50-00187

Materials 1. Insulator: PBT, black 2. Shell: C3604 brass, 2 μm nickel plated 3. Spring contact: C5191 phosphor bronze, 2 μm nickel plated Electrical Requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less 2 1 3 2.4 Mechanical Requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.3-3 kgf Life cycle: 5000 mating cycles while maintaining 0.3-2.0 kgf min. insertion force, 0.2-1.5 kgf min. withdrawal force and less than 100 mΩ contact resistance. 1. 5 Environmental Requirements Heat test: 70 °C, relative humidity 70-85% for 96 hours while maintaining insulation resistance: 50 MΩ @ 500Vdc, without deformation and contact resistance: 100 mΩ or less Humidity test: 40 °C, relative humidity 90-100% for 96 hours while maintaining dielectric strength: 1 min @ 500 Vac, insulation resistance: 50 MΩ @ 500 Vdc, and contact resistance: 100 mΩ or less Salt spray test: 35 °C, relative humidity 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ. 10.5 ±0.50 0 5.5 -0.05 +0.10 2.5 0 SECTION A-A 0.8 5.3 ±0.20 6.3 ±0.30 A A 1.5 ±0.10 0.5 ±0.10 2 1.8 ±0.20 2 ±0.30 15.8 ±0.30 20.5 ±0.50 Revision: Date: Description: A 11/28/2011 Initial release A1 11/09/2012 Added test data A2 12/06/2012 Updated item description A3 06/15/2016 Modified insulator OD 5 Prepared: AW Verified: PS Digitally signed by AW Date: 2019.09.30 15:13:31 -07'00' Digitally signed by PS Date: 2019.09.30 15:25:07 -07'00' Dimensions are in millimeters. Tolerances: 0.3 mm X: X.X: 0.2 mm X.XX: 0.05 mm 4 Notes: RoHS compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, dc plug, 5.5x2.5xL20.5 mm, molding style, spring contacts 3 Size: Part number: A 50-00187 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 4:1 Sheet 1 of 2 1 Ratings Maximum Operating Voltage: 48 Vdc Maximum Operating Current: 6.5 A Operating Temperature Range -25° to 70 °C, relative humidity of 85% or less Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Revision: Date: Description: A 11/28/2011 Initial release A1 11/09/2012 Added test data A2 12/06/2012 Updated item description A3 06/15/2016 Modified insulator OD 5 Prepared: AW Verified: PS Digitally signed by AW Date: 2019.09.30 15:13:46 -07'00' Digitally signed by PS Date: 2019.09.30 15:24:51 -07'00' Dimensions are in millimeters. Tolerances: X: 0.3 mm X.X: 0.1 mm X.XX: 0.05 mm 4 Notes: RoHS compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, dc plug, 5.5x2.5xL20.5 mm, molding style, spring contacts 3 Size: Part number: A 50-00187 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 4:1 Sheet 2 of 2 1