50-00491

Materials 1. Shell, stainless steel, nickel plated 2. Pins, brass, 5 μ" gold and tin plating 3. Insulator, PBT, black USB A jack molding style Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 500 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less 14.5 ±0.20 13.2 ±0.15 5.7 ±0.15 Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycle minimum life; less than 100 mΩ contact resistance, minimum 100 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction without damage or looseness 2 11 Pin 4 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds gold plating 1 Pin 1 3 tin plating 6 7.1 ±0.20 15 ±0.20 0.3 A Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation 2.5 1 Operating range -40 ~ 85 °C A 1.1 2 0.3 2 0.6 SECTION A-A 1.8 7 2.33 Revision: A A1 Date: 12/16/2015 07/24/2018 Description: Prepared: GL Initial release Notes: Digitally signed by GL Date: 2018.08.06 09:24:23 -07'00' RoHS and REACH compliant Digitally signed by RS Date: 2018.08.09 09:26:59 -07'00' Function test: no open, no short circuit, no intermittent Verified: Corrected operating temp range RS Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 4 tel fax Description: Connector, USB A Jack, molding style, 180°, nickel shell, ground, black insulator 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 50-00491 Scale: 800 web 877.670.7118 tensility.com Sheet 1 of 1 2:1 1