54-00019

7.7 9.2 9.2 8.9 7.65 3.95 Ø 0.7 (x5) 3 4 CL 2 7.3 1.6 3.2 7.7 5.9 5.8 5 5 4 1 1 0.25 1.5 7.65 8.9 0.4 3.95 0.35 1.6 PCB Layout 1.8 x 0.7 (x2) 3.2 Revision: A A1 Date: 09/28/2015 07/30/2018 Description: Prepared: Initial release AG Verified: Corrected operating temp range JD Notes: Digitally signed by AG Date: 2021.12.16 08:32:40 -08'00' Digitally signed by JD Date: 2021.12.16 11:28:00 -08'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 4 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB mini B Jack, PCB mount, 90°, nickel shell, DIP, black insulator, tube 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00019 Scale: 800 web 877.670.7118 tensility.com 4:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB mini B jack 90° PCB mount Materials 1. Shell, phosphor bronze, nickel plated 2. Pins, phosphor bronze, 5 μ" gold and tin plating 3. Insulator, Nylon 46, black USB mini B jack 90° PCB mount Electrical Rated voltage: 30 Vdc Rated current: 2 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less 2 3 Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 0.7 kgf minimum Durability: 5000 cycle minimum life; less than 100 mΩ contact resistance, minimum 50 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction without damage or looseness 1 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 255 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 260 ±5 °C up to surface of the board for 10 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds 9.2 8.9 7.65 Tin 3.95 Ø 0.7 (x5) Gold 1.6 3.2 7.7 5 3 Pin plating detail 4 1 Operating range -40 ~ 85 °C PCB Layout Revision: A A1 Date: 09/28/2015 07/30/2018 Description: Prepared: AG Initial release Verified: Corrected operating temp range JD 4 1.8 x 0.7 (x2) Notes: Digitally signed by AG Date: 2021.12.16 08:32:20 -08'00' RoHS and REACH compliant Digitally signed by JD Date: 2021.12.16 11:44:21 -08'00' Function test: no open, no short circuit, no intermittent Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 CL 2 7.3 Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation tel fax Description: Connector, USB mini B Jack, PCB mount, 90°, nickel shell, DIP, black insulator, tube 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00019 Scale: 800 web 877.670.7118 tensility.com Sheet 2 of 2 4:1 1