10-00124

part number: 10-00124 description: Cable, 2000 mm, 50-00011 right angle locking dc plug to stripped tinned, 18 AWG, UL2468 Specifications: plug description (1) plug overmold (2) cable description (3) cable outer diameter cable color cable gauge cable length twist tie (4) rated load date: unit: page: rev: 05/28/09 mm 1 of 3 A Ø2.50 x 5.50 x 30 ± 0.5, black insulator, P/N 50-00011 30P, PVC, black UL2468, 0.16 x 41 strands, twin wire 4.4 (2.2 x 2) ± 0.1 black AWG #18 2000 ± 50 black, 89 ± 3 12 Vdc @ 5 A Notes: Function test: no open, no reversed polarity, no short circuit, no INT Hi-POT test: 600 Vac, 0.5 mA, 1 sec. RoHS compliant Mechanical drawing: Initial Date tolerance X: ±0.5 mm .X: ±0.3 mm .XX: ±0.05 mm 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com part number: 10-00124 description: Cable, 2000 mm, 50-00011 right angle locking dc plug to stripped tinned, 18 AWG, UL2468 date: unit: page: rev: 05/28/09 mm 2 of 3 A Cable specifications: conductors gauge material cord size jacket material color diameter electrical & physical properties rated voltage rated temperature insulation resistance resistance @ 20 °C spark test material unaged aging test tensile strength (kfg/mm min) 2 18 AWG brass copper 41/0.16 BC F0068C 48PB (4026) black Ø4.4 (2.2 x 2) ± 0.10 300 V 80 °C 0.76 (15.6 °C) mΩ / m min. 21.8 mΩ/m max 5.0 KV insulation 1.05 100 113°C/168 h 65 75 ≤50% OK OK VW-1 elongation (%min) condition elongation (% unaged min) tensile strength (% unaged min) deformation (121± 1 °C x 1 hour) cold bend (-10 ± 1 °C x 1 hour) heat shock (121 ± 1 °C x 1 hour) flame test Cable cross section: conductor PVC insulation 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com part number: 10-00124 description: Cable, 2000 mm, 50-00011 right angle locking dc plug to stripped tinned, 18 AWG, UL2468 date: unit: page: rev: 05/28/09 mm 3 of 3 A Revision notes: Rev A Date May 28, 2009 Description initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. Signature Name Title Date 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com