54-00063

Materials 1. Insulator: PBT, black 2. Pin: copper alloy, nickel plated 3. Shell: brass, nickel plated 4. Spring contact: stainless steel, nickel plated 5. Spring contact collar: copper alloy, nickel plated 6. Solder tab: brass, nickel plated 7. Washer p/n 56-00001: cold rolled steel, nickel plated 8. Nut p/n 56-00000: brass, nickel plated 3 2.1 5.5 Ratings Operating temperature range: -10° to 60° C Flammability: UL 94 V-0 6 2 4 1 Mating Plug 5 Electrical Requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less 7 8 SECTION A-A 24.2 ±0.50 16.2 A Soldering Solderability: 75% minimum coverage when terminals dipped 2mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C bath for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds A 9.6 0 2 -0.05 10.8 10.3 12.5 ±0.30 5.7 2.5 Mechanical Requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.2-3 kgf Terminal strength: a static load of 150 gf shall be applied to the terminal for 15 seconds in any direction. Life cycle: 5000 mating cycles while maintaining less than100 mΩ contact resistance, 50MΩ insulation resistance minimum, and dielectric strength of 500 Vac for 1 minute withstand voltage. 2 13 1.5 Environmental Requirements Cold test: -25 ±3 °C for 48 hours without deformation Heat test: 70 ±2 °C, for 48 hours without deformation Humidity test: 40 ±2 °C, relative humidity 90-95% for 48 hours without deformation 8 4.2 1.5 Installation Details A 3 Panel thickness: 1.0 - 4.5 mm B 1.4 Panel cutout Ø: 11.0 - 12.0 mm Schematic M11 x 1.0 Revision: A Date: 8/05/2016 Description: Initial release A1 1/04/2017 Updated materials list A2 8/25/2017 Updated notes 5 Prepared: RS Notes: Digitally signed by RS Date: 2018.11.01 11:39:34 -07'00' RoHS compliant Digitally signed by PS Date: 2018.11.05 13:23:06 -08'00' Function test: no open, no short circuit, no intermittent Verified: PS Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 4 tel fax 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Size: Part number: Description: Connector, dc jack, 5.5x2.1xL24.2 mm, panel mount, 54-00063 A threaded, nut and washer, brass, nickel Scale: 2:1 3 2 Sheet 1 of 2 1 Ratings Maximum Operating Voltage: 48 Vdc Maximum Operating Current: 6.5 A Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or othercircuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Revision: A Date: 8/05/2016 Description: Initial release A1 1/04/2017 Updated materials list A2 8/25/2017 Updated notes 5 Prepared: RS Notes: Digitally signed by RS Date: 2018.11.01 11:39:54 -07'00' Verified: PS Digitally signed by PS Date: 2018.11.05 13:23:18 -08'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 4 RoHS compliant Function test: no open, no short circuit, no intermittent tel fax 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Size: Part number: Description: Connector, dc jack, 5.5x2.1xL24.2 mm, panel mount, 54-00063 A threaded, nut and washer, brass, nickel Scale: 2:1 3 2 Sheet 2 of 2 1