54-00001

14.5 2 3 4 2.2 7.1 3.8 1 0.65 3.1 5.2 ±0.20 5.1 11.1 2.5 2 2.5 12.8 ±0.5 15.8 ±0.50 1.3 5.7 2.5 2.5 2.5 0. 9 A1 09/28/2015 07/24/2018 Description: Prepared: GL Initial release Corrected operating temp range Verified: RS Notes: Digitally signed by GL Date: 2018.08.06 09:26:39 -07'00' Digitally signed by RS Date: 2018.08.09 09:44:03 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 4 ) A Date: ) (x2 10.1 Revision: (x4 PCB Layout 7 2 2 3 4 2. 3 0.2 2.5 1 12.8 14 10.3 10.3 2.9 0.3 14 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB A jack PCB mount, 90°, nickel shell, board lock, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00001 Scale: 800 web 877.670.7118 tensility.com 2:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB A jack 90° PCB mount 12.5 Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 500 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycle minimum life; less than 100 mΩ contact resistance, minimum 100 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction for 15 seconds without damage or looseness 1 3 2 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Tin plating 14 Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation 2.5 2.9 10.3 Gold plating 2.5 2 2 3 4 12.8 Pin plating detail 2.5 1 (x4 ) 2. 3 PCB Layout 0. 9 Operating range -40 ~ 85 °C (x2 ) Revision: A A1 Date: 09/28/2015 07/24/2018 Description: Prepared: GL Initial release Notes: Digitally signed by GL Date: 2018.08.06 09:26:57 -07'00' RoHS and REACH compliant Digitally signed by RS Date: 2018.08.09 09:43:44 -07'00' Function test: no open, no short circuit, no intermittent Verified: Corrected operating temp range RS Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 4 tel fax Description: Connector, USB A jack PCB mount, 90°, nickel shell, board lock, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00001 Scale: 800 web 877.670.7118 tensility.com 2:1 Sheet 2 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB A jack 90° PCB mount Materials 1. Shell, steel, nickel plated 2. Pins, brass, 5 μ" gold and tin plating 3. Insulator, PBT, black