54-00018

12.1 8.45 5.5 4.8 3.2 2.8 07/30/2018 Prepared: GL 0 .3 Initial release Verified: Corrected operating temp range RS 4 PCB Layout Notes: Digitally signed by GL Date: 2018.08.06 10:51:30 -07'00' Digitally signed by RS Date: 2018.08.09 10:39:09 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 10.4 4.8 ) A1 10-22/2015 Description: 1 (x4 A Date: 4 ) x2 Revision: 10.4 2 2( 14.7 3 0. 9 2.5 2 2.5 0.25 0.6 12.1 4 3 3 3.2 13.2 11.8 1 7.8 10.8 2 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB B Jack, PCB mount, 90°, nickel shell, shielded, board lock, white insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00018 Scale: 800 web 877.670.7118 tensility.com 2:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB B jack 90° PCB mount 16.2 Materials 1. Shell, steel, nickel plated 2. Pins, phosphor bronze, 5 μ" gold and tin plating 3. Insulator, PBT + 30% GF, white, 94 V-0 USB B jack 90° PCB mount Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 1000 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less 3 Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycle minimum life; less than 100 mΩ contact resistance, minimum 50 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction for 15 seconds without damage or looseness 1 2 13.2 Gold Pin plating detail Operating range -40 ~ 85 °C 2 3 2 4 1 2.5 Tin 12.1 Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation 4.8 07/30/2018 Prepared: GL Initial release Corrected operating temp range Verified: RS Digitally signed by GL Date: 2018.08.06 10:51:47 -07'00' Digitally signed by RS Date: 2018.08.09 10:39:29 -07'00' Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 4 ) A1 10-22/2015 Description: (x4 A Date: ) x2 PCB Layout 0. 9 2( 10.4 Revision: 11.8 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Notes: RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB B Jack, PCB mount, 90°, nickel shell, shielded, board lock, white insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00018 Scale: 800 web 877.670.7118 tensility.com Sheet 2 of 2 2:1 1