling AC, DC, GND (DC and GND for 50 Ω) Input Impedance 1 MΩ || 16 pF, or 50 Ω Analog Channels – Acquisition Sample Rate 2.5 GS/s 5 GS/s 5 GS/s (Single-shot) (10 GS/s Interleaved) Sample Rate 50 GS/s (Repetitive) Record Length 16 Mpts/Ch (all channels), 32 Mpts (interleaved) Capture Time Up to 3.2 ms at full sample rate on all four channels Acquisition Modes Real Time, Roll, RIS (Random Interleaved Sampling), WaveStream (Fast Viewing Mode), Sequence (Segmented Memory up to 5,000 segments with 1μ­s intersegment time) Time Base Range 200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div) Time Base Accuracy ≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @ 5–40 °C) Digital Channels – Vertical Input Channels Input Impedance Maximum Input Voltage Threshold Groupings Threshold Selections 18 (D0–D17) 100 kΩ || 5.0 pF ±30 V non-destruct D0–D8, D9–D17 TTL, ECL, CMOS, PECL, LVDS, User Defined 18 (D0–D17) 100 kΩ || 5.0 pF ±30 V non-destruct D0–D8, D9–D17 TTL, ECL, CMOS, PECL, LVDS, User Defined 18 (D0–D17) 100 kΩ || 5.0 pF ±30 V non-destruct D0–D8, D9–D17 TTL, ECL, CMOS, PECL, LVDS, User Defined 1 GS/s 10 Mpts/Ch 2 ns 1 GS/s 10 Mpts/Ch 2 ns 1 GS/s 10 Mpts/Ch 2 ns 250 MHz 250 MHz 250 MHz Digital Channels – Acquisition Sample Rate Record Length Minimum Detectable Pulse Width Maximum Input Frequency 12 Specifications WaveSurfer WaveSurfer WaveSurfer WaveSurfer WaveSurfer WaveSurfer 24MXs-B 44MXs-B 42MXs-B 64MXs-B 62MXs-B 104MXs-B Trigger System MSO 44MXs-B MSO 64MXs-B MSO 104MXs-B Trigger Modes Normal, Auto, Single, and Stop Trigger Sources Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger) Trigger Coupling DC, AC, HFRej, LFRej Pre-trigger Delay 0–100% of full scale Post-trigger Delay 0–10,000 divisions Trigger Hold-off 1 ns to 20 s or 1 to 1,000,000,000 events Internal Trigger ±4.1 div from center Level Range External Trigger Range EXT/10 ±4V; EXT ±400 mV Trigger Types Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate, Interval (signal or Pattern), Dropout, Qualified (State or Edge) Probes Standard Probes One PP009 (5 mm) per channel Probing System BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes One PP011 (5 mm) per channel Measure, Zoom, and Math Tools Measurement Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Delay, Parameters Duty, Fall Time (90%–10%), Fall Time (80%–20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew, Standard Deviation, Top (High), Width+, Width-. Measurements can be gated. Zooming Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area. Math Functions Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution (to 11-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof, Square, Square Root and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and FlatTop windows). 1 math function may be defined at a time, 2 functions may be chained together. Display System Display Type Display Resolution Color, 10.4” TFT-LCD Touch Screen SVGA: 800 x 600 pixels Connectivity Ethernet Port USB Ports GPIB Port (Optional) External Monitor Port Remote Control Network Communication Standard 10/100/1000Base-T Ethernet interface (RJ-45 connector) (5) USB Ports Supports IEEE – 488.2 (Optional External Adapter) Standard 15-pin D-Type SVGA-compatible DB-15 connector Via Windows Automation, or via Teledyne LeCroy Remote Command Set VXI-11 or VICP, LXI Class C Compliant Physical Dimensions (HWD) Net Weight 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25” x 13.4” x 6”) 7.26 kg. (16.0 lbs.) 13 ordering information Product Description Product Code WaveSurfer MXs-B Oscilloscopes Product Code General Accessories 200 MHz, 2.5 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4” Color Touch Screen Display. 32 Mpts Interleaved WaveSurfer 24MXs-B 400 MHz, 5 GS/s, 2 Ch, 16 Mpts/Ch DSO with 10.4” Color Touch Screen Display. 32 Mpts Interleaved 400 MHz, 5 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4” Color Touch Screen Display. 32 Mpts Interleaved 600 MHz,5 GS/s, 2 Ch, 16 Mpts/Ch DSO with 10.4” Color Touch Screen Display. 10 GS/s, 32 Mpts Interleaved 600 MHz,5 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4” Color Touch Screen Display. 10 GS/s, 32 Mpts Interleaved 1 GHz, 5 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4” Color Touch Screen Display. 10 GS/s, 32 Mpts Interleaved WaveSurfer 42MXs-B WaveSurfer 44MXs-B Keyboard Accessory Optical Mouse Accessory External GPIB Accessory Hard Carrying Case Soft Carrying Case Rack Mount Accessory Accessory Pouch WSXs-KYBD WSXs-MOUSE USB2-GPIB WSXs-HARDCASE WSXs-SOFTCASE WSXs-RACK WSXs-POUCH Mounting Accessory WaveSurfer 62MXs-B Clamp Mounting Stand WSXs-MS-CLAMP   Local Language Overlays WaveSurfer 64MXs-B WaveSurfer 104MXs-B MSO MXs-B Mixed Signal Oscilloscopes 400 MHz, 5 GS/s, 4+18 Ch, 16 Mpts/Ch MSO with 10.4” Color Touch Screen Display. 32 Mpts Interleaved MSO 44MXs-B 600 MHz, 5 GS/s, 4+18 Ch, 16 Mpts/Ch MSO with 10.4” Color Touch Screen Display. 10 GS/s, 32 Mpts Interleaved 1 GHz, 5 GS/s, 4+18 Ch, 16 Mpts/Ch MSO with 10.4” Color Touch Screen Display. 10 GS/s, 32 Mpts Interleaved MSO 64MXs-B MSO 104MXs-B Included with Standard Configuration (WaveSurfer MXs-B and MSO MXs-B) ÷10, 500 MHz, 10 MΩ Passive Probe (Total of 1 Per Channel), Getting Started Manual and Quick Reference Guide, Standard Ports: Ethernet, USB 2.0 (5), SVGA Video Out, Audio In/Out, Protective Front Cover, Anti-virus Software (Trial Version), Standard Commercial Calibration and Performance Certificate, 3-year Warranty Included with MSO MXs-B MS-250 Mixed Signal Oscilloscope Module, 18 Channel Digital Lead Set, Teledyne LeCroy Bus and USB2.0 Cables (1.3 m), Ground Extenders (Qty. 20), Flexible Ground Leads (Qty. 5), Carrying Case, Operator’s Manual and Quick Reference Guide 14 Product Description German Front Panel Overlay WSXs-A-FP-GERMAN French Front Panel Overlay WSXs-A-FP-FRENCH Italian Front Panel Overlay WSXs-A-FP-ITALIAN Spanish Front Panel Overlay WSXs-A-FP-SPANISH Japanese Front Panel Overlay WSXs-A-FP-JAPANESE Korean Front Panel Overlay WSXs-A-FP-KOREAN Chinese (Tr) Front Panel Overlay WSXs-A-FP-CHNES-TR Chinese (Simp) Front Panel Overlay WSXs-A-FP-CHNES-SI Russian Front Panel Overlay WSXs-A-FP-RUSSIAN Serial Data Options ARINC 429 Symbolic Decode Option WSXs-ARINC429bus DSymbolic Audiobus Trigger and Decode Option WSXs-Audiobus TD for I2S, LJ, RJ, and TDM CAN, LIN and FlexRay Trigger and Decode Option WSXs-AUTO CAN TD Trigger and Decode Option WSXs-CANbus TD WSXs-DPHYbus D D-PHY Decode Option DigRF 3G Decode Option WSXs-DigRF3Gbus D DigRF v4 Decode Option WSXs-DigRFv4bus D ENET Decode Option WSXs-ENETbus D FlexRay Trigger and Decode Option WSXs-FlexRaybus TD I2C, SPI and UART Trigger and Decode Option WSXs-EMB I2C Bus Trigger and Decode Option WSXs-I2Cbus TD LIN Trigger and Decode Option WSXs-LINbus TD Manchester Decode Option WSXs-Manchesterbus D MIL-STD-1553 Trigger and Decode Option WSXs-1553 TD NRZ Decode Option WSXs-NRZbus D SENT Decode Option WSXs-SENTbus D SPI Bus Trigger and Decode Option WSXs-SPIbus TD UART and RS-232 Trigger and Decode Option WSXs-UART-RS232bus TD USB 2.0 Decode Option WSXs-USB2bus D USB2-HSIC Decode Option WSXs-USB2-HSICbus D ordering information Product Description Product Code 250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s, 50 Mpts/ch Interleaved) Mixed Signal Option 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option Product Code Probes and Amplifiers* Mixed Signal Solutions 500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option Product Description MS-500 MS-500-36 MS-250 MSO MXs-B Accessories Large Gripper Probe Set for 0.10 Inch (2.54 mm) PK400-1 Pin Pitch. Includes 10 Probes with Color-coded Leads Medium Gripper Probe Set for 0.04 Inch (1.0 mm) PK400-2 Pin Pitch. Includes 10 Probes with Color-coded Leads Small Gripper Probe Set for 0.008 Inch (0.2 mm) PK400-3 Pin Pitch. Includes 10 Probes with Color-coded Leads 18-pin 3M Interface Cable MSO-3M MSO-3M (Mates with 3M Part Number 2520-6002) 36 Channel Mictor Connector MSO-Mictor (Includes 1 MSO-MICTOR-SHROUD)   Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ ZS1500-QUADPAK High Impedance Active Probe Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ High Impedance Active Probe ZS1000-QUADPAK 200 MHz, 3.5 pF, 1 MΩ Active Differential Probe ZD200 500 MHz, 1.0 pF, 1 MΩ Active Differential Probe ZD500 1 GHz, 1.0 pF, 1 MΩ Active Differential Probe ZD1000 1.5 GHz, 1.0 pF, 1 MΩ Active Differential Probe ZD1500 30 A; 100 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse CP031 30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse CP030 30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse AP015 150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500 Apeak Pulse CP150 500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700 Apeak Pulse CP500 1,400 V, 100 MHz High-Voltage Differential Probe 1,400 V, 20 MHz High-Voltage Differential Probe 1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source ADP305 ADP300 DA1855A *A wide variety of other passive, active, and differential probes are also available. Consult Teledyne LeCroy for more information. 15 Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high r­ eliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years, and our probes are warranted for one year. This warranty includes: • No charge for return shipping • Long-term 7-year support • Upgrade to latest software at no charge 1-800-5-LeCroy teledynelecroy.com Local sales offices are located throughout the world. Visit our website to find the most convenient location. © 2011 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. WSMXs-B-MSO-MXs-B-DS-29jul13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Teledyne LeCroy: MSO 104MXs-B MSO 44MXs-B MSO 64MXs-B WaveSurfer 104MXs-B WaveSurfer 24MXs-B WaveSurfer 42MXsB WaveSurfer 44MXs-B WaveSurfer 62MXs-B WaveSurfer 64MXs-B WSXS-A-FP-GERMAN WSXS-A-FP-KOREAN WSXS-A-FP-CHNES-SI WSXS-A-FP-CHNES-TR WSXS-A-FP-FRENCH WSXS-A-FP-RUSSIAN WSXS-A-FPJAPANESE WSXS-A-FP-SPANISH WSXS-A-FP-ITALIAN