10-00529

part number: description: 10-00529 Cable, 1830 mm, 7P 90° DIN male 50-00174, to stripped tinned, 26 AWG, UL2464 30-00064, shielded date: March 10, 2011 rev: A page: 1 of 2 Specifications: connector description (1) 7P standard DIN male, molding style, brass, nickel plating, 270°, P/N 50-00174 overmold (2) inner: PE; outer: 60P, PVC, black wire description (3) 7C, 26 AWG, UL2464, 300V, 80C, 5.6 mm, shielded, VW-1, PVC, 60P, P/N 30-00064 cable outer diameter Ø5.6 mm cable color black cable length 1830 ± 50 mm twist tie (4) black shrink tube (5) Ø6.0, 105°C, 10 ± 2 mm, black shrink tube (6) Ø1.0, 105°C, 30 ± 5 mm, black current rating 300 mA @ 12 Vdc Notes: Function test: no open, no reversed polarity, no short circuit, no INT RoHS compliant Mechanical drawing: Units: mm tolerance X: ±0.5 mm .X: ±0.3 mm .XX: ±0.05 mm applicable unless otherwise indicated in specification or on drawings Tensility International Corporation reserves the right to substitute parts which are functionally equivalent to the ones specified. Initial Date part number: description: 10-00529 Cable, 1830 mm, 7P 90° DIN male 50-00174, to stripped tinned, 26 AWG, UL2464 30-00064, shielded date: March 10, 2011 rev: A page: 2 of 2 Revision notes: Rev Date Description A March 10, 2011 initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. Signature Title Name Date Company Branch