WSXS-SOFTCASE

MSO Xs-A Mixed Signal Oscilloscopes 400 MHz – 1 GHz Engineered for Embedded System Design and Debug THE RIGHT TOOLS FOR EMBEDDED SYSTEM Key Features • 400 MHz, 600 MHz and 1 GHz bandwidths • 4 analog and 18 digital channels • 2.5 GS/s sample rates per channel, 5 GS/s with MSO 104Xs-A • 10 Mpts/Ch memory on all channels, all the time • Fast Processing of long memory and math • Responsive User Interface • WaveStream™ Fast Viewing Mode • WaveScan™ – Advanced Search and Find • Excellent triggering including HDTV Trigger Successful design and debug of an embedded system requires monitoring a wide range of analog, digital and serial data signals. The MSO Xs-A with its long memory, fast processing, advanced measurements and touch screen is the right tool to view these signals and ensure proper bus traffic and timing between events. Its small form factor pack a powerful processor that can handle the long 10 Mpts of memory on each of the 4 analog and 18 digital channels faster than any competing products and without any compromise of memory length or sample rate. The touch screen interface is the ultimate in ease of use and with features like WaveStream™ fast viewing mode and WaveScan™ Search and Find you can be confident that you will be able to quickly debug and solve every problem in your embedded system. Beyond the advanced measurement and triggering the MSO Xs-A offers a wide range of available serial data trigger and decode • 10.4" touch screen display tools for I2C, SPI, UART, Audiobus • LXI Compliant (I2S, LJ, RJ, TDM), MIL-STD-1553, • SMART Triggers™ capabilities for combining parallel and serial triggering CAN and LIN. With analog bandwidths from 400 MHz to 1 GHz and max digital input frequencies up to 250 MHz the MSO Xs-A is the ideal mixed signal oscilloscope for everyday design and debug. Speed and Responsiveness The MSO Xs-A was designed to shorten debug time through faster hardware and more sophisticated software. The hardware allows for fast processing of long memory even when looking at all 22 inputs with math, measurements and serial decoders. The software is designed to respond immediately to the user’s input even while processing data eliminating any lag or delay. 2 WaveScan Advanced Search Long Capture Time WaveScan allows searching in a With 10 Mpts/Ch of fast acquisition WaveStream Fast Viewing Mode single acquisition using more than memory standard the MSO Xs-A WaveStream provides a vibrant, 20 different modes. Or, set up a provides long capture time at full intensity graded (256 levels) display Scan condition and scan for an event sample rate, and allows for very long with a fast update to closely simulate over hours or days, and perform captures at lower sample rates letting the look and feel of an analog some action when it is found. Search you capture long stretches of serial bus oscilloscope. Turn WaveStream for events on any analog or digital traffic. The MSO Xs-A long memory is ON or OFF, and adjust intensity, channel or search for a pattern also thoughtfully designed to respond using the front panel knob. Use it across multiple digital channels. quickly, even when measurements, only when you want to. math, or serial decoders are being used. Keep your testing efficient with a Advanced Mixed Signal Triggering Serial Data Trigger and Decode thoughtfully designed user interface Powerful triggering allows for analog Quickly and easily locate and isolate that provides the busy engineer with and digital cross-pattern triggering of specific data on I2C, SPI, UART, a GUI that is smooth, transparent, and up to 4 analog and 18 digital channels Audiobus (I2S, LJ, RJ, TDM), easy to use. Use the touch screen as well as Qualified AB event trigger- MIL-STD-1553, CAN or LIN busses to quickly access all triggers, math ing to arm a trigger on a certain event with the optional trigger and decode functions and measurement parameters and trigger on a parallel or serial capabilities. Data is sown with a or to “draw a box” around the area pattern that follows. color-coded overlay directly on top Touch Screen Simplicity of interest and zoom all channels to of the physical layer waveform. the desired area. 3 THE INTUITIVE, POWERFUL, FLEXIBLE MSO The MSO Xs-A mixed signal oscilloscope makes everyday embedded system testing simpler and easier. The intuitive user interface and streamlined front panel make it easy to turn on and start making measurements. The interface is designed so that all triggering, decoding, measurements and functions are just one touch away 1. Digital Channel Capture Capture 18 digital lines at 1 GS/s with 10 Mpts memory on each channel 2. Digital Waveform Views View all lines individually or group them and view as a parallel bus 3. Analog Signal Capture Capture and view analog channels width bandwidths up to 1 GHz, sample rate up to 5 GS/s and 10 Mpts on each channel 4. Serial Data Decode View decoded bus information from I2C, SPI, UART, Audiobus (I2S, LJ, RJ, TDM), MIL-STD-1553, CAN and LIN on analog or digital channels with serial data trigger and decode options 5. Local Language User Interface Select from 10 languages. Add a front panel overlay with your local language 4 4 2 8 5 6. Bright 10.4" Touch Screen Display Easily operate the MSO by accessing all functionality with a touch of the screen 7 6 7. Push Knobs Trigger level, delay and offset knobs all provide shortcuts to common actions when pushed 8. WaveStream Fast Viewing Mode 3 Provides a lively, analog-like feel similar to a phosphor trace. Adjust “trace” 9 intensity with the front panel control, or toggle between LeCroy WaveStream and real-time modes 9. Dedicated Cursor Knobs Select type of cursor, position them on your signal, and read values without ever opening a menu Document and Share: • Save to on-board hard drive • Save to network drive 1 • E-mail to team members • Send to a printer • Utilize front mounted USB port 5 THE COMPLETE MIXED SIGNAL TOOLSET Analog, Digital and Cross-pattern Triggering The MSO Xs-A has an extensive set of triggering capabilities aimed at capturing a wide range of analog and digital signals. These triggers can be as simple as an edge trigger on an analog or digital channel or as complicated as a cross-pattern Set up a simple or complex cross-pattern trigger with any combination of up to 4 analog and 18 digital channels. Set the pattern with a choice of 1, 0, Rising Edge, Falling Edge, Either Edge or Don’t Care. trigger which incorporates up to 4 analog and 18 digital channels. Powerful Qualified AB event triggering allows the trigger to be armed on one event and triggered on another. The advanced triggering of the MSO Xs-A goes well beyond the basic edge trigger and digital pattern trigger that many MSOs offer. Advanced triggers like runt and dropout and slew rate help find abnormal signals. The Qualified AB trigger can be used to connect multiple trigger events together. Easy-to-use Measurement Tools Cursor and measurement parameters are important for measuring and understanding both analog and digital waveforms. The MSO Xs-A cursors will read out hexadecimal bus values and analog channel voltages simultaneously. Cursor measurements are displayed directly in the channel and group descriptor boxes which are always visible on screen. Automated measurement parameters will make measurements on both analog and digital channels with statistics to help you understand how they change over time. Use up to 6 measurements simultaneously and make measurements on analog, digital or a combination of both. Measurements are quickly set up using the touch screen menus. 6 SERIAL DATA TRIGGER AND DECODE Complete I2C, SPI, UART, RS-232, Audiobus (I2S, LJ, RJ, TDM), MIL-STD-1553, CAN and LIN Serial Triggering Quickly and easily isolate specific serial data events on your embedded controller for better understanding and faster debug. Set up trigger conditions in binary and hexadecimal formats. Use the digital channels to capture serial data busses keeping the analog oscilloscope channels open for other uses. Trigger on DATA in specific locations of long I2C EEPROM reads. Get complete control of your debug process and finish faster. specific sub-address memory blocks Powerful Conditional Data Triggering in the EEPROM. It can also aid in Table Summary and Search/Zoom monitoring DATA outputs from Turn your oscilloscope into a protocol sensors, such as analog-to-digital analyzer with the Table display of converters, and triggering when DATA protocol information. Customize is outside a safe operating range. In the table, or export Table data to an both cases, verifying proper operation Excel file. Touch a message in the becomes a simple task. table and automatically zoom for detail. Search for specific address Completely isolate specific message Intuitive, Color-Coded Decode Overlay events for better understanding and Advanced software algorithms debug. Use a conditional trigger to deconstruct the waveform into binary, select a range of values to trigger on, hex, or ASCII protocol information, not just a single value. For example, then overlay the decoded data on oftentimes I2C utilizes DATA bytes to the waveform. specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to or data values in the acquisition. Various sections of the protocol are color-coded to make it easy to understand. The decode operation is fast—even with long acquisitions. 7 LECROY WAVESCAN ADVANCED SEARCH WaveScan provides powerful isolation capabilities that hardware triggers can’t provide. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search), or “scan” for an event in many acquisitions over a long period of time. Select from more than 20 search modes to find events on any analog or digital channel or search for a pattern across multiple digital channels. WaveStream Fast Viewing Mode WaveStream provides a vibrant, intensity graded (256 levels) display with a fast update rate to closely simulate the look and feel of an analog oscilloscope. WaveStream is most helpful in viewing signals that have signal jitter or signal anomalies, or for applying a visual check before creating an advanced trigger or WaveScan setup to locate an unusual event. Since the sampling rate in WaveStream mode can be as high as 5 GS/s (up to 2.5x that of other oscilloscopes), it is an excellent runt or glitch finder. Since the scanning Timing jitter is often visually assessed “modes” are not simply to understand approximate behavior. copies of the hardware WaveStream makes it easy to triggers, the utility and understand jitter on edges or in eye diagrams. WaveStream also excels capability is much higher. 8 For instance, there is no “frequency” acquisitions, WaveScan builds on in allowing you to relate composite trigger in any oscilloscope, yet the traditional LeCroy strength of (WaveStream) to single-event (real- WaveScan allows for “frequency” fast processing of data. A LeCroy time sampled) behaviors. Just capture to be quickly “scanned.” This allows X-Stream oscilloscope will quickly in WaveStream mode, toggle to view the user to accumulate a data set scan millions of events looking for or zoom a single trace, then toggle of unusual events that are separated unusual occurrences, and do it much back to WaveStream mode. by hours or days, enabling faster faster and more efficiently than other debugging. When used in multiple oscilloscopes can. PROBES, ACCESSORIES, AND OPTIONS LeCroy offers an extensive range of probes, accessories, and options for the MSO Xs-A. Leverage your investment with these items. ZS Series High Impedance Active Probes AP031 Leading Features: Leading Features: • 1 GHz (ZS1000) and 1.5 GHz (ZS1500) bandwidths • Lowest priced differential probe • High Impedance (0.9 pF, 1 MΩ) • 700 V maximum input voltage • Extensive standard and available probe tip and ground connection accessories • Works with any 1 MΩ input oscilloscope • ±12 Vdc offset (ZS1500) AP033, AP034 • LeCroy ProBus system Leading Features: • 15 MHz bandwidth • 500 MHz and 1 GHz bandwidth ADP305, ADP300 Leading Features: • 10,000:1 CMRR • Wide dynamic range, low noise • 20 MHz and 100 MHz bandwidth • LeCroy ProBus system • 1,000 Vrms common mode voltage • 1,400 Vpeak differential voltage • EN 61010 CAT III • 80 dB CMRR at 50/60 Hz Extended Math Option Adds 12 additional math functions, chaining of two math functions, rescaling with unit selection, and 1 Mpt FFTs. • LeCroy ProBus system PPE1.2KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV, PPE20KV I2C, SPI, UART, RS-232, Audiobus (I2S, LJ, RJ, TDM), MIL-STD-1553, CAN and LIN Trigger and Decode Options Leading Features: • Suitable for safe, accurate high-voltage measurements • 1.2 kV to 20 kV • Works with any 1 MΩ input oscilloscope Powerful serial triggering, including conditional data triggering, intuitive, color-coded decode overlay, search, CP030, CP031 and table display. Leading Features: • 30 Arms continuous current (50 Apeak) • 50 or 100 MHz bandwidth • Small form factor accommodates large conductors with small jaw size • LeCroy ProBus system 9 MSO Xs-A SPECIFICATIONS Analog Channels Bandwidth (@ 50 Ω) Rise Time Input Channels Display Sample Rate (single-shot) Sample Rate (RIS mode) Standard Record Length Standard Capture Time Vertical Resolution Vertical Sensitivity (V/div) Vertical (DC Gain) Accuracy BW Limit Maximum Input Voltage Input Coupling Input Impedance Probing System Probes MSO 44Xs-A MSO 64Xs-A MSO 104Xs-A 400 MHz 875 ps 600 MHz 500 ps 1 GHz 300 ps 4 10.4" Color flat-panel TFT-LCD, 800 x 600 SVGA, touch screen 2.5 GS/s 50 GS/s 10 Mpts/Ch (all channels) Up to 2 ms at full sample rate on all four channels 8-bits 2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω) ±1.0% of full scale (typical); ±1.5% of full scale ≥ 10 mV/div (warranted) 20 MHz, 200 MHz 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC ≤ 5 kHz) AC, DC, GND (DC and GND for 50 Ω) 1 MΩ || 16 pF, or 50 Ω BNC or ProBus One PP009 (5 mm) per channel (standard) 5 GS/s 50 Ω: 5 Vrms 1 MΩ: 250 V max. (DC + Peak AC ≤ 10 kHz) 1 MΩ || 20 pF, or 50 Ω One PP011 (5 mm) per channel (standard) Digital Channels Number of Channels Maximimum Input Frequency Sample Rate (per Ch) Record Length (per Ch) Threshold Groupings Threshold Levels Input Impedance Maximum Input Voltage 18 250 MHz 1 GS/s 10 Mpts D0–D8, D9–D17 TTL, ECL, CMOS (2.5 V, 3.3 V, 5 V), PECL, LVDS or User Defined 100 kΩ || 5.0 pF ± 30 V non-destruct Horizontal and Trigger Timebase Range Timebase Accuracy Trigger Modes Trigger Sources Trigger Coupling Pre-trigger Delay Post-trigger Delay Trigger Hold-off Internal Trigger Level Range External Trigger Range 10 200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div) ≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @ 5–40 °C) Normal, Auto, Single, and Stop Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger) DC, AC, HFRej, LFRej 0–100% of full scale 0–10,000 divisions 1 ns to 20 s or 1 to 1,000,000,000 events ±4.1 div from center EXT/10 ±4V; EXT ±400 mV MSO Xs-A SPECIFICATIONS Trigger Types Standard MSO 44Xs-A MSO 64Xs-A MSO 104Xs-A Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV – 720p, 1080i, 1080p), Runt, Slew Rate, Interval (Signal or Pattern), Dropout, Qualified (State or Edge) Measure, Zoom, and Math Tools Standard Parameter Measurements Zooming Standard Math Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Delay, Duty, Fall Time (90%-10%), Fall Time (80%-20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10%-90%), Rise Time (20%-80%), RMS, Skew, Standard Deviation, Top (High), Width+, Width-. Measurements can be gated. Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area. Operators include Sum, Difference, Product, Ratio, and FFT (up to 25 kpts with power spectrum output and rectangular, VonHann, and FlatTop windows). 1 math function may be defined at a time. Physical (MS-250) Dimensions (HWD) Weight Leadset Length 1.5" x 4.25" x 8.375" (3.8 x 10.8 x 21.2 cm) 1.7 lbs. (.775 kg) 16" (40.65 cm) Physical (Base Oscilloscope) Dimensions (HWD) Net Weight 10.25" x 13.4" x 6" (26 cm x 34 cm x 15 cm) Excluding accessories and projections 16.0 lbs. (7.26 kg.) Option Extended Math (WSXs-MATHSURF Option) Adds the following additional math functions: Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution (to 11- bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof, Square, and Square Root. Also adds chaining of two math functions and 1 Mpt FFTs. 11 ORDERING INFORMATION Product Description Product Code MSO Xs-A Mixed Signal Oscilloscopes MSO 104Xs-A MSO 64Xs-A Chinese (Tr) Front Panel Overlay Chinese (Simp) Front Panel Overlay Russian Front Panel Overlay MSO 44Xs-A Software Options Extended Math Software Package Electrical Telecom Mask Test Software Package Windows Lockout Software Option Included with Standard Configuration MS-250 Mixed Signal Oscilloscope Option Advanced Triggering with LeCroy SMART Triggers ÷10, 500 MHz, 10 MΩ Passive Probe (Total of 1 Per Channel) Getting Started Manual and Quick Reference Guide Standard Ports: 10/100Base-T Ethernet, USB 2.0 (5), SVGA Video out, Audio in/out, RS-232 Protective Front Cover Anti-virus Software (Trial Version) Standard Commercial Calibration and Performance Certificate 3-year Warranty I2C Trigger and Decode Option UART and RS-232 Trigger and Decode Option SPI Trigger and Decode Option LIN Trigger and Decode Option CAN Trigger and Decode Option Audiobus Trigger and Decode Option for I2S, LJ, RJ and TDM MIL-STD-1553 Trigger and Decode Option PK400-1 PK400-2 PK400-3 MSO-3M General Accessories WSXs-KYBD WSXs-MOUSE WS-GPIB WSXs-HARDCASE WSXs-SOFTCASE WSXs-RACK WSXs-POUCH Mounting Accessory WSXs-MS-CLAMP Local Language Overlays 1-800-5-LeCroy www.lecroy.com WSXs-MATHSURF WSXs-ET-PMT WSXs-LOCKOUT WSXs-I2Cbus TD WSXs-UART-RS232bus TD WSXs-SPIbus TD WSXs-LINbus TD WSXs-CANbus TD WSXs-Audiobus TD WSXs-1553 TD Probes and Amplifiers* Large Gripper Probe Set for 0.10" (2.54 mm) Pin Pitch, Includes 10 Color-coded Probes Medium Gripper Probe Set for 0.04" (1.0 mm) Pin Pitch, Includes 10 Color-coded Probes Small Gripper Probe Set for 0.008" (0.2 mm) Pin Pitch, Includes 10 Color-coded Probes 18-pin 3M Interface Cable (Mates with 3M Part Number 2520-6002) German Front Panel Overlay French Front Panel Overlay Italian Front Panel Overlay Spanish Front Panel Overlay Japanese Front Panel Overlay Korean Front Panel Overlay WSXs-A-FP-CHNES-TR WSXs-A-FP-CHNES-SI WSXs-A-FP-RUSSIAN Serial Data Options Mixed Signal Accessories Clamp Mounting Stand Product Code Local Language Overlays 1 GHz, 5 GS/s, 4 + 18 Ch, 10 Mpts/Ch MSO with 10.4" Color Touch Screen Display 600 MHz, 2.5 GS/s, 4 + 18 Ch, 10 Mpts/Ch MSO with 10.4" Color Touch Screen Display 400 MHz, 2.5 GS/s, 4 + 18 Ch, 10 Mpts/Ch MSO with 10.4" Color Touch Screen Display Keyboard Accessory Optical Mouse Accessory External GPIB Accessory Hard Carrying Case Soft Carrying Case Rack Mount Accessory Accessory Pouch Product Description WSXs-A-FP-GERMAN WSXs-A-FP-FRENCH WSXs-A-FP-ITALIAN WSXs-A-FP-SPANISH WSXs-A-FP-JAPANESE WSXs-A-FP-KOREAN Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ ZS1500-QUADPAK High Impedance Active Probe Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ ZS1000-QUADPAK High Impedance Active Probe 1 GHz Active Differential Probe (÷1, ÷10, ÷20) AP034 500 MHz Active Differential Probe (x10, ÷1, ÷10, ÷100) AP033 30 A; 100 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse CP031 30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse CP030 30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse AP015 150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500 Apeak Pulse CP150 500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700 Apeak Pulse CP500 1,400 V, 100 MHz High-Voltage Differential Probe ADP305 1,400 V, 20 MHz High-Voltage Differential Probe ADP300 1 Ch, 100 MHz Differential Amplifier DA1855A with Precision Voltage Source *A wide variety of other passive, active, and differential probes are also available. Consult LeCroy for more information. Customer Service LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years, and our probes are warranted for one year. This warranty includes: • No charge for return shipping • Long-term 7-year support • Upgrade to latest software at no charge Local sales offices are located throughout the world. Visit our website to find the most convenient location. © 2010 by LeCroy Corporation. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. MSOXs-ADS-21Jul10 PDF