54-00003

14.5 ±0.20 2 3 4 4 ±0.2 1 7 5.7 ±0.20 7.1 ±0.20 13.1 12.8 ±0.5 15.8 ±0.5 14 10.3 1.5 0.3 1.0 x 2.5 (x4) 4 2.5 2 2.5 2 3 12.8 13.1 10.3 14 ±0.20 1 3 2. 1.2 2.5 2) (x PCB Layout 0.2 0.7 7 2 2.5 Revision: A Date: 09/28/2015 Description: Prepared: Initial release AG A1 07/24/2018 Corrected operating temp range A2 9/4/2018 Changed insulator material 5 Verified: PS Notes: Digitally signed by AG Date: 2018.09.05 13:54:16 -07'00' Digitally signed by PS Date: 2018.09.05 14:03:31 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 4 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB A jack, SMT mount, 90°, nickel shell, board lock, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00003 Scale: 800 web 877.670.7118 tensility.com 2:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB A jack 90° SMT mount Materials 1. Shell, steel, nickel plated 2. Pins, brass, 5 μ" gold and tin plating 3. Insulator, PA46, black USB A jack 90° SMT mount Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 500 Vac for 1 min without damage Insulation resistance: 500 MΩ after 500 Vdc for 1 min Contact resistance: 50 mΩ or less Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycles unloaded, while maintaining: Contact resistance: 100 mΩ, Insulation resistance: 100 MΩ Dielectric strength: 100 Vac for 1 min without damage Terminal strength: 0.3 kgf in any direction for 15 seconds without damage or looseness 3 1 2 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 255 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 260 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds 14 10.3 1.0 x 2.5 (x4) Tin Pin plating detail 4 09/28/2015 PCB Layout Description: Prepared: Initial release AG A1 07/24/2018 Corrected operating temp range A2 9/4/2018 Changed insulator material 5 2 Notes: Digitally signed by AG Date: 2018.09.05 13:54:30 -07'00' Verified: PS Digitally signed by PS Date: 2018.09.05 14:01:30 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 4 2) (x A Date: 3 2. Operating range -40 ~ 85 °C 2.5 12.8 13.1 2 3 2.5 1 Gold Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation Revision: 1.5 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB A jack, SMT mount, 90°, nickel shell, board lock, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00003 Scale: 800 web 877.670.7118 tensility.com 2:1 Sheet 2 of 2 1