50-00027

0 2.5 -0.10 +0.20 5.5 0 Materials 1. Shell, C3604 brass, 2 μm nickel plated 2. Insulator, PBT+ 15% GF, UL 94 HB, black 3. Pin, C3604 brass, 2 μm nickel plated 4. Spring contact, C5191 phosphor bronze, 2 μm nickel plated  Electrical requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less  Mechanical requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.3-3 kgf Durability: 5000 mating cycles while maintaining; 0.3 kgf min. insertion force, 0.2 kgf min. withdrawal force and a less than 100 mΩ contact resistance.  Environmental requirements Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain dielectric strength of 500 Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less.  Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less.  Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ.  1 4 2 3 1.3 ±0.30 11.5 ±1 SECTION A-A A 8 ±0.05 1.5 1 A 2.2 6.5 15 ±0.30 17.4 ±0.50 Revision: Date: Description: A 09/02/2009 Intiial release A1 11/09/2012 Added test data A2 05/24/2018 Changed material 5 Prepared: Verified: MP JD Digitally signed by MP Date: 2023.03.13 10:44:45 -07'00' Digitally signed by JD Date: 2023.03.13 14:54:34 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 4 Notes: RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, dc jack, 5.5x2.5xL17.4 mm, molding style 3 Size: Part number: A 50-00027 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 3:1 Sheet 1 of 2 1 Ratings Operating Voltage: 48 Vdc Max Current: 8 A Operating Temperature Range -25 to 70°C, relative humidity of 85% or less Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Revision: Date: Description: A 09/02/2009 Intiial release A1 11/09/2012 Added test data A2 05/24/2018 Changed material 5 Prepared: Verified: MP JD Digitally signed by MP Date: 2023.03.13 10:45:03 -07'00' Digitally signed by JD Date: 2023.03.13 14:54:43 -07'00' Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 4 Notes: RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, dc jack, 5.5x2.5xL17.4 mm, molding style 3 Size: Part number: A 50-00027 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Sheet 2 of 2 2:1 1