54-00021

10 7.85 0.35 1.6 3.2 Dust cover 0.4 1.5 5.4 2.5 2.6 1.9 5.9 9.25 11 0.4 Ø1.1 (x2) 4.4 3.2 1.6 0.5 5 4 3 2 1 4 0.25 4.8 6.7 9.35 0.8 4.4 5.9 9.8 Revision: A A1 Date: 09/28/2015 07/30/2018 Description: Notes: Prepared: GL Initial release Verified: Corrected operating temp range RS Digitally signed by GL Date: 2018.08.06 11:07:57 -07'00' Digitally signed by RS Date: 2018.08.09 11:07:57 -07'00' Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 4 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB mini B Jack, SMT mount, 90°, nickel shell, black insulator, reel 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00021 Scale: 800 web 877.670.7118 tensility.com Sheet 1 of 2 5:1 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB mini B jack 90° SMT mount 5.4 Materials 1. Shell, phosphor bronze, nickel plated 2. Pins, phosphor bronze, 5 μ" gold and tin plating 3. Insulator, Nylon, black USB mini B jack 90° SMT mount 2 Electrical Rated voltage: 30 Vdc Rated current: 2 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 0.7 kgf minimum Durability: 5000 cycle minimum life; less than 100 mΩ contact resistance, minimum 50 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction for 15 seconds without damage or looseness 5.4 2.5 2.6 3 1 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 255 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 260 ±5 °C up to surface of the board for 10 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds 1.9 5.9 Operating range -40 ~ 85 °C Ø1.1 (x2) 4.4 Gold 5 4 3 2 1 6.7 3.2 1.6 0.5 Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation 11 Tin Pin plating detail 9.8 Revision: A A1 Date: 09/28/2015 07/30/2018 Description: Prepared: GL Initial release Verified: RS Corrected operating temp range Notes: Digitally signed by GL Date: 2018.08.06 11:08:16 -07'00' RoHS and REACH compliant Digitally signed by RS Date: 2018.08.09 11:06:28 -07'00' Function test: no open, no short circuit, no intermittent Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 4 tel fax Description: Connector, USB mini B Jack, SMT mount, 90°, nickel shell, black insulator, reel 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00021 Scale: 800 web 877.670.7118 tensility.com Sheet 2 of 2 5:1 1